Reddit Reddit reviews LE 12V LED Strip Light, Flexible, Waterproof, SMD 2835, 16.4ft Tape Light for Christmas, Home, Kitchen and More, Daylight White(Power Adapter not Include)

We found 17 Reddit comments about LE 12V LED Strip Light, Flexible, Waterproof, SMD 2835, 16.4ft Tape Light for Christmas, Home, Kitchen and More, Daylight White(Power Adapter not Include). Here are the top ones, ranked by their Reddit score.

Home & Kitchen
Seasonal Lighting
Seasonal D‚cor
Rope Lights
LE 12V LED Strip Light, Flexible, Waterproof, SMD 2835, 16.4ft Tape Light for Christmas, Home, Kitchen and More, Daylight White(Power Adapter not Include)
Note:A power adapter NOT INCLUDED.The working voltage is 12V DC. Please do not use power adapter that is higher than 12V to supply.Waterproof. IP65 rating means the 12V LED strip lights are dust tight and protected against water projected from a nozzle, ideal for both interior and exterior decoration, including dining rooms, bed rooms, kitchens, stairways, porches, desks, gardens, patios and living rooms all holidaysAuthentic 3M tape. Super Sticky and stable. Flexible LED 3M tape comes with a peel-and-stick adhesive backing, you can quickly and easily apply this 12V strip to most smooth dry and clean surface. This Slim, compact and flexible PCB strip can be mount end-to-end for bendable or angled patterns, or in continuous rows.Cuttable and Linkable. This ribbon is easy to cut along the scissor marks (3-LEDs per mark), and compatible with connectors(include), you can customized lighting and length for your DIY project.Bright and Safe to Use. With 300 units of 2835 SMD LEDs, this bright striplight is 240 lumen daylight white, 12V DC working voltage is low heat, making it is touchable, secure and reliable to people, especially to children. The wattage is 18W, Please be kindly informed that the total wattage of LED strip lights should not exceed the max wattage of power adaptor.
Check price on Amazon

17 Reddit comments about LE 12V LED Strip Light, Flexible, Waterproof, SMD 2835, 16.4ft Tape Light for Christmas, Home, Kitchen and More, Daylight White(Power Adapter not Include):

u/phxees · 5 pointsr/teslamotors

I like it, but would you think going with this strip:
https://www.amazon.com/dp/B00HSF66JO/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Similar to your suggestion, but waterproof.

Not sure if that’s your referral code, but I tried to copy it over just in case.

u/OSUaeronerd · 4 pointsr/MarbleMachineX

https://www.amazon.com/Waterproof-Flexible-Daylight-Gardens-Kitchen/dp/B00HSF66JO/ref=sr_1_2_sspa?ie=UTF8&qid=1519883907&sr=8-2-spons&keywords=12v+led+light+strip&psc=1

those are self adhesive even. Just used some on my 3d printer. they even have color changing versions, and some can react to sound....

Honestly seems like something out of a different aesthetic though... a bit too techno on a machine making the most of mechanics.

u/Shadyrabbit · 3 pointsr/minipainting

I dont think it would be that hard, and its a really neat idea. Found these on amazon and the frame could be made out sheet plastic or pvc.

u/JON-JON-METAL · 3 pointsr/AnycubicPhoton

Sorry the pictures were supposed to have descriptions with them, it was my first photo post and I got it slightly wrong.

The panels are all replaced with VE Grade 3mm acrylic, optically looks clear but is virtually opaque in UV, Perspex amongst others make it, a full size sheet 2x1mtr is expensive so I would google for somewhere that will cut to size and sell you an off cut large enough to be cut into all 4 panels, (if you want to replace all 4). I used the oem panels as templates, the acrylic drill fine with a wood backing and I used a dremel like tool with a cutting wheel to cut out the panels, I would recommend protection as bits of hot acrylic tend to spin off the blade.

The lights are a couple of pieces of this, https://www.amazon.co.uk/gp/product/B00HSF66JO, they can be cut every 3 LEDs and wires soldered to the ends. To fit them they have adhesive tape and are taped in the near corners. The proper way to route them would be to strip the printer down and file a slot in the base at the 2 corners, or drill holes big enough in the base to thread the cables through, or the naughty way, remove the screws in the corners, make sure the the sides are not glued with resin or anything. refit the screws and lever a small screwdriver down the side to make a slight gap, enough to route the cables down. Remove the base and fit a suitable switch, I used https://uk.rs-online.com/web/p/push-button-switches/7346750, discrete and latches. Solder and heatshrink the wiring together and connect to the main connector on the motherboard.

If anyone is interested I can put the stl of the tool holder on thingiverse.

u/kehillah · 2 pointsr/MakeupAddiction

So basically I used a 16" wire wreath frame and wrapped tin foil around it to reflect the light better, and stuck on the LED Lights! They don't come with a power adapter so I bought this one.

u/thisismytreesact · 2 pointsr/Autoflowers

This is similar to what I have. There is a link on that page for the power supply also.

https://www.amazon.com/Flexible-Waterproof-Christmas-Kitchen-Daylight/dp/B00HSF66JO

You can cut it to the length you need.

u/astral-blood · 2 pointsr/shroomers

If you have that kind of space I would get a greenhouse tent /kit
like this

along with a humidifier, humidity controller, a couple small fans, a few rolls of led strip lights and a timer. You can put together one of these automated setups for pretty damn cheap (less than $200?) and you will never have to mist and fan again, and will allow you to go out of town etc and not worry about the constant misting and fanning. Additionally you can grow some culinary mushrooms (lions mane and to a less extent king oyster does well with cubensis), which if youre interested in doing this long term or bulk really helps cover your ass.

As mentioned below you should transition to bulk after this grow. Look into making liquid culture from fruits you grow this round which can be used to quickly make grain spawn and thus bulk tek grows.

u/Rifful · 1 pointr/AnimeFigures

Sorry, was asleeping. LED strip here

Power supply: here

u/WeedFrontier · 1 pointr/microgrowery

I hope your experiment in simple living is rewarding. I've gained a lot from the short amount of time I've spent away from civilization. Being secluded from humans and immersed in nature is gives you a different perspective on life to say the least.

LED's will probably be the best option because they run on DC, and besides that they are by far the most energy efficient form of lighting. If you buy LED's get a light that runs on 12v and isn't wired with a switching adapter to run on 110v AC - if it's wired with a standard 2 or 3 prong wall plug you know this is the case. This is important in your situation because the process of converting power from one phase to another wastes power in the form of heat - the process isn't efficient. Using an LED wired for 110v would be bad because you'd be switching the power, with efficiency losses, twice. If you can get a setup that's all DC you'll use your electricity in the best way. A 24v DC to 12v step down converter will consume much less power than an inverter will.

There are a lot of options as far as strip lighting goes. This strip uses smaller LEDs and draws 25w, but has the same amount of LED chips and is the same length. Less wattage spread over the same area.

u/sudomv · 1 pointr/motorcycles

They sale just white if that's all you want. I did my own - watched a few youtube videos and bought some of the raw materials myself and saved some money, learned a few things, and made the bike's lights the way I wanted.
led $8

remote module $ 19

power distribution module $12


Other than that, a little bit of 2-channel wire and electrical tape (or I used heat shrink), and if you wanna go the distance and solder (which I did that too) will get you where you want to be. My problem with those kits were you get a few feet of led strips for ~$40. The raw spool I bought gave me 16+ feet. I was able to use the excess for the cabs in my garage. Anyway, I hope this helps. Nice ride by the way!!

Cheers!