Reddit Reddit reviews Lucky Line 87202 Skeleton Key, 2 Pack, Combo - 2 PK

We found 8 Reddit comments about Lucky Line 87202 Skeleton Key, 2 Pack, Combo - 2 PK. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Hardware
Door Hardware & Locks
Door Lock Replacement Parts
Lucky Line 87202 Skeleton Key, 2 Pack, Combo - 2 PK
🗝 BEST USE - on antique french doors or other antique door hardware.🗝 FLAT TIP & NOTCH TIP INCLUDED - FLAT TIP is Intended for a warded lock—With a warded lock, a skeleton key lacks interior notches to interfere with or correspond with the wards, or obstructions, thereby allowing it to open the lock. NOTCH TIP -Intended for a lever lock—that is, a lock with a set of levers and wards—the skeleton key can push the levers to the correct height while bypassing the wards. In this type of system, each lock will still have its own key that corresponds with the wards; the skeleton key, or master key, can open any of the locks within that system.🗝 MATERIAL - made with brass plated zinc that will not bend under continuous use.🗝 LARGE HEAD - makes turning easy.🗝 GENERIC CUTS - made to fit most antique door locks. Measures 3-1/4" in length.
Check price on Amazon

8 Reddit comments about Lucky Line 87202 Skeleton Key, 2 Pack, Combo - 2 PK:

u/dmscheidt · 3 pointsr/HomeImprovement

Finding a kit of skeleton keys and seeing if any works is a good easy first step. One of these two keys works on about half old interior moritse locks:
https://www.amazon.com/Lucky-Line-87202-Skeleton-Keys/dp/B000LNQO8I

u/jondoelocksmith · 2 pointsr/lockpicking

https://www.amazon.com/Lucky-Line-87202-Skeleton-Keys/dp/B000LNQO8I these ones should do the trick. Worst case, a bit of filing where the key rubs.

u/Iboughtat2i · 2 pointsr/Locksmith
u/Fenwick23 · 2 pointsr/lockpicking

Yeah, those picks he linked to are for padlocks. I have a set in my pick kit.

99.9% chance you can use a key from the classic Lucky Line skeleton key set and it'll work.

u/Shear_line · 2 pointsr/Locksmith

As I'm sure you guessed, this lock is quite old. I believe it would be considered a rim lock as it mounts to the face of the door rather than being bored into the edge of the door. You may be able to find some markings on it but even then it might not be too helpful, the company could be out of business for a long long time by now. Even if they're still around its doubtful they would be any help as Im sure they stopped supporting this hardware long ago.

The good news is that since its for an interior door there is a pretty good chance it uses one of a couple of keys which are easily and cheaply available. I would try these, its worth the gamble of a few bucks. If they work one lock in your house they probably work all the others too (assuming the other locks are in working order of course). http://www.amazon.com/Lucky-Line-87202-Skeleton-Keys/dp/B000LNQO8I

You are correct about the spring, it appears to me to be missing. The spring sits in the slot you were describing. That piece is the lever (you have a lever tumbler lock) and the spring is anchored in that slot, wraps around the rounded part and is held in place by the inside of the case. Something like this.

https://imgur.com/23p1wYg

A local locksmith should be able to make you a spring like this pretty cheaply, assuming they work on old stuff, a lot don't these days. I would call up a shop and tell them you have an antique lock that uses a bit key that you need a spring made for and see what they say. You can probably pick up the keys for them as well.

u/chrisgee · 1 pointr/pics

they still make skeleton keys just like this, but with less rust.

u/codewolf · -1 pointsr/Locksmith

Almost all of these keys are the same. You just need a skeleton key. These can be found very cheaply. Don't call a locksmith and waste your money.