Reddit reviews Microphone Stand - Universal Mic Mount with Heavy Compact Base, Height Adjustable (2.8’ - 5’ ft.)- PMKS5
We found 8 Reddit comments about Microphone Stand - Universal Mic Mount with Heavy Compact Base, Height Adjustable (2.8’ - 5’ ft.)- PMKS5. Here are the top ones, ranked by their Reddit score.
HEIGHT ADJUSTABLE: Pyle compact base microphone stand smoothly quick and easy, raise or lower height adjustment from 33.5" inch to 60.24'' inches high. Also, Pyle used USA standard 5/8 x 27 external thread sizeRELIABLE STURDY BASE: It is solid die-cast and base for about 235mm in diameter. Pyle mic stand will provide stability and precise balance to avoid it from falling. And 9.92 lbs. counterweight for a stable microphone placementCONVENIENT DESIGN: This is an ideal mic stand for the musician that’s always on the go. It’s ultra-light pack up with sleek black finish is ultra-light for easy transport. It is also built compactly to be both durable for long term useSTUDIO AND CONCERT USE: Perfect mic holder positioning and optimal pickup for the studio and concert performances. The Pyle PMKS5 is a class at its ownWORRY-FREE SHOPPING: With the Pyle PMKS5, we are confident of the quality of our product, therefore, we offer a 30-day money back guarantee no questions asked
I used the Pyle Compact Base Black Microphone Stand:
https://www.amazon.com/gp/product/B002PAW6AU/
I'm not the first to do this and I've seen others do similar projects but all the stands were discontinued and I couldn't find one that would fit through the holes in the camera stand. Luckily, it didn't matter as this should work for all stands that you can unscrew the top off of. I also wanted one with as low of a profile as possible so I could put it on the same shelf as the soundbar. It...barely fits as the base is closer to 9.75 inches as opposed to the 9.25 advertised. It has nice rubber bumps you attach at the bottom to prevent scratches.
I have my camera off center because that's the couch's center and, unlike PS3 move games, it doesn't matter where the camera is really. I played Sparc and Astrobot at the high height. Sparc was fantastic. Astrobot was different in the challenge mode with the ropes (#4) as everything was angled differently. Lowering it back to standard height is all that's needed to fix that. If there's any other questions, feel free to ask.
Also, if you're doing this, be mindful of you camera cable length. If I were to go much higher, I'd have to move my PS4 up to be able to have enough length.
You'll probably have to build yourself a stage unless you want to buy your own, but that can be pricey.
You'd want a mixer, XLRs, microphone, microphone stand, and speaker
I use this https://www.amazon.com/Pyle-Compact-Black-Microphone-Stand/dp/B002PAW6AU/ref=mp_s_a_1_4?ie=UTF8&qid=1543180743&sr=8-4&pi=AC_SX236_SY340_FMwebp_QL65&keywords=mic+stand&dpPl=1&dpID=31UpihynW2L&ref=plSrch works perfect. Can adjust it high and low.
I just bought this one: https://www.amazon.com/gp/product/B002PAW6AU/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1
It's $20 and does the job. It can raise up to almost 6 feet on its own. You can put it on top of a box or a coffee table or something if you want to get crazy with the height.
And when you're not using your VR, you can just tuck the whole stand away in the corner.
Definitely wait to buy any games. The demo disc has SO many great experiences to choose from and try out. You might find out that you'd rather spend $60 on two or three smaller games and wait for eve to go on sale or something.
I spent my extra money on the collective minds stand and a microphone stand to mount my camera to.
Oh and a couple of games
It's this stand with this isolation shield.
The booth is 2m tall, but I'm kinda short at 5'6" so it's plenty tall enough for me.
My only worry would be them falling down and being damaged.
Get yourself a mic stand ($12): Pyle-Pro PMKS5 Compact Base Black Microphone Stand https://www.amazon.com/dp/B002PAW6AU/ref=cm_sw_r_cp_api_VKfCyb1TX5N61
And a stereo bar ($13): K & M Microphone Bar https://www.amazon.com/dp/B001G43G96/ref=cm_sw_r_cp_api_HLfCyb9HQQH39
And save yourself headache and the possibility of having to replace two perfectly fine microphones.
custom made sensors stands that were stained to match the furniture. You can do the same with parts at home depot. The base is 7" in diameter. The height is 6 feet and it has a whole for the sensor drilled in the top slightly diagonal as it goes in so its easier to tilt the sensor head down.
http://imgur.com/jvM0nz5
An alternative that a couple of others have mentioned is a microphone stand that musicians use with an adapter for the Sensor to be held in place. Though I don't have the parts for that, a few google searches and you should be able to find that in black and it will be very very stable. Here are some examples, though I am not endorsing any of them and I have not tried any of them. It's just to help your search.
https://www.reddit.com/r/oculus/comments/5i6a1q/how_do_you_guys_mount_the_sensor_to_a_different/
https://www.amazon.com/AmazonBasics-Tripod-Boom-Microphone-Stand/dp/B019NY2PKG/ref=sr_1_5?ie=UTF8&qid=1470105028&sr=8-5&keywords=boom+stand
https://www.amazon.com/Besteam-Tripod-Camera-Reflector-Backdrop/dp/B00Y4FVLYG/ref=sr_1_4?ie=UTF8&qid=1470106459&sr=8-4&keywords=tripod+clamp
http://www.officedepot.com/a/products/862319/Pyle-PMKS7-Microphone-Stand/?cm_mmc=PLA-_-Google-_-Carts_Stands-_-862319-VQ6-51194686916-VQ16-c-VQ17-pla-VQ18-online-VQ19-862319-VQ20-101645758436-VQ21--VQ22-624116539-VQ27-10575762236&adpos=1o2&creative=51194686916&device=c&matchtype=&network=g&gclid=Cj0KEQiA-_HDBRD2lomhoufc1JkBEiQA0TVMmtsp0KTV9tzBiUORSJneqV7rbW1hc1T9L2CmBnlhn4kaAjh68P8HAQ
https://www.amazon.com/gp/product/B002PAW6AU/ref=s9_acsd_top_hd_bw_boF8Z_c_x_3_w?pf_rd_m=ATVPDKIKX0DER&pf_rd_s=merchandised-search-4&pf_rd_r=TZJ02MW4073KAD0HJ6MH&pf_rd_t=101&pf_rd_p=d09ed676-c29a-50bf-8910-69f2cb3d881a&pf_rd_i=11974591