Reddit Reddit reviews Makita MAC700 Big Bore 2.0 HP Air Compressor

We found 17 Reddit comments about Makita MAC700 Big Bore 2.0 HP Air Compressor. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Power Tools
Air Compressors & Inflators
Power & Hand Tools
Portable Air Compressors
Makita MAC700 Big Bore 2.0 HP Air Compressor
Cast iron pump with big bore cylinder and piston, combined with greater bore and stroke, delivers maximum performanceSubstantially lower noise levels with a large 1,720 RPM pump, enabling greater displacement at lower RPMLow amp draw reduces incidences of tripped breakers and voltage drop that can cause premature motor failureOil lubricated provides cooler running pump, minimizes wearOne-year manufacturer's warranty
Check price on Amazon

17 Reddit comments about Makita MAC700 Big Bore 2.0 HP Air Compressor:

u/bratling · 5 pointsr/harborfreight

My little Makita is a “big bore” design, similar power to what the HF 21g claims. Nice and quiet. Under 80db from a few feet away.

I’ve been thinking about doing a bad thing… sticking the Makita’s pump & motor into the big cheap HF tank and throw away the noisy HF assembly.

Definitely interested in the new stuff from HF!

u/klineman · 4 pointsr/BuyItForLife

I own this one

http://www.amazon.com/gp/aw/d/B0001Q2VK0/ref=redir_mdp_mobile/187-4516976-8219365

Great machine. Cast iron parts, most quiet compressor I've ever owned. By rough estimation, I'm expecting this to out last me.You can get one with two tanks for more capacity, but its really heavy. Same motor and pump for both one tank or two tanks.

u/emily_prime · 4 pointsr/Tools

I tend to prefer 15 gauge finish nailers mostly because I feel like they can get into tighter spots with the magazine being angled. I've heard others say 15 exterior trim, 16 interior trim.

If your sole/primary use for the air compressor is the nailer get a smaller lighter compressor. My dad gave me his 4 gallon porter cable because its a pain in the ass to move around and he replaced it with a porter cable pancake
(on sale at lowes for $100 until 25th).

If I was spending the money I would buy this http://www.amazon.com/Makita-MAC700-Big-Bore-Compressor/dp/B0001Q2VK0/ easier to move around than my pain in the ass porter cable and running a proper oil lubed pump should mean it will last forever. I'll probably pick one up when I do siding.

u/PIGZEN · 3 pointsr/DIY

As someone who has done a lot of similar projects at home and professionally I could make a couple of recommendations.

I recently bought this Makita compressor and I LOVE it! Recharges in 30 seconds and it's very quiet. Not a huge capacity for say roofing or framing but for moderate jobs you will never be waiting for a pressure.

Also this Harbor Freight 18g brad nailer has proven itself very versatile and reliable over the last five years or so. For $20 you can't beat it for trim work and cabinetry.

u/reimannk · 3 pointsr/HomeImprovement

I have this Makita compressor and I love it since it is pretty easy to haul around. I would stay away from the brands that you mentioned if you are looking for something you want for the long haul. I think you'll have to choose between portability and power though.

u/rothnic · 2 pointsr/BuyItForLife

I looked at way to many of these when trying to find a reasonable sized compressor that could handle light duty paint spraying. I ended up getting a very old 220v craftsmen off craigslist, and a small newer craftsmen for a deal from kmart.

If I didn't need to spray anything and valued portability, this seemed like the best available: http://www.amazon.com/gp/aw/d/B0001Q2VK0

The small craftsmen looked pretty similar but the makita seems to have a better motor, though the craftsmen was oil lubed as well. This is the craftsmen, but I think I only paid $60 or so for it: http://m.kmart.com/index-g.html#/productdetails/010W005319735001P?sid=

Another option if you can find one cheap is the smaller roll around Dewalt 200psi one. http://www.factoryauthorizedoutlet.com/dewalt-heavy-duty-4-5-gallon-200-psi-heavy-duty-hand-carry-air-compressor-w-wheels

u/ultralame · 2 pointsr/DIY

I use mine in my woodshop. The small "pancake" porter cable type compressors are pretty awful (I went through two in 3 years, they are essentially unserviceable) and LOUD.

I then bought this Makita

It is AWESOME. Runs great, and AMAZINGLY QUIET, Amazon is selling it for about $200.

EDIT: Did I mention that it's quiet? In my garage I can talk on the phone while it pumps.

u/kcornet · 1 pointr/HomeImprovement

Pancake compressors are loud. Really loud. REALLY, REALLY loud.

I bought one of these and I've been very happy with it. It is quiet enough to have a conversation around it using a normal voice.

u/Dr012882 · 1 pointr/askcarguys

I have a Makita MAC700(~$200) and it is incredibly quiet. You can have a conversation at normal speaking volume with the compressor running in the same room. The tank isn't huge, so I wouldn't use it for sanding or painting, but it's great for the typical DIY'er in a home garage.

https://smile.amazon.com/gp/aw/d/B0001Q2VK0/

u/Rancid_ballsack · 1 pointr/DIY
u/[deleted] · 1 pointr/DIY

Makita make a pretty awesome compressor that uses compressor oil and it is around 200 bucks.

Link

u/psu409 · 1 pointr/Tools

I've have a lot of DeWalt tools and I love them, but I can't say I have any experience with their compressors, just was looking at them since I know its typically a good brand. I saw one Makita in my budget, I just wasn't sure if it was worth the money since its only 2.5 gallons but also only 130 psi: [Makita MAC700] (https://www.amazon.com/Makita-MAC700-Big-Bore-Compressor/dp/B0001Q2VK0/ref=zg_bs_9022396011_14?_encoding=UTF8&psc=1&refRID=R9DMEE93E13TWRMPH908)

u/GraphicDesignerMom · 1 pointr/HomeImprovement

> https://www.amazon.com/dp/B0001Q2VK0/ref=cm_sw_r_cp_api_qq2dAbFAT770D

I have this one as well and a Porter Cable brad nailer and a couple paslode guns.

That Makita compressor is hands down the best one I've ever used or owned. I'd highly recommend the OP get it and a good gun seperately.

u/ArchitectGeek · 1 pointr/HomeImprovement

I bought a small Makita that has an oiled compressor. Thing is awesome and is amazingly quiet - probably the best thing about it. I can run it in my basement doing work and no one knows. Not a huge air volume, but fine for my tasks.

Makita MAC700 Big Bore 2.0 HP Air Compressor https://www.amazon.com/dp/B0001Q2VK0/ref=cm_sw_r_cp_api_qq2dAbFAT770D

u/lochlainn · 0 pointsr/DIY

Go for a "pancake" or "hot dog" style. They are sufficient for airing up tires and occasional tool use.

Pancake style

HotDog style

Also, in my experience, electric paint rollers are much less hassle for housepaint. Less clogging and easier cleanup.