Reddit Reddit reviews Noctua NF-F12 PWM, Premium Quiet Fan, 4-Pin (120mm, Brown)

We found 73 Reddit comments about Noctua NF-F12 PWM, Premium Quiet Fan, 4-Pin (120mm, Brown). Here are the top ones, ranked by their Reddit score.

Electronics
Computers & Accessories
Computer Case Fans
Computer Components
Internal Fans & Cooling Components
Computer Internal Components
Noctua NF-F12 PWM, Premium Quiet Fan, 4-Pin (120mm, Brown)
Premium quiet fan, 120x120x25 mm, 12V, 4-pin PWM, max. 1500 RPM, max. 22.4 dB(A), >150,000 h MTTFAward-winning 120x25mm fan with FocusdFlow frame for high static pressure and superior quiet cooling performanceIdeal for CPU heatsinks (e.g. Noctua NH-U12(S) series) and water cooling radiators, perfect replacement fan for loud all-in-one (AIO) coolers4-pin PWM version for automatic speed control via 4-pin PWM fan headers, broad 300-1500rpm speed range (1200rpm max. with supplied Low-Noise Adaptor)Includes anti-vibration mounts, fan screws, Low-Noise Adaptor, extension cable and y-cable for running two PWM fans on the same header
Check price on Amazon

73 Reddit comments about Noctua NF-F12 PWM, Premium Quiet Fan, 4-Pin (120mm, Brown):

u/Zear-0 · 7 pointsr/xboxone

Mine had a noisy fan out of the box so I just took it apart and replaced the fan with a nice noctua the same day This one

u/SirLazarus · 5 pointsr/buildapc

can I just switch the fan on my 212 evo with this noctua fan or any other 120mm noctua fans?

edit: follow up question, is it gonna be noticeably quieter ?

u/SluzzyGFX · 4 pointsr/Minecraft

Noctua NF-F12 PWM, Premium Quiet Fan, 4-Pin (120mm, Brown) https://www.amazon.com/dp/B00650P2ZC/ref=cm_sw_r_cp_apa_i_0RkRDbZTW6395

u/mi_stuff · 4 pointsr/pcmasterrace

Definitely the [Noctua NF-F12] (http://www.amazon.com/Noctua-NF-F12-PWM-Cooling-Fan/dp/B00650P2ZC) though mind the shitty color (pun intended)

u/LBriar · 4 pointsr/WeAreTheMusicMakers

So I'd do two things right off. Install some temperature monitoring software like hwmonitor or openhardwaremonitor (both are free and lightweight). Start it up, check your temps, then yank the fan (you can just disconnect the wire from the motherboard while it's running, no harm). Then watch the temperatures, preferably while you do audio stuff on the computer. It's entirely possible that the very loud fan is doing less for the temps than you think. It's also possible that that's not the fan making the noise.

If it is that fan and disconnecting it makes an unacceptable difference in temperature, Noctura makes very quiet 120mm fans for not a lot of money. Other common culprits would be GPU fans (almost always loud, and unnecessary in audio workstations) and sometimes CPU fans. If you're overclocking and the cpu fan is loud, go back to a stock clock and see if the fan gets quieter.

There's a lot to say about keeping PCs quiet, but that'd at least be a start. I'd definitely start with just yanking that fan and see what happens, might be you can get some peace and quiet for free.

If you want a quick and more expensive solution, check out Fractal Design cases. They're nicely soundproof with quiet fans and can be had fairly cheaply on sale.

u/pb278 · 4 pointsr/hardwareswap

$15 plus shipping is a bit high for the noctua fans when they are $20 and free shipping on Amazon and come with all the accessories. Just my 2c. GLWS

Noctua NF-F12 PWM Cooling Fan https://www.amazon.com/dp/B00650P2ZC/ref=cm_sw_r_cp_api_iuuTzbC8QFERD

u/Tylertooo · 2 pointsr/buildapc

Bearings: sleeved<fluid dynamic<magnetic (as corsair would have you believe) FDB is fine.

Static pressure is important when forcing air through a radiator or fin array. It's the amount of pressure the fan can overcome. Generally you want to replace a radiator fan with something that has the same or higher static pressure.

I'm not really a fan of Corsair fans. If you have 4 pin PWM fans, then get these: https://www.amazon.com/gp/product/B00650P2ZC/ref=oh_aui_detailpage_o03_s02?ie=UTF8&psc=1

By far the best fans available, imo.

u/White_Shade · 2 pointsr/hardwareswap

You can get them brand new on Amazon right now for $18.

u/zimork · 2 pointsr/buildapc

NF-F12 are Premium fans with rubber feet for reduced noise.

http://www.amazon.com/Noctua-NF-F12-PWM-Cooling-Fan/dp/B00650P2ZC

u/cecilkorik · 2 pointsr/pcmasterrace

Noctua makes lovely fans. What do you mean you "don't know which ones to get"? It should be pretty straightforward? Get one of the appropriate size, preferably with PWM if your motherboard supports it, and make sure it's the high-pressure fan designed for heatsinks rather than a high-airflow fan for case ventilation. Like this.

u/thejbone · 2 pointsr/pcmasterrace

Very nice but expensive fans ($20 a fan) but it includes a fan splitter and etc if you need more ports for fans on your motherboard.
www.amazon.com/Noctua-NF-F12-PWM-Cooling-Fan/dp/B00650P2ZC/ref=sr_1_1?s=pc&ie=UTF8&qid=1448996722

u/AfterShock · 2 pointsr/synology

Sure thing, I used 2x of these in my Synology.

u/Seriously_High_Guy · 2 pointsr/pcmasterrace

Sure bud, here is the cooler and here is the fan I put on the rad, completely optional but I'm certain makes a big difference in noise, as Noctuas are top end.

Also, here is the video tutorial for installation, an easy installation that takes a little over an hour if you have the right tools, but is pretty simple. Here is the tool set I used, and it gave me any size or fit that I needed to do this easily, plus is great if you ever do any computer customizing in general and need a nice set.

If you have any more questions feel free to ask.

u/rallymax · 2 pointsr/buildapc

I bought NF-F12. Do google though as I see people mentioning NF-A12x25 a lot and I haven't done research on various Noctua fan models.

u/Imnottheassman · 2 pointsr/buildapc

Yeah, I bought 3 of these 120mm fans, which are the same ones as come with the cooler. Honestly, it was probably a little overkill and two would have been fine. I’m by no means a pro at this, but I did a little research and figured it worth a little extra for super-quiet fans, and then read up on setting fan curves in bios. With these three fans (plus the cooler one) (two in, one out) I rarely get them above 40-50 percent speed while keeping case cool and very quiet.

Again, purely anecdotal, but has worked well for me.

u/DZCreeper · 2 pointsr/buildapc

All reference cards have the same PCB. Founders Edition means the reference PCB and also the stock cooler. Different pricing is just a result of how competitive a manufacturer wishes to be and how much profit the retailer wants.

That particular hybrid kit is meant for guaranteed compatibility with reference PCB cards.

That hybrid kit is terribly expensive. EVGA has gotten greedy, the pricing used to be $100 for a hybrid kit. I suggest making one yourself with off the shelf parts.

https://www.amazon.com/gp/product/B00650P2ZC - Upgraded radiator fan.

https://www.amazon.com/Kraken-Matte-Cooling-Black-RL-KRG12-B1/dp/B06ZYHRMYP - AIO Mounting bracket.

https://www.amazon.com/Corsair-Hydro-Quiet-Liquid-Cooler/dp/B009VV56TY - Cheap 120mm AIO.

https://www.amazon.com/Noctua-NT-H1-Thermal-Compound-Retail/dp/B002CQU14A - Good thermal paste.

Pair those 4 things with a cheap reference PCB card. I suggest EVGA is they are quite generous in regards to warranty support for cards with cooler swaps.

https://pcpartpicker.com/product/tgyxFT/evga-geforce-gtx-1080-ti-11gb-founder-edition-video-card-11g-p4-6390-kr


u/1-21Gigawatts · 2 pointsr/buildapc

Everyone seems to love the Noctua NF-F12 PWMs. They're silent, resilient and powerful. Not very cheap (for fans) though, and if you don't like brown, the differently-colored variants are a bit more expensive I believe.

u/lennoxonnell · 2 pointsr/pcmasterrace

Noctua is probably the best for silence.

NF-F12

NF-A14

They'll provide great cooling at very low RPMs, which render them virtually inaudible.

Edit: I can't provide any input into corsairs fans as i don't own them, but after owning [noctuas] for a while, the color scheme doesn't bother me one bit when i get confused if my system is even powered on :p. Gotta get close and listen for the harddisk.

u/strunberg · 1 pointr/buildapc

Would Noctua NF-F12 PWM in a push-pull config be enough for 16 fins per inch or should I use a radiator that uses 10 fins per inch?

https://www.amazon.com/gp/product/B00650P2ZC/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

u/bendvis · 1 pointr/buildapc

Idle temps are very rarely something to worry about. Load temps are what matter.

That said, my stock-clocked 4790k under an H100i is idling around 28C right now, and rarely breaks 60C under load, but I've got Noctua NF-F12 PWMs on it.

u/Draw_Man · 1 pointr/pcmasterrace

Thanks all, I think I'm going to go with the halos (From u/Thx_And_Bye ) with a Noctua fan (xIISuSpEcTIIx and moots27)

u/jor_c · 1 pointr/buildapc

Makes perfect sense.
Thanks a lot.

If i were to rotate the cpu cooler, would i have to reapply thermal paste, or should it still be good? (built on friday).

Also would this fan work?
https://www.amazon.ca/gp/product/B00650P2ZC/ref=ox_sc_act_title_1?smid=A1Z5H6ZGWCMTNX&psc=1
Or
https://www.amazon.ca/dp/B01LHYI374/?tag=pcp0f-20&th=1

I may start off by only buying one then a second one at a later time. If i do that, would you recommend me placing it at the top red arrow or the bottom red arrow.

Thanks a lot friedmn!

u/milkmanjim · 1 pointr/techsupport

Glad I helped.

Your temperatures seem to be completely safe. 71 degrees is absolutely fine for your components, and you shouldn't worry about it. You should only be concerned if temperatures start exceeding 75-80 degrees.

As /u/Dyzleksi suggested, you could move the PC out of the furniture if you have room. This most likely will make the PC slightly cooler, and therefore a little quieter. If you want to make a huge difference to noise and heat, there are many options for cheap but quality fans:

You should start with a CPU cooler like this. This is one of the most popular ones on the market, I have one myself and it is silent.

Any aftermarket case fans will typically do the job much more effectively and quietly. Noctua is a good choice, as is Corsair. If you aren't willing to spend that much, cheaper options will also be a large improvement.

Bear in mind that case fans greatly affect overall performance. How many case fans do you currently have? (These are the fans attached to the case itself, not to components.) Most cheaper cases come with only 1 fan on the front (intake). You should install at least 1 more on the rear or top of the case as exhaust, for a total of 1 intake and 1 exhaust fan.

Grounding should not affect the temperatures or cooling at all. It is a precaution you can take while handling the components to avoid damaging them with static electricity. Many people (myself included) do not bother with grounding and get on just fine. In future, though, you should tap a metal object such as the side panel of the PC before touching any hardware.

If you have any more questions, I'm always here to help.

u/my_dog_is_cool · 1 pointr/hardwareswap

F12s are $22.39 shipped on amazon

http://www.amazon.com/Noctua-NF-F12-PWM-Cooling-Fan/dp/B00650P2ZC

I was caught off guard too when I put mine up for sale

u/kainoasmith · 1 pointr/buildapc

I personally went with a pair of noctua nf-f12, but if you're willing to spend an extra 40 dollars then the Corsair SP120 is another very popular choice

u/Tsukino_Stareine · 1 pointr/buildapc

ehhh dont buy cheap fans, after a year they'll start rattling and driving you crazy.

I have these in my case and they are super quiet and my internal temps dropped 4C after putting them in so they definitely work

u/firstpc13 · 1 pointr/buildapc

Is that fan better than https://www.amazon.com/dp/B00F6S0XJO/?tag=pcpapi-20&th=1 this pack of two? Should I just get that pack or should I get two of the Noctua ones? Oh and how is that fan compared to this one https://www.amazon.com/dp/B00650P2ZC/?tag=pcpapi-20

u/hackoon · 1 pointr/homelab

I think you're looking for something like this.

u/SSGryffindor · 1 pointr/buildapc

Were you being serious about noctua nf-f12 being expensive?

They're on sale on Amazon for $20.

If they really are the best how many would I want to have in my pc if I'm overclocking an r9 390 running a 1440p monitor.

Noctua NF-F12 PWM Cooling Fan https://www.amazon.com/dp/B00650P2ZC/ref=cm_sw_r_cp_awd_IFbHwb76AH0VF

Maybe I'm confused. Are case fans not as good as cooling fans?

u/PonkyBreaksYourPC · 1 pointr/pcmasterrace

Urgh that post was a mess lol, here is a cleaned up version

http://www.amazon.com/Noctua-NF-F12-PWM-Cooling-Fan/dp/B00650P2ZC

2 of them in the front

http://www.amazon.com/Setting-Anti-Stall-Bearing-NF-S12A-FLX/dp/B00BEZKX8Y/ref=sr_1_2?s=pc&ie=UTF8&qid=1451758087&sr=1-2&keywords=Noctua+NF-S12A

1 of them in the back.

You may need to plug one of the NF F12s into the CPU fan header, but only do that if the bios has user fan control or else it will speed up and slow down thinking it's attached to the CPU cooler.

If it doesn't, just plug it into the 3 pin on the motherboard. If they are too loud, use the low noise adapters that come with them. The S12A won't be loud, but on max speed the NF F12s could be a little loud, not that bad but they are pretty fast on max speed as they are aimed for use on radiators normally, but they are great in restricted openings too and their performance to noise ratio is excellent.




u/Hackronym · 1 pointr/buildapc

The problem is there is always going to be a tradeoff. If a fan is spinning fast (or has the capacity to) it will generally be louder than a small, slow speed fan. That being said, for airflow vs noise, this one is the best Noctua one that you could replace it with.

I mean, the one on the Hyper212 goes from 9 - 36 decibels between 600 & 2,000 rpm. The Noctua fan goes from 18.6 - 22.4 decibels between 300 & 1500 rpm. The airflow between the two is 24.9 – 82.9 CFM on the 212 and 43.7 - 55.0 CFM respectively. So the Noctua fan has a much tighter range on the noise level and airflow, but it doesn't have a higher spin on it.

I don't know man, it's hard to recommend for air coolers because they are always going to be noisy, there is no sugar coating it.

u/Polaris2246 · 1 pointr/unRAID

My buddy and I each built unraid servers in the past month. He went higher specs with a Xeon e3-1250v3 and a higher end consumer motherboard. Hes going to get an AMD rx480 video card for it so he has a second gaming computer for anyone that comes over. 16 gigs of ecc RAM. I went more power efficient and bought a supermicro board with an Intel Avalon C2750 CPU. It's essentially a server Atom CPU. It uses 20watts and has eight cores and 16 gigs of ecc RAM too. The motherboard has the right features I wanted. ipmi built in, four nics and some other stuff. I was worried the CPU would be under powered by it packs plenty of power for my docker containers. Sonarr for auto TV downloading, couch potato, nextcloud server, web server, MySQL server, modded Minecraft server, crash plan backup server, and others. I barely eat up 30% CPU when everything is running and actually doing something. Idle is below 5%. I don't have Plex on it because my Nvidia shield does that. It's surprised me a lot how much power it has. If you want gaming, it's not for you but it is more than enough as a file server and the applications its running and plenty more.

Motherboard/CPU

16GB RAM

SATA Controller Card (needed more sata ports than motherboard had)

Power Supply

[2x SSD for Cache/Pool set up]
(https://www.amazon.com/gp/product/B01FJ4UN76/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1)

5x WD Red 3TB

Better fans for case

Case (LOVE the case)

u/fishbelt · 1 pointr/buildapc

Hmm, well the case is only going to be as quiet as the loudest fan and then some. If I bought the splitter I wouldn't pay much more for another fan, so probably another cheap fan like this.

But I'd prob not even bother and buy one PWM fan since the performance is near identical to two fans.

Edit: link to noctua fan $$

u/tomkatt · 1 pointr/overclocking

> I didn't have the faster speed on the back fan when testing, but I don't think it would make a massive difference.

You'd be surprised. I had a voltage limiter on my 200mm front fan to keep it at 500RPM, and removing that so it bumped to 800RPM brought my temps down by a few degrees.

Edit - also, stock case fans tend to be kind of cheap. I like to replace any stock fans with Noctua PWM fans. They're a little pricier than other case fans, but they use really good bearings so are really quiet even running at high RPMs, and tend to push more airflow CFM than other cheaper fans.

u/DaLegendaryNewb · 1 pointr/pcmasterrace

The Noctua NF-12 is the fan I see most recommended

u/Nc1107 · 1 pointr/axolotls

here's one of the fans to begin your search, focus on higher rpms and the lowest db so you don't hear it because it's gonna be on 247
the brand is more expensive but they are worth it



Noctua NF-F12 PWM, Premium Quiet Fan, 4-Pin (120mm, Brown) https://www.amazon.com/dp/B00650P2ZC/ref=cm_sw_r_cp_apa_i_fxnQDbEFMJGA

u/workrate · 1 pointr/buildapc

Honestly I could be bad at adding paste. I've not had to apply thermal paste in years. The last two PCs i built just used the stock cooler which had the paste already applied.

the radiator is attached to a fan on the front of the pc, middle fan. This is the fan attached to the radiator:
https://www.amazon.com/Noctua-NF-F12-PWM-Cooling-Fan/dp/B00650P2ZC

u/krunchybacon · 1 pointr/buildapc

There's a few things, first of all Intel K series cpu's don't come with a cooler in the box, so you will need one. A good (but pricey) cpu cooler is the Noctua NH-D15. If you would like something more affordable the Cryorig H7 will work, although the temps will be higher than the former.

Yes, all desktop ram will fit into all desktop motherboards (sodimm or laptop ram will not).

The hard drive you selected doesen't have great reviews, for $8 more you can get a [WD Blue](https://www.amazon.com/Blue-Cache-Desktop-Drive-WD10EZEX/dp/B0088PUEPK

/ref=sr_1_1?s=electronics&ie=UTF8&qid=1537074431&sr=1-1&keywords=western+digital+-+caviar+blue+1tb+3.5%22+7200rpm+internal+hard+drive) or a Seagate Barracudda, both more reputable.

The cases you linked are good for their price, but you will most likely need 1-2 more case fans as they only come with 1. If you would like some cheap fans these will do, but they wont be as good as something like the Noctua NF-F12

Dont worry about asking questions! It's what we are here for :) I'm sure I missed something, so if you have any other questions make sure to ask!

Edit 1: Do you already have windows? If not make sure to but it, as you wont have an Operation System without it (Unless you want to run linux).








u/machinehead933 · 1 pointr/buildapc

Noctua NF-F12 are pretty much top of the line

u/Relating · 1 pointr/pcmasterrace

Phantom 410.. Probably the 240 I think? If so I had that case. Yeah with phantom that's the only way you only have one fan in front but the front fan doesn't do much other than cool the hard drive bays imo if you removed some of those bottom bays it'd let cool air go into the case more. H100i fan was loud af in my (410).

Yeah also change out corsair imo the stock are alright but!
https://www.amazon.com/Noctua-NF-F12-PWM-Cooling-Fan/dp/B00650P2ZC and the cables that come with it limit the rpm to 3 different levels depending on how loud you want them and these are for radiators because they push more air than the other and much more quiet. If you don't care about rgb you can replace all other with 140mm and 120mm quiet editions noctua. If you want rgb for the others I recommend thermaltake riing fans (quiet edition) actually doesn't matter because if I remember they are all 4 pin so you can adjust in bios


Or

https://www.amazon.com/gp/aw/d/B00KG8K5CY/ref=pd_aw_fbt_147_img_3?ie=UTF8&psc=1&refRID=4WJBQAR06PMYQFMBRPGX

You could try these cables to the fans and they will lower the rpm depending on which one you use so it's not as loud. If it's the 410 there should be the fan controller on top if it's the 240

u/willster191 · 1 pointr/buildapc
u/noreasontohate · 1 pointr/FL_Studio

Check out this PC case It's not a fancy RGB case but it has a dampening material inside that helps with noise. I also recommend getting these fans to help with reduced noise.

u/PaulVB6 · 1 pointr/techsupport

I see. So those little quick snap things are actually removable from the fan. They're held in with screws that go into the fan itself. I'm familair with this cooler and you can get pretty much any 120mm fan and it should work fine.


if you want a recommendation for a replacement fan, i'd suggest a Noctua NF-F12. Theyre well known for being super high quality, quiet, and deliver solid airflow. they're a bit pricey but imo they are worth it

u/Ryoshien · 1 pointr/buildapc

Noctua NF-F12 PWM Cooling Fan https://www.amazon.com/dp/B00650P2ZC/ref=cm_sw_r_cp_apa_Oos3Ab3SE3TZJ has been ordered for the 80mm replacement. Thanks for the info and assistance men! Now time to figute out why my rig restarts once a day XD

u/johnny_ringo · 1 pointr/buildapc

Just went through this. Grab 2 Noctua NF-F12 PWM Cooling Fan https://www.amazon.com/dp/B00650P2ZC/ref=cm_sw_r_cp_apa_wrxWAb88ER7SC

It turns a grindy noisy kit into a proper silent an cool one. It's shockingly better.

I went through the RMA but ordered them while it took long to get approved. Won't bother sending in the old shit now.

Do it and thank me later

u/crimson117 · 1 pointr/buildapc

Motherboard: If you're worried, just grab an x570 and save the stress.

Cooler: I'd keep the h100i and replace the noisy fans with 2x Noctua-NF-F12: https://www.amazon.com/Noctua-NF-F12-PWM-4-Pin-Premium/dp/B00650P2ZC

u/Kedoki-Senpai · 1 pointr/buildapc

https://www.amazon.com/Noctua-NF-F12-PWM-4-Pin-Premium/dp/B00650P2ZC

I say that 2 case fans minimum is usually good enough and anything more than that is better for performance but not mandatory.

u/_jax · 1 pointr/buildapc

You could aways save it and use it for steam games or maybe get a better keyboard, mouse or second monitor. You could also get a couple more Noctua fans (http://www.amazon.com/dp/B00650P2ZC/?tag=pcpapi-20) to replace the case fans and make your build quieter.

u/dwellufool · 1 pointr/buildapc

it's not necessary, but it does contribute to a cooler system. just pick up a $20 120mm when you get the chance to put at the front. not a necessary piece

edit: here's one i see used a lot

Also oc = overclock, which can raise temps

u/BKachur · 1 pointr/buildapc

I'll second Noctura Really great fans. Hate the color scheme though.

u/atomiku121 · 1 pointr/pcmasterrace

http://www.amazon.com/Noctua-NF-F12-PWM-Cooling-Fan/dp/B00650P2ZC/ref=sr_1_1?ie=UTF8&qid=1462504864&sr=8-1&keywords=nf-f12

Check your prices, brother. This fan here is literally exactly the same as mine (less the limited edition color scheme) and they cost $20 with prime shipping.

u/tomabbott99 · 1 pointr/techsupport

If you have fan controllers in your case you probably need PWM controllable fans, molex powered fans are usually useless and I'd suggest you get some Noctua fans https://www.amazon.co.uk/Noctua-NF-F12PWM-Case-Fan-120/dp/B00650P2ZC/ref=sr_1_1?ie=UTF8&qid=1464621022&sr=8-1&keywords=noctua


You can also use noctua low noise adapters http://noctua.at/en/na-src7.html

These connect to the fan header and fan and reduce the current by increasing the resistance between your fan and power supply for it (weather that is your motherboard or some fan controller).


u/SapphireDestiny · 1 pointr/computers

Be sure to update your BIOS before you swap out the CPU, which can be found here: https://www.dell.com/support/home/us/en/04/product-support/product/vostro-410/drivers

PSU: https://www.amazon.com/EVGA-WHITE-Warranty-Supply-100-W1-0500-KR/dp/B00H33SFJU/ref=sr_1_4?keywords=evga+PSU&qid=1565767187&s=gateway&sr=8-4

RAM: Get two (total 8GB) https://www.amazon.com/PC2-6400-DESKTOP-Modules-240-pin-Tech/dp/B00C5378J6/ref=sxin_3_ac_d_pm?ac_md=2-0-VW5kZXIgJDI1-ac_d_pm&keywords=ddr2+ram+8gb&pd_rd_i=B00C5378J6&pd_rd_r=c0152c74-5d0e-41a6-b25e-9c85c9ff097d&pd_rd_w=2llFc&pd_rd_wg=1pcZu&pf_rd_p=443560ff-1213-4884-9e43-6946f940cec1&pf_rd_r=7KJSE3EX29M0YW9VJKFW&psc=1&qid=1565770206&s=gateway

CPU: https://www.amazon.com/Intel-Q9400-Processor-U36011-Category/dp/B001DEWO9W/ref=sr_1_10?keywords=core+2+quad&qid=1565767573&s=gateway&sr=8-10

SSD: https://www.amazon.com/Kingston-480GB-Solid-SA400S37-480G/dp/B01N0TQPQB/ref=sr_1_9?keywords=512gb+ssd&qid=1565767984&s=gateway&sr=8-9

GPU: https://www.amazon.com/GIGABYTE-GeForce-Graphics-Windforce-Gv-N1650OC-4GD/dp/B07QHGKC2D/ref=sr_1_3?keywords=gtx+1650&qid=1565768280&s=gateway&sr=8-3

Wireless: https://www.amazon.com/ASUS-PCE-AC56-Wireless-Express-Adapter/dp/B00JNA337K/ref=sr_1_4?keywords=wireless+card+PCIE&qid=1565768847&s=gateway&sr=8-4

I think the cooler is proprietary. The original should be able to cool the CPU though. Im talking a guess that the case fan is 120mm and the CPU is 92mm. Might have to ask around about the heatsink.

Fan, case: https://www.amazon.com/Noctua-NF-F12-PWM-4-Pin-Premium/dp/B00650P2ZC/ref=sr_1_5?keywords=noctua+120mm&qid=1565769226&s=gateway&sr=8-5

Fan, CPU: https://www.amazon.com/Noctua-NF-A9-PWM-Premium-Cooling/dp/B00RUZ059O/ref=sr_1_3?keywords=noctua+92mm&qid=1565769286&s=gateway&sr=8-3

Bam. Just got yourself a decent gaming rig.

Total cost: About $415

u/jbourne0129 · 1 pointr/overclocking

There should only be one NF-F12.

Not the IIPC or whatever just "nf-f12 period"

Here is the link

u/theotherdanlynch · 1 pointr/buildapc

I just installed a Master Liquid Pro and it was very quiet, so apparently there a big difference between that and the Lite version. Are you talking about fan noise or pump noise? If it's pump noise, you'll have to replace it, but if you're talking about fan noise, just replace the fan. You can get a great, pressure optimized fan like the Noctua NF-F12 PWM for $20.

u/MrHero23 · 1 pointr/pcmasterrace

something like this?

Also can i wrap the edges it with electrical tape?

u/routebeer · 1 pointr/buildapc

Hi all, just finished putting together my build and I wanted advice on optimal fan placement.

So far, I am using the case fan (in the front, it pulls air in), my heatsink on the CPU, which seems to draw air in and towards the rear of the case, and a fan in the back, blowing outwards (my thoughts are that this would continue the flow of hot air out of the case. Is my thinking right?

I was also thinking of buying an extra fan or two (Noctua NF-F12) but not sure on where to place them. Should I put them at the top of my case pulling air in? Or at the bottom (by the PSU) pushing air up?

u/SilentWalrus1 · 1 pointr/hardwareswap

I've got a brand new Noctua 120mm pwm fan

Link here.

Looking for $15 shipped.

u/agoia · 0 pointsr/bestof

I've had good luck with Cougar fans. I have one of these that is old enough to be included in the 4 year old linked post and it is still awesome.

Noctua fans are often regarded as the gold standard but there are differences in the kinds of fans they offer so it can be more confusing to pick one and generally more expensive for them. Their comparison to the Cougar I linked would probably be this