Reddit reviews Kwik Thumb Stud - Stainless

We found 15 Reddit comments about Kwik Thumb Stud - Stainless. Here are the top ones, ranked by their Reddit score.

Screws on to most any folderHardened 416 StainlessBlack Oxide CoatingHardened set screw.40" long x .28" dia x .130" blade slotIncludes 1/16" Hex Key Wrench

Check price on Amazon

15 Reddit comments about Kwik Thumb Stud - Stainless:

u/299152595 · 13 pointsr/BuyItForLife

> Buck 110

I love the Buck 110 as well. The biggest knock against it is it doesn't come with a thumb tab for one handed opening. However, for around $10 you can get this and you're still under $45 for the knife. I have it on my Buck and after 2 years I've had no problems with it.

I also really like the steel they use for it as it's quick to sharpen but still keeps an edge for a reasonable amount of time for most day to day uses. I have an older Buck 105 with the tougher 440C steel and it takes significantly longer to sharpen it.

Edit: Here's the brass Kwik thumb stud. It's the one I have and it goes well with the brass Buck 110.

u/FullFrontalNoodly · 10 pointsr/BudgetBlades

The UKPK really does hit all your points. I certainly understand your concern about the aesthetics, though -- I disregarded Spyderco for years for that reason. Get one in your pocket for a couple of days and chances are you'll do a complete 180.

Alternatively, you can make any knife a one hand opener with one of these:

https://www.amazon.com/Kwik-Thumb-KTS01756-Stud-Stainless/dp/B006OCP46S

u/Erhon5 · 4 pointsr/knives

There is a thing called a Kwik Thumbstud or the Kwik Bar on Amazon you attach it to the spine then you can open it one handed.

u/pyrobunny · 4 pointsr/knifeclub

Maybe give one of these a go? I plan on doing it!

u/Yondrng · 3 pointsr/knifeclub

Spyderco Smock. Cold Steel AD15. Buck Marksman. Spyderco Sliverax. For $10 more- Benchmade 940.
I’ve also found that if you add a thumb stud to some knives, you really increase the fidget factor. Kwik Thumb Stud - Stainless https://www.amazon.com/dp/B006OCP46S/ref=cm_sw_r_cp_apip_fRBeMuYv9nzna

u/ShaneInDenver · 3 pointsr/Opinel

You could get a screw on thumb stud

https://www.amazon.com/Kwik-Thumb-SS-BRK-KTS01756-Stud-Stainless/dp/B006OCP46S

u/wickedsteve · 2 pointsr/EDC

The thumb stud is an add on I got at amazon.

Link: http://amzn.com/B006OCP46S

u/ipoutside365 · 2 pointsr/knifeclub

This is my Proper. I work a lot in New York City so I needed something friendly. I found I like it with an added Kwik thumb stud and a Tec P-7 suspension clip.

u/DisparateDan · 2 pointsr/knifeclub

I agree, and it's surprisingly usable for all its minimalism. I ordered one of these for one-handed-opening assist, but I don't know it if will ruin the minimalism (hasn't arrived yet).

u/aLn1230 · 2 pointsr/knifeclub

you could get this http://www.amazon.com/Kwik-Thumb-Stud-4in-STAINLESS/dp/B006OCP46S/ref=pd_sim_sg_1?ie=UTF8&amp;refRID=08HAS1D525NJW2JB41XK

or contact kershaw about it

u/ihuntkirby · 2 pointsr/knifeclub

Have you considered something like this?
https://www.amazon.com/Kwik-Thumb-Stud-4in-STAINLESS/dp/B006OCP46S

u/WillAdams · 2 pointsr/victorinox

Bought one:

https://www.amazon.com/Kwik-Thumb-Stud-4in-STAINLESS/dp/B006OCP46S

considered making one, and may yet try that.

u/Evilwrestler · 1 pointr/EDC

https://www.amazon.com/Kwik-Thumb-Stud-4in-STAINLESS/dp/B006OCP46S

it absolutley does work very well for one handed opening

u/Dtownsend104 · 1 pointr/knives

I don't know about that. I've never owned either knife. I just figured a thumb stud would help.

Here, they come in satin, black, and brass
https://www.amazon.com/Kwik-Thumb-SS-BRK-KTS01756-Stud-Stainless/dp/B006OCP46S

u/c4zzz13r · 1 pointr/Knife_Swap

Sorry no more pics I already shipped it. I was able to find it though...

https://www.amazon.com/Kwik-Thumb-SS-BRK-KTS01756-Stud-Stainless/dp/B006OCP46S

The one I had was all black. You just tighten it down with the provided Hex key. Lots of pics in the reviews