Reddit reviews Nicole- Multi-purpose Heat Gun Tool with Stand Is Perfect for Embossing, Drying Paint & More (Colors May Vary)
We found 3 Reddit comments about Nicole- Multi-purpose Heat Gun Tool with Stand Is Perfect for Embossing, Drying Paint & More (Colors May Vary). Here are the top ones, ranked by their Reddit score.
Melts embossing powder to create a raised, shiny, embossed impression without blowing powder away.Great for drying paint, shrinking gift wrap and much more!Features a clear plastic shield that covers the hot metal nozzle, an on/off switch and fold away stand.UL Approved650 degrees F / 350 degrees C. 320 Watts, 3 amps, 120V
Also, this is the heating gun I used and I didn't have any problems!
If you'd just like a raised/colored look, you could also use embossing powder.
You'd need: (1) a rubber stamp in a shape you like (like this wax seal style one), (2) some fine embossing powder in a color you like, (3) an embossing ink pad and (4) an embossing gun.
I don't know if your IEMs are different, but when some older ones I had failed, there was no good way to access the cable. (The unit was press/glue fitted together. From a quick search, the ones you have don't look much better.) I recommend that you buy a soldering iron kit and solder the wire back together instead of replacing the cable. Heat shrink tubing is recommended to prevent the same cable from failing in that location again.
Those cables are covered in varnish, so twist them together and then use the soldering iron to burn off the varnish while you solder the two wires together. If using heat shrink, use 2 layers: one for the inner wires, then one for the entire cable. You can shrink heat shrink with a lighter or a heat gun.