Reddit reviews Mahipey for Phone Adapter Audio & Charger & Call & sync Cable Dongle Headphone Adapter

Assuming you are talking about R-Pi, v3b.

All 32 bit and lower works flawlessly. This includes but is not limited to Genisis, GB, GBC, GBA, NES, SNES, PSX.

N64 is the most commonly discussed as it has a large library of great games that are also often 4x multiplayer. Most games work very well (e.g. Mario Kart), while some do not (in particular 007 Goldeneye).

Hardware:

• Raspberry Pi 3 - $36
  
• Samsung EVO 32GB Class 10 Micro SDHC - $11
  
• CanaKit 5V 2.5A Raspberry Pi 3 Power Supply - $10
  
• Addicore Raspberry Pi Heatsink Set - $5
  
• AmazonBasics High-Speed HDMI Cable - 3 Feet - $5
  
• Official Raspberry Pi 3 Case - $8
  
  
  Total cost so far, $75. You can get a less expensive case that also comes with the heat sinks bringing your cost down to ~$65.
  
  Cheap right? Well, the one thing that is going to cost you the most in any of these builds is the controllers.
  
  I like:
  
  
• 8BITDO NES30 Pro Wireless Bluetooth Controller - $49 (x4).
  
  When I first bought them, they were $36 each, and I love them. They work really well via the Pi's built in Bluetooth.
  
  Another great option that works really well are the XBOX-360 controllers. Wired ones run you $27 each brand new, and wireless are $34/each, plus one adapter for the set.
  
  
  In other words, four good controllers are going to run you $100-$200. Which is the bulk of most builds. In a childs-only build, I am considering either wired XBOX-360 controllers because of their awesome cord break-away feature, or going even less expensive with the $12 SNES clones, though that eliminates the ability to play N64 and PSX.

Obviously you can use whatever, but these are what I used for this project. I bought the 2 pin power ports off of Ebay. For the NES case, try searching "Broken NES" on ebay and you should be able to find some. Or use an entirely different shell and post it!

• Bluetooth Dongle http://www.newegg.com/Product/Product.aspx?Item=N82E16833340012
  
  
• Raspberry Pi Heatsinks http://www.amazon.com/gp/product/B00HPQGTI4/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
  
  
• Wifi Dongle http://www.amazon.com/Edimax-EW-7811Un-Adapter-Raspberry-Supports/dp/B003MTTJOY/ref=sr_1_2?ie=UTF8&qid=1415036150
  
  
• 8in HDMI Male to Female http://www.monoprice.com/Product?c_id=104&cp_id=10419&cs_id=1041913&p_id=2891&seq=1&format=2
  
  
• 1.5ft USB Male to Female http://www.monoprice.com/Product?c_id=103&cp_id=10303&cs_id=1030304&p_id=5431&seq=1&format=2
  
  
• Shutdown switch https://mausberry-circuits.myshopify.com/products/shutdown-circuit-use-your-own-switch
  
  
• 2 Pin IEC 320 C8 Screw Mount Inlet Plug Socket AC 250V 2.5A
  
  **edit updated bluetooth link

http://www.amazon.com/gp/aw/d/B00HPQGTI4/ref=pd_aw_sim_147_of_11?ie=UTF8&dpID=41aRopZXEAL&dpSrc=sims&preST=_SL500_SR100%2C100_&refRID=1E54R6967B6SYY1BRC95

You are really overestimating prices for most of that.

• 32GB Micro SD - $10,
  
  
• Heatsink Kit - $5,
  
  
• Case - $6,
  
  
• Power Supply - $7
  
  
• Controllers - $17 for both
  
  The controllers even appear to be the same ones from the photo in the OP.
  All from Amazon and qualify for Prime. Just saved you $55.
  
  

Aside from the cooling fan in the back of the case, I also added some little heatsinks to the Pi to keep it cool, I think its fine to keep on, it doesn't get too hot.

http://www.amazon.com/Addicore-Raspberry-Heatsink-Aluminum-Sinks/dp/B00HPQGTI4/ref=sr_1_1?ie=UTF8&qid=1450135161&sr=8-1&keywords=pi+heatsinks

• Case
  
  
• Heatsinks

My Pi 3 is on the way, and I read a thing yesterday about the high temps, so I ordered a few aluminum heatsinks. Is the heat really anything that these heatsinks won't be able to take care of?

http://www.amazon.com/gp/product/B00HPQGTI4?psc=1&redirect=true&ref_=oh_aui_detailpage_o00_s00

This should do it for you. The script comes with an option for overclocking (option 7 here).
Just be aware of heat issues; an overclocked Pi will run hotter. If your Pi is in a room that never gets very hot, you should be fine. Otherwise, I'd recommend that you put a heat sink on it...they're $5 on Amazon.

Also,,,You can get these heatsinks :

https://www.amazon.com/gp/product/B00HPQGTI4/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1

and a small fan to make sure you are always at 1.4Ghz...otherwise it will impact n64,psx,mame2003 emulation...you will see performance decrease as you play and your cpu heats up...thats just the nature of these chips...with fan+ heatsinks you are at 1.4Ghz all day :)

Separately, though the power supply was from CanaKit. I didn't measure the temperature when running N64 games though. It seemed to be doing okay.

To be specific, I got this case, and this motherboard, and this power supply, and this SD card.

The heatsinks are pretty cheap though. $5 for a set of 3.

Since there's no mounting holes, I imagine there used to be a small aluminium heatsink attached to the chip in the past.

You can buy these commonly for the Raspberry Pi, and they're rather cheap.

https://www.amazon.com/dp/B00HPQGTI4/


Be sure to clean any thermal paste on the chip off with some isopropyl alcohol or such before applying one of these heatsinks.

I have these ones Addicore Raspberry Pi Heatsink Set for B B+ 2 and 3 (Set of 3 Aluminum Heat Sinks) https://www.amazon.com/dp/B00HPQGTI4/ref=cm_sw_r_cp_apa_1Rh4ybFTXZW80 and I have a 2.4 amp power supply. Do I need the extra .1?

Thanks you guys so much for your input! I think I will get that case. One more question, I have seen reviews that heat sinks and fans weren't able to fit with this case. Do you have experience with that? Any heat sinks you would recommend?

I found these an Amazon:
Mudder 6 Piece Black Aluminum Heatsink Cooler Cooling Kit for Raspberry Pi 3,Pi 2,Pi Model B+

Addicore Raspberry Pi Heatsink Set for B B+ 2 and 3 (Set of 3 Aluminum Heat Sinks)