Reddit Reddit reviews Lisle 37000 Air Conditioning/Fuel Line Disconnect Tool Set

We found 7 Reddit comments about Lisle 37000 Air Conditioning/Fuel Line Disconnect Tool Set. Here are the top ones, ranked by their Reddit score.

Automotive
Automotive Tools & Equipment
Fuel System Tools
Fuel Line Disconnect Tools
Lisle 37000 Air Conditioning/Fuel Line Disconnect Tool Set
Easily Disconnects Air Conditioning Lines and Quick Connect Fuel Lines. Set of six tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning line. Also works on fuel line quick connect couplings found on GM, Ford, and Chrysler. The 5/16" size fits on push lock connectors found on Ford radiators and transmission lines. Easy to use in confined spaces. Set includes six sizes: 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8".Set of six tools which disconnect the spring lock couplings on Ford and Chrysler air conditioning line.Also works on fuel line quick connect couplings found on GM, Ford, and Chrysler.The 5/16" size fits on push lock connectors found on Ford radiators and transmission lines.Easy to use in confined spaces.Set includes six sizes: 5/16", 3/8", 1/2", 5/8", 3/4" and 7/8".
Check price on Amazon

7 Reddit comments about Lisle 37000 Air Conditioning/Fuel Line Disconnect Tool Set:

u/RibbedFYP · 3 pointsr/MechanicAdvice

https://www.amazon.com/Lisle-37000-Conditioning-Fuel-Disconnect/dp/B0002SRCK6/ref=sr_1_6?ie=UTF8&qid=1536435745&sr=8-6&keywords=fuel+line+tool&dpID=31XB0Q9pRWL&preST=_SX300_QL70_&dpSrc=srch

And safety glasses. Make sure you relive fuel pressure first.

u/TrouserPudding · 2 pointsr/Cartalk

"One of the two by the engine isn't really specific enough". What are you looking at? Do you have a picture?

Chances are high that the answer to you question is to buy this: http://www.amazon.com/Lisle-37000-Conditioning-Fuel-Disconnect/dp/B0002SRCK6

But I can't be sure without more info.

u/annoymaniac · 2 pointsr/Mustang

You can change the fuel filter extremely easy. If you are skinny and the car isn't dropped, you can change it without jacking the car up. You will need these:

http://www.amazon.com/Lisle-37000-Conditioning-Fuel-Disconnect/dp/B0002SRCK6/ref=sr_1_3?ie=UTF8&qid=1413940398&sr=8-3&keywords=fuel+disconnect+tool

and of course a new filter, which is cheap.

u/skookum1 · 2 pointsr/Cartalk

If it's been an Oregon vehicle all its life there won't be any rust, we don't salt the roads here. One thing that will be needed to replace the fuel filter is a disconnect tool like this: http://www.amazon.com/Lisle-37000-Conditioning-Fuel-Disconnect/dp/B0002SRCK6

For the handtools I would go to sears and buy a craftsman set instead. You can walk in with broken tools without a receipt and get replacements for free no questions asked. I haven't used duralast but I imagine craftsman to be better quality

Doing the plugs and wires, only do one at a time so there is no way to get the firing order mixed up. Same thing with the brakes, this way if you get mixed up you can refer to the other wheel.

Sorry if you already mentioned this but:

GET A MANUAL FOR TORQUE VALUES AND RENT A TORQUE WRENCH

u/BigShowSJG · 1 pointr/autorepair

That ford uses plastic lines. Go to a part store (a rear one. Not autozone) and get a cheap fuel line to get the clip. Remove fuse for fuel pump, then start the car and let it die. Turn off key. Your system is now de pressurized. Put the fuse back when the job is complete.

This is the special disconnect tool.
https://www.amazon.com/gp/aw/d/B0002SRCK6/ref=psdcmw_15707681_t3_B000W1R1J0

u/sheepjeepxj · 1 pointr/Jeep
  1. release the fuel line pressure by putting some rags under the fuel rail and pressing on the schrader valve on the fuel rail, there might me a retaining clip holding the two pop it off with a screwdriver

  2. use a ac / fuel line disconnect tool and pop off the fuel line from the fuel rail

  3. undo the nuts holding the fuel rail down

  4. remove the injector wires from the injectors (mark them so you put them back in the right order and remove any clips holding the injector to the rail

  5. pull up evenly and wiggle on the fuel rail, some injectors will come out with the rail some will stay with the manifold

  6. wiggle out the injectors from the manifold or fuel rail and fish for any o rings that didn't come off with the injectors.
u/Civicricer · 1 pointr/MechanicAdvice

Does it need to be those angled ones?

https://www.amazon.com/Lisle-37000-Conditioning-Fuel-Disconnect/dp/B0002SRCK6?ref_=fsclp_pl_dp_2

There’s also these