Reddit reviews NIUBEE 2 Pack Acrylic Riser Display Shelf for Amiibo Funko POP Figures, Cupcakes Stand for Table,Cabinet, Countertops - 3-Tier, Clear (Large)

https://www.amazon.com/gp/product/B07559P21F/ref=ppx_yo_dt_b_asin_title_o06_s00?ie=UTF8&psc=1 But, if there's something better, I'm all ears. This gets the job done, but I feel like there could be something better.

NIUBEE 2 Pack Acrylic Riser Display Shelf for Amiibo Funko POP Figures, Cupcakes Stand for Table,Cabinet, Countertops - 3-Tier, Clear (12×8.75) https://www.amazon.com/dp/B07559P21F/ref=cm_sw_r_cp_api_i_OOtQCbRVH5DH8

I have both of these:
Acrylic Riser Stand Shelf for... https://www.amazon.com/dp/B07559P21F?ref=yo_pop_ma_swf

InterDesign Linus Spice Rack,... https://www.amazon.com/dp/B001KOTJTS?ref=yo_pop_ma_swf

The IKEA Detolf cabinet is really nice. Looks fantastic, and is very affordable, I believe its 60 bucks. Ive seen so also other collectors on this sub also use the detolf cabinet, and everyone ive talked to about it loves it as well. I also use some typical acrylic risers from Amazon. Makes it so each shelf can hold around 36 amiibo (4 shelves, 144 amiibo total).

Shelf:

https://m2.ikea.com/us/en/p/detolf-glass-door-cabinet-black-brown-10119206/

Risers:

NIUBEE 2 Pack Acrylic Riser Display Shelf for Amiibo Funko POP Figures, Cupcakes Stand for Table,Cabinet, Countertops - 3-Tier, Clear (12×8.75) https://www.amazon.com/dp/B07559P21F/ref=cm_sw_r_cp_apa_i_f8Q6CbWW5Q03Q

For the risers definitely get the 12 by 8.75.

I hope this helps! :)

https://www.amazon.com/gp/aw/d/B07559P21F/ref=sxts_1?ie=UTF8&qid=1522884930&sr=1&pi=AC_SX236_SY340_FMwebp_QL65

Did that work? They're made by Niubee. I bought the 12" x 8.75" version, but there was another size option.

NIUBEE Acrylic Riser Display Shelf for Amiibo Funko POP Figures, Cupcakes Stand for Table,Cabinet, Countertops - 3-Tier, Clear (12×8.75-2 Pack) https://www.amazon.com/dp/B07559P21F/ref=cm_sw_r_cp_api_-PyRBb7FCC5RP

I love those risers for Funkos and 6 inch. Detolf from ikea is a cheap ($60) option and looks great. The risers fit perfectly in there.

I guess it all boils down to what you’re collecting though.

I got them off of Amazon! The link is: NIUBEE 2 Pack Acrylic Riser Display Shelf for Amiibo Funko POP Figures, Cupcakes Stand for Table,Cabinet, Countertops - 3-Tier, Clear (12×8.75) https://www.amazon.com/dp/B07559P21F/ref=cm_sw_r_cp_api_i_Gn6nDbMH1Z0GX. They’re a little expensive but they have really maximized my space and I like the stage setup.

You should consider getting some risers so that way you can actually see the amiibos in the back of the crowd.

these are the ones I use

it's these: https://www.amazon.com/gp/product/B07559P21F/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1 . they fit nicely in the detolf!

Got them on Amazon. NIUBEE 2 Pack Acrylic Riser... https://www.amazon.com/dp/B07559P21F?ref=ppx_pop_mob_ap_share

It’s actually a mix, I’ve found that most of them on amazon probably come from the same place. The most current ones I’ve ordered though are these:

Acrylic Riser Display Shelf for Amiibo Funko POP Figures, Cupcakes Stand for Cabinet, Countertops - 3-Tier, Clear (12×8.75 - 2 Pack) https://www.amazon.com/dp/B07559P21F?ref=yo_pop_ma_swf

I got it on Amazon. Here’s a link :)

I would check out these risers. I use them to display figures a little smaller then amiibo and they look great.

It’s 2 Niubee acrylic risers. Got a 2-pack off Amazon. https://www.amazon.com/NIUBEE-Acrylic-Display-Cupcakes-Countertops/dp/B07559P21F

Theyre just acrylic risers from amazon: https://www.amazon.com/dp/B07559P21F/ref=cm_sw_r_cp_apa_i_uUOvCbDN52NZ4

Be cautious, they arent anything fancy, just plastic, so the leg in the back can sometimes break.

Thank you! Acrylic stands from amazon

The Detolf is great but not very suited for displaying small figures like Amiibos.
However these help them display much better.

HERE A little pricey but they are thick and sturdy. QuakeHold or something similar is a must since a tiny budge will have them all falling.

I ordered These off Amazon.

Thanks, these here: https://www.amazon.com/gp/product/B07559P21F/ref=ppx_yo_dt_b_asin_title_o05_s00?ie=UTF8&psc=1

Also not DIY, but I think these are great: https://www.amazon.com/gp/product/B07559P21F/ref=ppx_yo_dt_b_asin_title_o01__o00_s00?ie=UTF8&psc=1

​

You can fit 4 rows of 5 per shelf.

I have Detolfs and I buy these for three-step risers.

Here is a photo.

I also have this set of 3 individual risers. It looks like they're slightly bigger than the ones you linked.

Here is a photo.

Hope this helps!

And some risers too so you can see em all. Based on the amount of POPs you have lined up, I'd say to get this one. I use these but that's cause I have one of those cube organizers. Check out the customer images on both pages to get an idea of what to expect.

Thanks man that led me to a US one! Really appreciate it! I added the link for the US ones in case anyone else is curious!

https://www.amazon.com/dp/B07559P21F/?coliid=I3NTNNSTB2DZ89&colid=2V4RDTHW6HOJL&psc=0&ref_=lv_ov_lig_dp_it

Amazon

https://www.amazon.com/NIUBEE-Acrylic-Display-Cupcakes-Countertops/dp/B07559P21F/ref=sr_1_14?keywords=plastic+risers&qid=1558053849&s=gateway&sr=8-14

It’s this clear stand I found on amazon. NIUBEE Acrylic Riser Display

The best way to show off oob pops in my opinion.

Risers

these things
https://www.amazon.com/NIUBEE-Acrylic-Display-Cupcakes-Countertops/dp/B07559P21F/ref=sr_1_3?keywords=Acrylic+Riser+Display+Stand&qid=1564524251&s=gateway&sr=8-3

Here The picture is signed by Japanese Saber VA.

Thank you. These are them