Reddit Reddit reviews MEGUIAR'S Smooth Surface Clay Kit – Safe and Easy Car Claying for Smooth as Glass Finish – G1016

We found 28 Reddit comments about MEGUIAR'S Smooth Surface Clay Kit – Safe and Easy Car Claying for Smooth as Glass Finish – G1016. Here are the top ones, ranked by their Reddit score.

Automotive
Car Care
Exterior Care Products
Polishing & Rubbing Compounds
MEGUIAR'S Smooth Surface Clay Kit – Safe and Easy Car Claying for Smooth as Glass Finish – G1016
QUICK CAR CLAYING: Quickly and easily removes bonded surface contaminants like paint overspray, industrial fallout, tree sap mist, road tar and moreGLASSY, SMOOTH FINISH: After using clay, wipe with Supreme Shine Microfiber Towel to restore a smooth, glassy finishBETTER WAX PROTECTION: Wax glides on easily and provides longer-lasting protection after clayingSAFE TO USE: Non-abrasive clay bar works safely on any paint finish including clear coatsCOMPLETE CLAY KIT: Includes two 80 gram premium clay bars, 16 oz Quik Detailer Mist & Wipe, a Supreme Shine Microfiber Towel and a case to store and preserve the clay
Check price on Amazon

28 Reddit comments about MEGUIAR'S Smooth Surface Clay Kit – Safe and Easy Car Claying for Smooth as Glass Finish – G1016:

u/upthereitstheirtime · 72 pointsr/howto

This is what my husband uses to get sap off our cars, works beautifully.
MEGUIAR'S Smooth Surface Clay Kit - Safe and Easy Car Claying for Smooth as Glass Finish - G1016 https://www.amazon.com/dp/B00063X7KG/ref=cm_sw_r_cp_apa_i_3tpqDbY6KDCB6

u/throwawaydudeman666 · 14 pointsr/cars


What has happened is that the minerals from the water have etched their way into the paint. The best way to remove that is with a very light polish that will clean the paint and completely even out the surface using a very light abraisive compound. Using a machine polisher is the most effective way of doing the job.

Here's the recommended tools, they aren't too expensive:

Porter Cable 7424xp polishing kit: https://www.autogeek.net/porter-cable-buffer-value-kit.html

Meguiar's m205 (their lightest polish): https://www.autogeek.net/meguiars-205-polish-8oz.html

Clay bar kit: https://www.amazon.com/Meguiars-G1016-Smooth-Surface-Clay/dp/B00063X7KG

Wax, Meguiar's Ultimate Wax, or other kind of sealant (perhaps Chemical Guy's Jet Seal). And a decent set of microfiber towels.

Wash the car, then use the clay bar to pick up the rest of the contaminants sticking to the paint. Then use the Porter Cable DA polisher. Depending on what condition the paint is determines which pad you need. The finishing pad might be enough to handle light contaminants, but if you need to step up to the cutting pad it is safe to do so. Same for the polishing compound, if m205 isn't enough, then step up the aggressiveness to Meguiar's Ultimate Compound, which is more abraisive. Be aware, after the pad is wet and saturated with polish it won't do any more work, and you'll have to take time to clean the pad with a detergent and water, so its advisable to get a stack of Lake Country green pads for doing a large job.

Here's the polishing tutorial by Mike Phillips: https://www.youtube.com/watch?v=zUHRnHsSXZU


u/pammylorel · 8 pointsr/legaladvice

You fix this with a clay bar. It removes overspray. I oversprayed two vehicles - oops - and half an hour with a clay bar from McGuire's got it cleanly off. It's about $20. "Totalled", my effing ass.

https://www.amazon.com/Meguiars-Smooth-Surface-Clay-Kit/dp/B00063X7KG

u/Rheaonon · 7 pointsr/gifs

Clay bar it, go to walmart or your auto store and get this then get a decent pack of microfiber towels and a good wax. (Be prepared to spend an entire day detailing if you go this route)

u/jwatzman · 5 pointsr/AutoDetailing

1.) Washed the entire car using a large bucket of water and Meguiar's Gold Class Wash Shampoo with a large grout sponge.

2.) Rinsed the car with clean water from a hose and spray nozzle.

3.) Dried the car using The Supreme Guzzler Waffle Weave by Cobra

4.) Clayed the car using Meguiar's Smooth Surface Clay Kit

5.) Buffed the car with a microfiber towel as I went over it with the clay.

6.) Waxed the car using a dual action polisher and Meguiar's NXT Generation Tech Wax 2.0

7.) Buffed again with a microfiber towel as I went over each panel.

u/jxhenson91 · 5 pointsr/SVRiders

certainly.

  1. wash bike from to to bottom, after that use a clay bar on the paint! cant stress that enough. It removes all the embedded contaminants that the wash doesn't remove.https://www.amazon.com/Meguiars-Smooth-Surface-Clay-Kit/dp/B00063X7KG

  2. grab your buffing wheel (witch I used) or apply by hand some compound this is what I used https://www.amazon.com/Meguiars-G17216-Ultimate-Compound-15-2/dp/B001O7PNNM?th=1 use medium pressure with this, its super easy to put on and off. Just follow the instructions.

  3. after your done compounding the paint apply a polish, let it dry to a haze and wipe off. I used something like this https://www.amazon.com/Chemical-Guys-GAP-106-16-Polish-Sealant/dp/B004LPAP2I/ref=sr_1_10?s=automotive&ie=UTF8&qid=1486936548&sr=1-10&keywords=car+polish

  4. and final step, apply your wax to protect all your hard work, same application as the polish https://www.amazon.com/Meguiars-Ultimate-Liquid-Wax-oz/dp/B004HCM9H4/ref=sr_1_4?s=automotive&ie=UTF8&qid=1486936678&sr=1-4&keywords=car+wax

  5. also clay bar your wheels if they have a clear coat on them then apply a wax, don't get too crazy on them, but get the protection on so they stay shiny

  6. in between washings/ waxings use a quick detail spray

    also see r/AutoDetailing for the noob questions/ info. Its a huge help. so is Youtube! hope that points you in the right direction!
u/FightOrFlight · 4 pointsr/AutoDetailing

It's hard to tell how bad it is from those pictures. I would start by getting the meguiars clay kit. Here is a video showing how.

u/oc412 · 3 pointsr/AutoDetailing

I go to swap meets here in SoCal and find these [Meguiars Clay Bar Kits] (https://www.amazon.com/Meguiars-G1016-Smooth-Surface-Clay/dp/B00063X7KG/ref=sr_1_1?ie=UTF8&qid=1464801627&sr=8-1&keywords=meguiars+clay+bar+kit) all the time. I usually pay $5-$8 depending on the vendor. Right now on Amazon its CHEAP for $13.58. The lowest price since 2011 on Amazon according to CCC. There are two clay bars in each package. I use a nanoskin sponge but have these laying around and buy them any chance I get. They are always brand new and never used. They normally have some sort of return labels taped to them so I am not sure where they come from. I've never asked. You can also look into buying in bulk from [ali express] (http://www.aliexpress.com/item/4pcs-lot-180g-Magic-Car-truck-Clean-Clay-Bar-Auto-Detailing-Cleaner-Car-Washer-Blue-3M/32267681185.html?spm=2114.01010208.3.11.4uwzZl&ws_ab_test=searchweb201556_10,searchweb201602_1_10017_10021_507_10022_10020_10009_401_10008_10018_10019_101,searchweb201603_2&btsid=3e5d4cc5-bc83-48b4-96c3-ff72028dd53c) from china.

u/trainspotting2 · 3 pointsr/cars

Try something that's made to be used on paint, like Stoner Tarminator, or a clay bar kit before you go to gasoline. Start gentle, use the harsh stuff only as a last resort.

u/WheelWhiffCelly · 2 pointsr/GolfGTI

Meguiar's smooth surface clay kit. First time claying for me so take what I say with several grains of salt haha. Seemed to work pretty well, I did have to really focus on certain spots though (I think I had some sort of adhesive or glue from the dealership days)

u/CleanFlow · 2 pointsr/AutoDetailing

>Whistles That is one NICE looking hood, you almost have me drooling on what the truck could look like. Ok so!

>1st: Nice two bucket cleaning

>2nd: Clay the car. was thinking of ordering this. From what I picked up from that Porsche 912 video in the sub and from the sidebar, I spray the clay lubricant on, then with little to no pressure wipe back and forth with the clay in a 18"x18" area. Does that sound right?

>3rd: Acquire rubbing compound and hopefully a DA polisher. (By the way if getting a DA polisher isn't possible, is this still attainable by hand?)

>4: Nice coat of wax

>How does that sound?

Correct. A 2-bucket wash will get most of the dirt off while not marring the paint any further than it already is.

Also, that is a very good clay kit. I will pre-warn you, claying is the absolute worst part of the job. It's rewarding afterward, but such a pain. If you want, there is stuff called "nanoskin" that has pretty much the same effect as clay but it requires a lot less effort. Check Amazon for "nanoskin fine grade sponge." It's like 11 bucks. Note that you'll still need to buy a quick detailer like the one in the clay kit for general purpose spray, so you may want to go for the clay kit. Get nanoskin when you're a little more familiar with detailing.

As you rub the clay, be sure it's well lubricated so the clay just glides. You will feel resistance to the gliding until the clay picks up all the grime. Then the clay will flow smooth. That's when you knead it and move to a new section.

If you choose to go DA polisher, beware that there are a lot more purchases that go along with it. You'll also need a backing plate and pads. That can become pricey. Polishing is attainable by hand, but very time-consuming. I'd recommend going panel by panel, day by day with hand method. Claying an entire car, then hand polishing it will make you want to never touch a car again haha.

I recommend you wash and clay the roof, then polish and wax. On a different day, do the same to the hood. The next day, tackle a quarter-panel. This will keep you sane.

u/Thats_a_lot_of_nuts · 2 pointsr/AutoDetailing

https://www.amazon.com/Meguiars-G1016-Smooth-Surface-Clay/dp/B00063X7KG

Also, you might want to check out this video, it pretty much covers the whole process, using the same products in the Blackfire kit:

https://youtu.be/-YIYfAS9vR4

u/liquidh20 · 2 pointsr/Rochester

i have this stuff to clay

http://www.amazon.com/Meguiars-Smooth-Surface-Clay-Kit/dp/B00063X7KG/ref=sr_1_1?s=automotive&ie=UTF8&qid=1377392115&sr=1-1&keywords=meguiar%27s+clay

and alright i think i got it, its about 100 but at least i can do it multiple times. i guess the whole thing is going to take a couple of hours

u/Fyrel · 2 pointsr/AutoDetailing

The kit's still available from Amazon, and some auto stores might have it too. I prefer using soap or a diluted rinseless wash like Optimum No Rinse to keep the price down though.

u/ChickenNuggetTime · 2 pointsr/homemaking

The easiest answer is to avoid spots by hand-drying glassware after washing and thoroughly rinsing them.

For a quick shine before setting the table, a barely/partially damp lint-free cloth should work. Something similar to a car chamois/shammy, perhaps.

If, like me, you have awful hard water leaving heavy deposits on your glassware, it's a bit more involved. I've used a clay-bar kit (mostly out of curiosity) with great results; nothing short of that seems to work, however.

u/hawkens85 · 2 pointsr/videos

First off, the subreddit that inspired me to start cleaning cars: /r/AutoDetailing . They've got some great material there, along with resources, instructions, and more.

First, clean the windshield. If it's not been done in a while, you'll have to do it very well. Prepping the windshield is the most critical part to a good coat of RainX. My preferred method is to begin after washing the car. Get some good glass cleaner, like Stoners, spray it over the windshield, then use a razor blade, holding it at a 45 degree angle to the glass, to scrape down the windshield in and up and down and side to side pattern. This won't scratch the glass, but help remove embedded particles. After you've finished scraping the glass, wipe down the excess window cleaner with a clean microfiber towel. Then use a clay bar to go over the glass one more time. This picks up any additional leftover contaminants left in the glass. Because it's clay, it will want to stick to the glass, so you can use the Stoners as lubrication. Once done, wipe the excess off with a window with some type of glass rag. Now you can apply RainX. Using a microfiber towel folded a few times, put a small amount of RainX in a corner and begin working into the glass (I've seen AmmoNYC use foam from packaging before). Use circular motions and check it from a few angles to make sure you've covered everything. The product should form a "haze" a few seconds after application. A little bit goes a long way with RainX. Some guys recommend turning on your windshield defrosters and running them as hot as possible for a few minutes before applying the RainX, I've not noticed a huge difference. After 5-10 minutes, use a glass towel to begin buffing it off. You can sprinkle a little bit of water on the window during this process to help take it off, but I just stick to the towel. You can apply a 2nd coat immediately after for improved results, but anything beyond that doesn't help. Double check your working by looking at the glass from all angles (inside/outside) to make sure you didn't miss a spot. Enjoy driving in the rain with no need for windshield wipers above 35mph!

Hope this helps. Again, prepping the glass is the most critical part. You're creating a clean surface to put on the hydrophobic materials of RainX. If there's dirt still in the glass, that's something the water can hold on to and not bead off properly.

u/coredumperror · 2 pointsr/teslamotors

Anyone around here got a lot of experience with detailing cars? My Model 3 got covered in thousands of flecks of tree sap a few weeks ago, and while clay barring it over the weekend removed most of it (and finally made my windshield non-dangerous when facing the sun), it didn't quite remove all of the sap. There are still very slight flecks visible in the windshield when looking through it from the inside directly at a light source. It looks like this, but much less pronounced (that photo was taken before the clay bar).

I would love to remove the last of these flecks and bring my windshield back to its pristine transparency from when I got it delivered 2 months ago, but I just don't have a clue what to do. This was the very first time I've ever done clay bar, and I used this product. Maybe a different product would get rid of the last remnants of that sap?

u/AverageGuy16 · 2 pointsr/4Runner

My fault forgot to reply to this.

So this is the final polishing boat wax I used. In addition to this I also used this and this. For the clay bar I used Meguirs. For the tire shine I used this.

u/DMAC55 · 2 pointsr/AutoDetailing

Well I've just started getting together my own kit and felt I HAD to get these:

  1. Meguiar's Clay bars and quik detail spray

  2. Butt-load of microfiber towels

  3. Waffle-weave drying towel

  4. Grit-guards

  5. Iron X wheel cleaner

  6. Industrial Spray bottles

  7. Meguiar's Gold Class car wash soap

  8. Meguiar's Gold Class Wax

  9. Purple Power

  10. Proper wash mitt

    I still feel like there are atleast ten other products that I NEED!

    -Pressure Washer

    -Foam Cannon

    -Detailing brushes

    -Sealants/Compounds combined with a proper rotor drill

    -ETC

u/Schneiderman · 2 pointsr/AutoDetailing

Cool, so if you want to do it yourself, the basic things you need will be a clay bar (often sold as a kit with the "quick detailer" you need as a lubricant- see here). You will need a good number of microfiber cloths throughout the process. And then the main thing, is you need a dual-action polisher.

Popular options for the polisher include Harbor Freight, Porter-Cable, and Meguiar's. A lot of people have good results with the Harbor Freight polisher which you can pick up for, off the top of my head, something like $70. The porter-cable 7424XP is like $120ish, and the Meguiar's MT300 is about $200. Of course, if you wanted to spend more, there's Flex and Rupes, but you don't need any of that for personal use.

With the polisher, you will need pads- in your case, some pretty aggressive cutting pads along with finer polishing and finishing pads. There are a ton of options here. I would recommend at least two of each level of aggressiveness.

And with that, you will need compound and polish. Again, lots of options here, but at the very least you will want one more aggressive type of compound and then a finer type of polish.

You'll also want a couple other things, like a brush and soap to clean your pads with, and I recommend looking into using a diluted alcohol solution to clean between compounding and polishing steps.

I personally am a fan of Meguiar's, and in my opinion their lineup makes thing fairly simple. If you want to go the most cost-effective route, you could still buy the Harbor Freight polisher, and then use meguiar's pads and product (many people say the Harbor Freight pads are garbage, I have never used them so I don't really know).

As an example, you could use the Harbor Freight polisher, with Meguiar's microfiber cutting pads and M105 compound, then Meguiar's foam polishing pad and M205 polish.

There are so many options it's easy to get lost and confused, overall I think as long as you do enough research to understand the process of

washing->decontaminating->compounding->polishing

it won't make that much of a difference what products you use.

Look up Junkman's series of videos! In one set he stands up and dances on the hood of his car and then shows you how to fix the damage.

u/anstormning · 1 pointr/AutoDetailing

Hello! I bought a new car a little over a month ago and I wanted to do some basic cleaning with it, stuff that can be done maybe a couple times a month, since I never personally did that with my previous car.

Anyways, I live in SoCal so I'm trying to keep water usage to a minimum. This is my current "to-purchase" list that I'd like to buy soon;

ONR

iK Sprayer

Iron X

TRC Creature Edgeless 10pack

Mother's Tire Brush

ABN Wheel Woolies

Stoner's Reach Tool

Already have: Stoner's Invisible Glass, Costco multipack MF towels.

Will I still want to get a clay bar + wax for after washing, or is just washing every so often enough?

u/Kong28 · 1 pointr/AutoDetailing

Whistles That is one NICE looking hood, you almost have me drooling on what the truck could look like. Ok so!

1st: Nice two bucket cleaning

2nd: Clay the car. was thinking of ordering this. From what I picked up from that Porsche 912 video in the sub and from the sidebar, I spray the clay lubricant on, then with little to no pressure wipe back and forth with the clay in a 18"x18" area. Does that sound right?

3rd: Acquire rubbing compound and hopefully a DA polisher. (By the way if getting a DA polisher isn't possible, is this still attainable by hand?)

4: Nice coat of wax

How does that sound?

u/lostwanderent · 1 pointr/Miata

I used Griots clay and used Griots Speed Shine as clay lube.

Meguiars makes a great clay kit though that you can find at any autoparts store.

I should mention that I did also polish the car earlier this summer. So, it has had some extra care.

u/shibe4lyfe · 1 pointr/AutoDetailing

I'm planning on getting this clay kit to get some surface rust spots off of my car. Does the Quik Detailer work as a wax/sealant or is it just for lubrication while claying? If it's just for lube what wax/sealant/applicators would you guys recommend? I'm not looking to spend a lot. Thanks!

u/MeIsMyName · 1 pointr/AutoDetailing

This is correct. I'd start with Clay like this though:

http://www.amazon.com/Meguiars-G1016-Smooth-Surface-Clay/dp/B00063X7KG

You can also find it at local auto parts stores. It will help remove any above-surface damage, and will do a good job of showing you what you're working with.