Reddit Reddit reviews Monoprice USB Extender over CAT5E or CAT6 Connection up to 150ft

We found 35 Reddit comments about Monoprice USB Extender over CAT5E or CAT6 Connection up to 150ft. Here are the top ones, ranked by their Reddit score.

Computer Networking
Electronics
Computers & Accessories
USB Computer Network Adapters
Computer Network Adapters
Monoprice USB Extender over CAT5E or CAT6 Connection up to 150ft
USB specifications limit the maximum run for USB to only 15ftThis can make placement of USB devices difficult especially in a wide areaThis can be especially convenient if you already have unused Ethernet cabling pre-installed in your walls
Check price on Amazon

35 Reddit comments about Monoprice USB Extender over CAT5E or CAT6 Connection up to 150ft:

u/mbazdell · 5 pointsr/pcmasterrace

Something like this. The OP link then is probably the same thing but the person who took the picture had no idea what it is. This is funnier now.

u/ravioliisgood · 4 pointsr/msp

This is the one I used. Currently unavailable from Amazon but Monoprice might have it in their website.

Monoprice USB Extender over CAT5E or CAT6 Connection up to 150ft https://www.amazon.com/dp/B003L14ZTC/ref=cm_sw_r_cp_api_1BuPBb72WB7KB

u/impreza25sti · 3 pointsr/htpc
u/oblogic7 · 3 pointsr/zwave

Monoprice USB Extender over CAT5E or CAT6 Connection up to 150ft https://www.amazon.com/dp/B003L14ZTC/ref=cm_sw_r_cp_api_i_ZxwcBb3X14395


Why do you restart HA so frequently?

u/flaming_m0e · 3 pointsr/HomeNetworking

Use an Ethernet extension. Something like this: Monoprice USB Extender over CAT5E or CAT6 Connection up to 150ft https://www.amazon.com/dp/B003L14ZTC/ref=cm_sw_r_cp_apa_gAjgAbH532FEK

u/LoganRan · 2 pointsr/htpc

I just purchased some of these to do the same thing in my master bedroom and the living room. So going to my tv is 1 long HDMI cable (about 50ft) and a Cat 5e cable. So far they are working well. Also I did buy that exact same USB Hub for the TV end of the connection.

USB can go 15m from what i remember.

https://amzn.com/B003L14ZTC

u/throwaway_for_keeps · 2 pointsr/techtheatre

Would something like this work in conjunction with a VGA cable?

We already have Ethernet cable and vga cable, and it would seem we'd still have to extend a proper KVM box somehow.

u/LittleHelperRobot · 2 pointsr/htpc

Non-mobile: http://www.amazon.com/dp/B003L14ZTC/ref=mp_s_a_1_1?qid=1426986198&sr=8-1&keywords=usb+ethernet+extender&pi=AC_SX200_QL40

^That's ^why ^I'm ^here, ^I ^don't ^judge ^you. ^PM ^/u/xl0 ^if ^I'm ^causing ^any ^trouble. ^WUT?

u/Arm-the-homeless · 2 pointsr/buildapc

Eh, not really.

This device requires ethernet, right?

http://www.amazon.com/Portta-PET30DP-10-Inch-Extender-Cables/dp/B003LZA95W/ref=sr_1_3?ie=UTF8&qid=1421190159&sr=8-3&keywords=hdmi+over+cat6&pebp=1421190255020&peasin=B003LZA95W#productDetails

Most modern graphics cards have at least 2 outputs, and there are cheap converters between dvi>hdmi or displayport>hdmi

Oh, for the USB...
http://www.amazon.com/Monoprice-Extender-CAT5E-Connection-150ft/dp/B003L14ZTC/ref=sr_1_1?ie=UTF8&qid=1421190187&sr=8-1&keywords=usb+over+cat6&pebp=1421190545439&peasin=B003L14ZTC

Use a logitech wireless kb/mouse combo with the unified receiver and that takes care of kb/mouse. You could use a cheap hub if you wanted to use a game controller. Signal degradation (or rather ACK timeouts) only really cause problems when you're trying to transmit data like with an external HD, for simple HID you'd be surprised how long of a cable you can use.

If you've got to run ethernet to the TV, it's no more trouble to run 3 wires instead of 1. If you're doing it the right way instead of the halfassed way, it's still going to require cutting a hole in drywall to hide the wires. Cat5e/Cat6 cable is cheap as dirt anyway. No lag from streaming and this is the same price or cheaper.

I guess if you wanted to do this with multiple screens in different rooms it might make sense, but otherwise I don't see much point.

u/chronop · 2 pointsr/techsupport

The USB standard doesn't support enough cable length to make this work, but Ethernet definitely does. You could run Ethernet drops (Cat6 preferred) between the locations, and then use a set of USB over Ethernet adapters to make the connections, like this

This is probably your best option, you do have others such as using your network to create RTMP streams or using a WiFi bridge with the adapters I mentioned but you will get lower latency and better performance if you can use Ethernet.

u/heroin1994 · 2 pointsr/CableManagement

Im talking about these

Yeah my mistake, its not adapter, its an extender

u/dysfunkshun · 2 pointsr/HomeNetworking

Perfectly! Put an RJ45 on each end, then there's a transmitter and receiver. I plug one end into my nvidia shield or vivopc, other end by the TV with wireless dongle and presto! This is the ones I use, I have 2 and haven't had a problem with them at all:

Monoprice USB Extender over CAT5E or CAT6 Connection up to 150ft https://www.amazon.com/dp/B003L14ZTC/ref=cm_sw_r_other_apa_uWKuxbTAWFAYG

u/skylartaylor · 2 pointsr/homeassistant

I've not tried it personally, but a person used ser2net & socat to share a USB device (in their case a z wave hub) over IP to their home assistant instance. They wrote an article about it here:

https://blog.paul-steele.com/tech/2018/12/25/homeassistant-kubernetes-zwave-oh-my.html

Of course, this requires another device which may be more of a pain than a USB extender.

There are also USB over Ethernet adapter which would let you run much further: https://www.amazon.com/Monoprice-Extender-CAT5E-Connection-150ft/dp/B003L14ZTC

u/Kirby6365 · 2 pointsr/homeassistant

Definitely don't try just add random amounts of cat5/6 to your antenna. That won't work.

Here's a monoprice USB extender. Not sure how good it is, but it's pretty cheap:
https://www.amazon.com/Monoprice-Extender-CAT5E-Connection-150ft/dp/B003L14ZTC

Do you actually have a separate Ethernet jack you can use for this? Also, not sure if wyzesense supports multiple instances of the device at once?

u/okpgreg · 1 pointr/htpc

Thanks for the follow-up. I ended up going with this cat5/6 extender: http://smile.amazon.com/gp/product/B003L14ZTC/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1 so hopefully it will work out. My turn to post a follow up when I get some results!

u/Lurking_Grue · 1 pointr/pcmasterrace

I suppose you could just add one more cat 5 cable and use one of these for the controller and reduce the lag:

http://www.amazon.com/gp/product/B003L14ZTC?keywords=usb%20over%20ethernet%20adapter&qid=1448942599&ref_=sr_1_1&sr=8-1

u/txhackerz · 1 pointr/homeautomation

It's powered by usb right?
Don't see why something like this wouldn't work

Monoprice USB Extender over CAT5E or CAT6 Connection up to 150ft https://www.amazon.com/dp/B003L14ZTC/ref=cm_sw_r_cp_api_Ndsgyb5Z57EHY

u/nashkara · 1 pointr/homeautomation

Yeah, mix the POE with a device like this (first one I found on Amazon) https://www.amazon.com/dp/B003L14ZTC/ref=cm_sw_r_cp_api_Ndsgyb5Z57EHY


That should get the power there. Of course, the splitter is bigger that the entire Multisensor device.

u/primeski · 1 pointr/HomeImprovement

This was already mentioned but I'm using these currently, it's USB over about 100 feet, but don't go any more than 150 if you can help it. http://www.amazon.com/Monoprice-Extender-CAT5E-Connection-150ft/dp/B003L14ZTC/ref=sr_1_1?ie=UTF8&qid=1451270021&sr=8-1&keywords=usb+over+ethernet+adapters

u/w2tpmf · 1 pointr/computers

They make extenders to run both USB and HDMI over a cay5 network cable.

Another option would be to leave your computer where it is and get some tubing to vent your computer's heat out of the room.

u/fl3abag · 1 pointr/sysadmin

You're getting HDMI over ethernet, why not USB over ethernet?

*I haven't used these types of products yet.

u/Eisenstein · 1 pointr/techsupport

Well, good news is that the idea I tossed out to use CAT6 cable to do it has be done for you, if you want to buy some cheap adapters:

u/sgruby · 1 pointr/homeassistant

I moved from a Vera Edge to an Aeotec stick and haven't been happier. I'm running HA on VMWare Fusion. If you go this route, check out this article on how to get the USB stick to always reconnect when your VM restarts. My Vera served me well for 5 years (I had a Vera Lite before the Edge), but I always got nervous with their firmware updates as it was all a black box that sometimes just stopped working and I couldn't figure out why.

​

I find that things are more responsive with the stick directly on HA. As others have mentioned, being able to get under the hood is also a plus for me as I had no idea what Vera was doing sometimes. I'm using just about all Leviton devices and they work fine. The only device I still haven't been able to pair on HA (that worked on Vera) is an old Wayne Dalton Homelink to Z-Wave bridge. The devices that really gave me trouble that I had no problems with Vera are Leviton VRCZ4-M0Z in-wall controllers. However, after a bit of tinkering, I figured it out and wrote a blog entry about it.

​

If you have problems with pairing and need the stick closer to your devices, consider a USB over Cat6 extender. You plug one end into the computer, plug the stick into the other and run Cat6 between them. I used a similar product (not the Monoprice one, but one I've had for 9 years or so) and it worked fine.

​

As for PIN codes, they are easy to handle. With the current version of HA, you don't use the Open Z-Wave control panel, but go into the Z-Wave configuration for HA, select your lock, scroll down and look at the Node user codes. You select a code slot, enter the code (in HEX) and hit Set Usercode. It's pretty straight forward; just make sure you secure add the locks otherwise you won't be able to set the codes.

​

Good luck!

u/Enlightenment777 · 1 pointr/AskElectronics

If you have an Arduino with a USB connection, then it's going to be harder to extend the distance, because it's a USB issue, instead of an Arduino issue. There are commercial solutions to extend USB, such as USB to ethernet to USB, or USB to fiber optics to USB, or other concepts. Some solutions are expensive, some cheap.

https://www.amazon.com/Monoprice-Extender-CAT5E-Connection-150ft/dp/B003L14ZTC

If you use another type of Arduino that doesn't have integrated USB, then you could use RS485 / RS422 / RS232 / alternate async transport, then convert back to UART connection to connect to the Arduino.

https://www.arduino.cc/en/Main/ArduinoBoardPro

You could use an RS232 extender, similar to the top concept.

https://www.monoprice.com/product?p_id=3598

u/thisadviceisworthles · 1 pointr/homelab

25 Feet is well within the HDMI spec. That plus an active USB cable leading to a hub. Just run as many HDMI cables as monitors.

But what if it is out of the reach of HDMI, or if you already have Cat6 lines run to where you want to use it.

Solution (For under $200):
HDMI Balun (4)
Amazon

USB over Ethernet
Amazon

u/Dstanding · 1 pointr/buildapc

One, and two.

I can't speak for latency, though.

u/thorskicoach · 1 pointr/hometheater

https://www.amazon.com/Portta-PET30DP-10-Inch-Extender-Cables/dp/B003LZA95W

then if you can fish a 3rd cable, you can do USB over that... allegedly, with https://www.amazon.com/Monoprice-Extender-CAT5E-Connection-150ft/dp/B003L14ZTC

be aware with USB as depending on the speed (USB 2.0 480MBit) it may not like being >5m in the USB spec for timing etc. It might speed bumb down to like the 11Mbits, which is fine for a remote which probably connects only at that anyway.

If you want file access for movies, use ethernet for ethernet!

u/homr57 · 0 pointsr/buildapc

This is the answer. I faced a similar problem where I work and solved it with a USB Extender over CAT5

u/OnEMoReTrY121 · 0 pointsr/HomeNetworking

Seems like maybe something like this could work? https://www.amazon.com/Monoprice-Extender-CAT5E-Connection-150ft/dp/B003L14ZTC/ref=pd_sim_147_1?_encoding=UTF8&psc=1&refRID=TR8XYR73JRC4KHVGC1GY

Instead of running USB, I can easily just switch it out for ethernet, I just don't know if it would supply enough power to go through a wall plate and power a wireless keyboard, hmm.