Reddit Reddit reviews Leviton T5632-W USB Charger/Tamper-Resistant Duplex Receptacle, 15-Amp, White,1-Pack

We found 21 Reddit comments about Leviton T5632-W USB Charger/Tamper-Resistant Duplex Receptacle, 15-Amp, White,1-Pack. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Electrical Equipment
Electric Outlets & Accessories
Standard Electrical Outlets
Leviton T5632-W USB Charger/Tamper-Resistant Duplex Receptacle, 15-Amp, White,1-Pack
SMART - Built-in smart chip recognizes the individual device’s charging requirement to optimize the chargePOWERFUL – Two high-powered charging ports with 3.6A of charging powerCONVENIENT – No more searching for charging adapters! Upgrade your existing outlets so you can charge up to two USB powered electronics at once, leaving the outlets free for additional power needsENHANCED SAFETY – Built in overcurrent protection helps protect the electronic from receiving too much power which can damage the deviceEASY - Compact design fits in a standard wallbox and works with Decora and Decora Plus screwless wallplates, back and side wired for easy installationHighest power device on the marketWallplate sold separately
Check price on Amazon

21 Reddit comments about Leviton T5632-W USB Charger/Tamper-Resistant Duplex Receptacle, 15-Amp, White,1-Pack:

u/Ms_KnowItSome · 28 pointsr/electricians

One of the Leviton versions of this is $22.

https://www.amazon.com/dp/B00J3PMU4C

You're buying 4 of the same type thing for less than the price of two Levitons.

Buy a real product from a real company that actually has assets to protect from liability claims arising from burning down houses from cheaply made garbage which incents them to make something that won't actually burn your house down.

u/SemiNormal · 20 pointsr/CrappyDesign

You need to find one that supports 3 amp charging. I have one of these and it works great. Something like the TOPGREENER brand outlets might be better if you are charging tablets.

u/s__n · 15 pointsr/funny

If it's one of these then the black one is in a proper outlet too. The smh is that she used two USB power bricks instead of the USB ports, defeating the purpose of the new outlet.

The USB ports are too far apart I think to fit a pronged plug into them.

u/Guerilla_Imp · 8 pointsr/DIY

Very nice, could've gone with these outlets tho for more USBness: http://www.amazon.com/Leviton-T5632-W-Charger-Resistant-Receptacle/dp/B00J3PMU4C

u/nexusheli · 8 pointsr/HomeImprovement

The leviton outlets are only $19 stateside, we don't need electricians to replace existing outlets (though some people are more comfortable having a professional do it).

That said, the newer 'C' specification tends to be inherently more expensive, so I don't foresee outlets with full 'C' power delivery being that inexpensive.

u/koukimonster91 · 7 pointsr/DIY

nice build, one thing though, get rid of that chinese receptical, its a fire hazard, they werent even bothered to clean up the edges around the "TR" letters in the mold, who knows how there quality control is of the actual electronics. get a Leviton one instead, they come in every colour

u/TheVermonster · 5 pointsr/electrical

I would put a GFCI in the wall where you plan to plug this in. Then, get a standard sized outlet, but one that has the two USB ports and is Tamper resistant. Like https://www.amazon.com/dp/B00J3PMU4C/ref=cm_sw_r_cp_apa_ZhD5Bb0TBC6NZ

Or you could go for the straight 4x USB. The call is up to you. Having a standard receptical means you can upgrade or switch as your needs change.

Edit, forgot the box. Get a metal, gangable box for use with NM/Romex. You can also get a metal, old work for use with NM/Romex and just take off (or even use) the old work clamps. Sorry I can't link it now. But you'll see why it will work. Just wrap the ground from your extension around the wire, then go to the receptical.

u/Astramancer_ · 4 pointsr/DIY

It would probably be a lot more generally useful and future proofed to just get regular AC voltage outlets with built in transformers and USB outlets.

https://www.amazon.com/Leviton-T5632-W-Charger-Resistant-Receptacle/dp/B00J3PMU4C/

That way as standards change (USB-A won't be around forever and USB-C can already handle significantly more watts than A was originally specified for) re-doing your charging infrastructure is as simple as changing out an outlet instead of having to mess with pintouts and potentially re-running wire.

u/fossilnews · 3 pointsr/DIY

Just check the specs. But since they are drawing from the wall you can get some solid juice. They usually tell you which standards they are compatible with. For example at the bottom of https://www.amazon.com/gp/product/B00J3PMU4C/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 it has a comparison chart.

u/stupac62 · 2 pointsr/homeautomation

I don’t know of one.
But just wanted to make sure you were aware of the outlets that has USB integrated. just one example

u/ncsufire · 1 pointr/electricians

I actually put this one in https://www.amazon.com/gp/product/B00J3PMU4C/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1. It does not have a breakable tab though but thought I would show you one with a lower price.

u/tacotroll · 1 pointr/electrical

There should be no issues. I was just looking into this myself and I found these guys at Amazon for a pretty good price:

https://www.amazon.com/gp/product/B00J3PMU4C/ref=ox_sc_act_title_2?smid=ATVPDKIKX0DER&psc=1

u/Syde80 · 1 pointr/homeautomation

Sure, I'd get this receptacle instead http://www.amazon.com/Leviton-T5632-W-Charger-Resistant-Receptacle/dp/B00J3PMU4C

:p

Normally a fan of Cooper, but like this receptacle for USB. You can actually fit something in all sockets on it at the same time as long as you are not using a bulky ac adapter.

u/Shatteredreality · 1 pointr/DIY

Sorry for not being clear on this.

It's currently a single unit with two outlets in it (like this).

One of the two outlets is "always on", the other is controlled by a switch (so you can plug in a lamp or other light source that is then controlled via switch at the door vs on the light).

I was hoping to swap the existing unit for one that included USB ports. I wanted to maintain the 1 outlet always hot, 1 controlled by switch configuration I already had.

According to /u/trekkerscout they do not make a receptacle unit that will allow that so I'll have to choose to have the whole thing be on the switch or the whole thing always on.

As far as the safety warning, thanks for the reminder. I always kill the power at the circuit breaker (and I make sure I do it myself, I know a few guys who have had issues because their buddy/dad/colleague killed the wrong breaker so I take extra care to make sure it's right) but it's a good warning anytime you deal with exposed wiring.

u/tastyratz · 1 pointr/homeautomation

Blocking the socket is fine if you have it suspended above by magnets. Technically it's not even a permanent installation that way.

Yes you would need to install a new box, but you would need to anyways if you were looking to put the tablet at the right height with hidden power. And the box I linked is good for new work or old work so you could easily retrofit it into an existing wall. If you have a place to rats nest a transformer then you have a place for this.

Even better than a transformer is something like this:

https://www.amazon.com/Leviton-T5632-W-Charger-Resistant-Receptacle/dp/B00J3PMU4C

Then just lay a thin QI mat on top