Reddit reviews Leviton 61 660 Watt, 125 Volt, Polarized Outlet-to-Lampholder Adapter, Brown
We found 12 Reddit comments about Leviton 61 660 Watt, 125 Volt, Polarized Outlet-to-Lampholder Adapter, Brown. Here are the top ones, ranked by their Reddit score.
Medium base Outlet-to-Lampholder.660 Watt Socket125 VoltsPolarized plugColor: brown
Right? It is a hell of a lot nicer to wake up to light than sound, though. I made one of these and the brightness from the light almost always wakes me up before my alarm goes off.
If you want to make your own, CFL bulbs with Amalgam are perfect as they gradually heat up over a few minutes from about 50% brightness to 100%.
Light: http://www.amazon.com/Satco-Compact-Fluorescent-Reflector-Replacement/dp/B008SCEQXY/
Timer: http://www.amazon.com/dp/B00FSQTQQA/
Fixture: http://www.amazon.com/Leviton-61-Polarized-Outlet---Lampholder/dp/B001OM1L06/
I'd recommend buying an extension cord and something to secure the fixture to your ceiling or wall.
Just buy one of these or these for a few bucks. You're better off not having the exposed wiring. Solder connections can be brittle and break if you stress them too much. Also you never know if you're going to have to replace the bulb.
Buy a couple packs of CFLs at Walmart. It's like $10 for a pack of 4. They're around 25 actual watts, so that's another 100W for $10. Buy 2 packs, get some of these splitters and these plug adapters (they're like $1 at hardware stores). Plug them into a power strip. You'll really see an increase in bud at the end.
Is this what you want?
Try this
Outlet to Lamp adapter
Here's the basic parts list to build a bucket like this:
Lots of this stuff can be had cheaper at a home improvement or pet store. Check around. You'll need a soldering iron (I like my adjustable 40w), a drill and drill bits up to 3/4" (I like step bits for work on plastic), a heatgun or lighter to shrink that heatshrink tubing. An infrared thermometer is nice to have and can tell you the temp of your nutrients, the plant itself, your lights, etc...Just make sure to calibrate it first, all the cheap ones are inaccurate by at least a few degrees.
work around.
Buy a light socket that has 2 receptacles on each side : Here
Then 2 of these Socket to bulb adapters Here
that should do it.
You bet!
https://www.amazon.com/Leviton-61-Polarized-Outlet-Lampholder/dp/B001OM1L06?ref_=fsclp_pl_dp_12
Even cheaper - $1.99 haha. They have them at all hardware stores too.
Light socket. Same as what we use in the US (not sure where you are at) for a light socket, or for a lamp.
You can get one of these, if you want more mobility and plug it into an outlet - http://www.amazon.com/Leviton-61-Polarized-Outlet---Lampholder/dp/B001OM1L06/ref=sr_1_4?ie=UTF8&qid=1416090703&sr=8-4&keywords=light+socket+to+plug+adapter
Leviton 61 660 Watt, 125 Volt, Polarized Outlet-to-Lampholder Adapter, Brown https://www.amazon.com/dp/B001OM1L06/ref=cm_sw_r_cp_api_8t2DAbTB3EGT8
Plug a few of these into a power strip.
You want to get to minimum 50w per square foot HID/LED (100w sq/ft for CFL) so you need to make up another 85 watts or 170 watts of CFL. A 6 pack of 100w equivalent should do the job.
Grab a couple surge strips and 6 of these for a cheapish way to power the bulbs.
You could also get yourself a 150w HID and be good to go for a larger plant next go around.
I'm surprised no one told you about these. That + some sticky wall hooks to hold them. They're relatively cheap (cheaper at your local hardware store than amazon) and seem to be just what you're talking about.
Another popular one is to get a power strip mounted inside the box and then get some of these to hold the lights.
Unless you're talking about not wanting the plug even to leave the box? I can't imagine a scenario in which you don't have to have a hole for some wires to get in...
Maybe this kind of vagueness is why you didn't get much of a response to start with lol.