Reddit reviews LED Flasher Relay 7 Pin For Suzuki GSXR SV DL Lamp Turn Signal Flash Controller

From my Google doc:

• gsxr front end
  
• protek ll-45 lowering links (at stock height, from previous owner)
  
• delkevic 320mm ss tri-oval slip-on exhaust (w/o baffle)
  
• vortex v3 keyless gas cap
  
• oem sv tank pad (990D0-16G00-PAD)
  
• generic mirror plug blanks
  
• mzs black shorty levers
  
• yamaha r6 throttle sleeve
  
• speed bleeders f/r
  
• targa fender eliminator
  
• targa mini oval turn signals
  
• sbl ba9s led turn signal bulbs
  
• generic led flasher relay
  
• sbl lsc-100a brake light strobe module
  
• opt7 fluxbeam cree h4 led headlight
  
• vortex steel 520 sprockets 15f/47r (15/45 stock)
  
• rk racing gb520xso chain
  
• svracing captured rear wheel spacer kit
  
• smartmoto dealer mode tool
  
• tps adjustment (set to ~1600 rpm)
  
• sv1000 air snorkel (13891-16G20)

I'd check your turn signal relay, or just replace it since they're cheap. It may have blown with it. Here's the one I bought to work with my LED signals, but it should work for regular bulbs as well if you're not running LED's.


https://smile.amazon.com/gp/product/B003UN4FXW/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1

​

It is under the pillion seat, as described in this forum post. You won't need to do all the stuff he does, just pull out the old one and plug in the new one.


https://www.svrider.com/forum/showthread.php?t=163261

I see you have an SV. Just buy this relay: https://www.amazon.com/gp/product/B003UN4FXW/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

Its plug-n-play to the existing relay located under the seat.

That way, you won't have to worry about resistors. I have all LEDs and the relay and the flash rate is normal.

The relay behind the headlight shroud? Is that what you are asking?


https://www.google.com/url?sa=t&source=web&rct=j&url=https://www.amazon.com/Lighting-Controller-Suzuki-Signal-Bandit/dp/B003UN4FXW&ved=2ahUKEwju5cjp5KnjAhUQOs0KHZQ2CEgQFjAAegQIAhAB&usg=AOvVaw0YruURk2ofwFiYCjsK3RCm

Nice, thanks for the update.

Did you install a relay? That may be what's causing the weird flashing. Without the relay for me was a solid light but I read somewhere that may have to do with the grounding but I'm not sure.

Just in case, here's a couple links: DIY on SVRiders.com and Plug and Play on Amazon.com. I used the Amazon one.

It appears it does not,

Here's a link to the exact one https://www.amazon.com/gp/aw/d/B003UN4FXW/ref=ya_aw_od_pi?ie=UTF8&psc=1

Don't do resistors, get a blinker relay.

http://www.amazon.com/gp/aw/d/B003UN4FXW?pc_redir=1414050018&robot_redir=1

Something like this, but there may be a cheaper one out there.

A bad resistor job can melt stuff and $15 is essentially nothing compared to the headache of wiring in all that extra stuff.

I'm in Mexico, but this info LED bulbs model would be help anyway.


I replaced incandescent stock bulb indicators with that:
https://articulo.mercadolibre.com.mx/MLM-600774743-par-de-led-cree-1156-7506-direccional-cuartos-reversa-1000lm-_JM
It has a great lumen power more than stocks.
You must replace Flasher relay with this model, because LEDs bulbs blinks more faster with stock relay.
https://www.amazon.com/gp/product/B003UN4FXW/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1


For tail stop brake bulb I replace it with that:
https://articulo.mercadolibre.com.mx/MLM-598842987-foco-de-stop-led-1157-para-motocicletas-1000-lumens-potentes-_JM
It has a great power and minor consume.


All bulbs sizes are compatible with stock ones.
Hope it help to you.

​

For generic signals you will need an adapter plate (for the front). They are like $5.

e.g.: http://www.amazon.com/Adapters-Signals-Suzuki-SV1000-Bandit/dp/B001MZVWKY/ref=sr_1_2?ie=UTF8&qid=1393862757&sr=8-2&keywords=sv650+turn+signal+adapter

You may want to find some wire adapters, so you don't have to do any cutting or w/e. I cut mine but afterwards realized that was annoying because I prefer not to modify a vehicle's stock harness if possible.

http://www.amazon.com/Adapters-Signal-Suzuki-TL1000S-TL1000R/dp/B003UNAZX6/ref=sr_1_1?ie=UTF8&qid=1393862757&sr=8-1&keywords=sv650+turn+signal+adapter

Next: If you are using LED signals, you will need a flash fixer because otherwise they'll flash really fast. Most states it is 1 flash per second by law, see:

http://www.amazon.com/Signal-Flasher-2000-2010-TL1000R-Hayabusa/dp/B003UN4FXW/ref=sr_1_1?ie=UTF8&qid=1393862864&sr=8-1&keywords=sv650+turn+signal+flasher

Lastly, your lights:

http://www.amazon.com/Motorcycle-Indicators-Blinkers-Cruisers-Davidsons/dp/B003LTEC0G/ref=sr_1_1?ie=UTF8&qid=1393862886&sr=8-1&keywords=motorcycle+led+turn+signals (OR basically any aftermarket generic signals. Mine look similar to that in the front.)