Reddit reviews Maximum Impact Bolt & Nut Remover Set 13 pieces
We found 10 Reddit comments about Maximum Impact Bolt & Nut Remover Set 13 pieces. Here are the top ones, ranked by their Reddit score.
Maximum Impact Bolt Remover Set is ideal for removing rounded off painted over and rusted bolts and nutsMade from high carbon steel. The set includes: 1/4, 3/8, 1/2, 11/16 SAE; 10, 12, 13, 17 mm; 5/16 _ 8mm, 7/16_ 11mm, 9/16_14mm, 5/8_16mm, & 3/4_19mm, Universal sockets a total of 13 sockets.Left-hand spiral flutes flat wrench use with adjustable wrench or sockets3/8" square drive for use with socket wrench or impact wrenchLaser etched side marking for easy visibility.
something like this? https://www.amazon.com/Maximum-Impact-Bolt-Remover-pieces/dp/B01JDNIYPW?ref_=fsclp_pl_dp_1#customerReviews
Oh I missed that part in your post. yeah, the grind the head off, etc that u/BearFLSTS said is your next move.
Get this: https://www.amazon.com/Maximum-Impact-Bolt-Remover-pieces/dp/B01JDNIYPW
Hammer the closest diameter one on the locking lug. Unscrew. Throw locking lug in trash, go buy new regular lugs.
No type or amount of sealer will work on the outside as you describe. Getting the bolt out can be accomplished in many ways. If a socket will fit on it, one of the bolt extractors like this Maximum Impact Bolt & Nut Remover Set 13 pieces https://www.amazon.com/dp/B01JDNIYPW/ref=cm_sw_r_cp_tai_KsfJBbF0C8HMP may work. Or you can weld a new nut on top the bolt. If the bolt head is accessible, you might be able to grab it with some vice grips. You may be able to hit it with a hammer and chisel to move it a little and wrench it out. You might get lucky with a good quality 6 point socket. You may be able to pound on a cheaply made slightly smaller socket and wrench it out. You could drill / grind / dremel off the bolt head, remove the cover and then grab it with some vice grips and remove it. It all depends on how accessible it is and what resources and tools you have available.
So your lock nut socket broke? Any decent shop should have a tool like this to remove the locking lug nut. Not sure why you need a wheel replacement, unless there is cosmetic damage from attempted removal. Hyundai can get you a replacement lock nut socket but that generally takes a week or more.
I would use an extractor to remove the lock nut and replace it with a standard nut. Unless you live in an area with theft or lug nut tampering, those lock nuts are more trouble than they're worth.
If you do get replacement lock nuts, make sure they match whatever seat style your standard lug nuts use - our local Hyundai dealer keeps putting cone seat lock nuts on vehicles that require washer seat lug nuts. Don't do this!
all the above and you can use these for gripping the head. harbor freight sells a cheap o version if you dont work on cars much and/or wont need a better quality in the future
https://www.amazon.com/Maximum-Impact-Bolt-Remover-pieces/dp/B01JDNIYPW?ref_=fsclp_pl_dp_1
They sell socket sets which take off rounded bolts. They’re like regular sockets but with teeth. Find one, take the one that almost fits on this bolt head, pound it on with a hammer and then back out the bolt.
Here’s one: Maximum Impact Bolt & Nut Remover Set 13 pieces https://www.amazon.com/dp/B01JDNIYPW/ref=cm_sw_r_cp_api_i_kZtCCbH6YTSJX
Maximum Impact Bolt & Nut Remover Set 13 pieces https://smile.amazon.com/dp/B01JDNIYPW/ref=cm_sw_r_cp_apa_i_qORKDb672NW2P
Just a suggestion. You can get/do whatever you want but these have saved my ass quite a few times.
You need to grab a set of sockets the grab on to stripped nuts. Probably just the basic ones 8-15mm would be fine. I've saved my ass countless amount of times. Something like this guy
https://www.amazon.com/Maximum-Impact-Bolt-Remover-pieces/dp/B01JDNIYPW/
What he’s talking about is There are specific sockets called bolt extractors (you’ll want to get a breaker bar for extra leverage) they have teeth in the socket that dig into the bolt and grip into the metal so you can get leverage onto it. They’re specifically designed for this type of job. You could also get an angle grinder and grind the head off if all else fails. A junk yard or major parts store may be able to get you a new bolt.
Don’t know anything about this brand and I’m not suggesting you to buy this specific set but here is an example of what we’re talking about
https://www.amazon.com/Maximum-Impact-Bolt-Remover-pieces/dp/B01JDNIYPW/ref=mp_s_a_1_3?crid=3PX3KLHW58IF3&keywords=bolt%2Bextractor%2Bset&qid=1550536181&s=gateway&sprefix=bolt%2Bex&sr=8-3&th=1&psc=1
I highly recommend a remover set. Essentially they are a set of specialized sockets that have cutting threads to cut into a rusted bolt head to easily remove them. Something like this