Reddit reviews Oster Dog Rake and Shedding Brush, 18-Tooth Coarse, Wide (078928-300-000)
We found 21 Reddit comments about Oster Dog Rake and Shedding Brush, 18-Tooth Coarse, Wide (078928-300-000). Here are the top ones, ranked by their Reddit score.
Good for cats or dogsSturdy, well-made toolHelps remove the dry undercoatGreat for Terriers, Spaniels and SettersWorks best on medium breeds
Just the obvious, even it and wait until it grows back.
Regarding the sheltie summer trim question, you aren't really supposed to trim their coats, the hair protects them from overheating and getting sunburns, is my understanding.
I have used undercoat rakes with great success on my shelties though, have you tried those?
I have used this one on Amazon. I use it after I bathe my dogs, once their coat is dry. The warm water is supposed to loosen the undercoat, so the undercoat rake will take more out. One year I swear I had enough fur to make another dog, and my female with the thickest coat looked like she lost 10 pounds after I finished. Of course it took an hour.
It's called an undercoat rake.. I made this video for OP after he (or she) asked for a comparison between the rake and a furminator:
https://www.youtube.com/watch?v=SGbdNySlfQk
Here is the pictured rake: http://www.amazon.com/Oster-Professional-Grooming-Undercoat-Coarse/dp/B00061MWJ0
They really don't need to be cut. All that fur is important to them, especially during the summer because of insects and sunburn. You just need to spend some time cleaning out the undercoat. You want to use something like a 'undercoat grooming' rake. This will take quite a bit of time. After this you'll want to do just go back over with a slicker brush/or comb.
If your dog has mats (mine get mats around flanks) then you'll want to apply some dematting spray and then use a dematting comb.
This will help a lot in keeping your derglet cool.
Trimming around flanks, ears, etc is fine. I get my dogs butt flanks trimmed a lot because poop.
I find that a fur rake works better and is cheaper, I've used them on Golden Retrievers, Labrador Retrievers and Huskies to great success.
If you get one and it grows to look this this: https://imgur.com/a/lDzIvUj
Then this is your friend: https://www.amazon.com/Oster-18-Tooth-Coarse-Shedding-Brush/dp/B00061MWJ0
Light brush (5-10 mins) a night keeps on top of everything.
We know a few others and they all seem to be very social animals - love family and other dogs.
Coat King and a nice metal dog comb works great. Oster brand makes a good coat rake sold on amazon for a decent price https://www.amazon.com/dp/B00061MWJ0/ref=cm_sw_r_cp_api_i_GNLBDbY3WNHMG
The furminator tends to rip healthy hair out.
Link to the rake
From what I gather, they are more meant for short coated breeds and they cut hair as they comb and often end up damaging the top layer.
The rake breaks up tangles and dense patches in the undercoat and removes the loose bits, while allowing the flowing topcoat to pass through unharmed.
Happy for you and the dog!
First, buy one of these:
http://www.petco.com/product/100491/KONG-Zoom-Groom-Brush.aspx (Amazon is cheaper)
and one of these: http://www.amazon.com/Oster-Professional-Grooming-Undercoat-Coarse/dp/B00061MWJ0
These will help with the shedding. It's a lot. Adding salmon oil to her food can also help (talk to a vet first). And yes, she will certainly be able to learn a new name! It took my guy about a day. Your mileage may vary.
Finally, shameless plugs for r/germanshepherds and r/GermanShepherd. Lots of helpful people. Best of luck!
http://www.amazon.ca/Oster-Professional-Grooming-Undercoat-Coarse/dp/B00061MWJ0
And I bought one of their dual sided brushes as well.
Furminators really are great! On the right coat type. Depending on the coat an undercoat rake may work better. This one by Oster is AMAZING http://www.amazon.com/Oster-Professional-Grooming-Undercoat-Coarse/dp/B00061MWJ0. Rubber curry brushes, like Zoom Groom by Kong, are great for getting the top coat on both double coated and smooth coated dogs. Don't forget a slicker brush and steel comb (for long/double coats)! I have a cavalier and you wouldn't believe the amount he sheds. I use a combination of all these tools for the best results. I'm also a groomer, so I'm a little anal with it.
Heres the link: Oster Dog Rake and Shedding Brush, 18-Tooth Coarse, Wide (078928-300-000) https://www.amazon.com/dp/B00061MWJ0/ref=cm_sw_r_cp_apa_i_THd1Cb7T5B6T1
Would you suggest a rake over a pin brush for under coat then? And do you have any advice for brushing out spots the dog is sensitive to?
Amazon
Hi, CaptainAre! Quality grooming tools make all the difference. I personally took other peoples' advice and use a FURminator during shedding season. It works great and gets the job done relatively quickly, is very efficient, and leaves my Husky with a soft top coat. Other people also swear by the Oster Rake, but I have yet to try it. I've owned a shedding blade in the past and used to use it on my other dogs, however I've noticed that while it might work on other breeds with thinner coats, it's not necessarily the best tool to use on a Husky. Will it work? Yes, but it's the equivalent to hammering a nail in with a wrench. Quality grooming tools are worth their weight in gold, especially with a Husky's thick undercoat.
Also, from my understanding, all brushes/blades/rakes were designed to be used along the grain of the fur and not against it. The best comparison I could think of would be shaving a beard. Sure, you could get a closer shave if you go against the hairs but it comes at the price of mild discomfort. Same thing goes for a dog's coat.
Another invaluable tool for daily maintenance and upkeep of her coat would be a decent Slicker Brush. Hope this helps!
We use a furminator too, and while it works, we really have to go to town to get all the undercoat off and it seems like it just rips his top coat apart in the process. I was thinking of getting one of the undercoat brushes to see if that was any better.
Anyone have any experience with something like this?
http://www.amazon.com/dp/B00061MWJ0/
I use a Mars Coat King on my Pyr; this Oster undercoat rake is also good, it just doesn't have replaceable blades like the Coat King does. Undercoat rakes work really well to get out that undercoat while they're blowing it, without cutting the long top guard hair. I don't care for Furminators, which tend to have tines which are far too short to really get into a Pyrenees undercoat, and will instead pull and break the guard hair. You need to comb the rake with the direction of the coat, and it will help tremendously. It's what my mobile groomer guy uses on mine, and I keep one on hand to run through her coat about mid-way between grooming sessions.
Pin/Slicker brushes are sometimes not terribly effective on Pyr coats - some dogs have a super thick undercoat, and for those cases, a greyhound comb is usually a little better for a weekly brush session.
Something like this?
Oster Professional Pet Grooming Undercoat Rake, 18 Teeth Wide, Coarse https://www.amazon.com/dp/B00061MWJ0/ref=cm_sw_r_cp_apa_NezuybJYSQMCD
Well I'm in no way a dog expert hah. I would seek out any local trainers/behaviorist in your area. With the shedding problem though a good weekly run down with a rake would help tremendously. I use this one:
Oster Professional Pet Grooming Undercoat Rake, 18 Teeth Wide, Coarse https://www.amazon.com/dp/B00061MWJ0/ref=cm_sw_r_cp_awd_chUBwbKD1SYTC
It does an amazing job of pulling out the thick undercoat while leaving the top coat (the guard hairs) untouched. The thick undercoat is the culprit of all the masses of hair you see around the house, while the guard coat is very important to the dogs temperature regulation. You never want to shave, trim, or use a furminator on a double coated dog. It will do more harm than good.
As for the food aggression I would google some tips or seek out a professional. Sorry I couldn't be more help!
My favorite is the Oster undercoat rake. Its very efficient and my dog loves being brushed with it. I have a slicker brush and FURminator and they're both decent, but they are more time-consuming and my dog has mixed feelings about being groomed with them.
WOW! so much great info! exactly what I was looking for! So you would recommend the DIY self service > PetSmart Furminator package?
Thanks for getting me the info while on mobile, i looked at furminator brush but thought that cant be the only thing i need, and couldn't find a specific grooming source this was super helpful. I will look into both DIY & Furminator.
Just to make sure i got the DIY procedure down:
Thanks for the help! seems like DIY could cost me about ~$50-60. I just thought it would cost more for the tools they had in this grooming pyranees video
A large part of grooming is personal preference. They have outdoorsy coats that don't require frequent maintenance. Some Aussies coats are sort of water and dirt resistant (not to say they won't get dirty but rather it flakes off easily without your personal intervention).
I primarily focus on reducing the quantity of hair balls in my house. This take brush was suggested by a fellow member of this subreddit. Aside from that I trim the excess dirt between their paws and underneath it once in a blue moon.
http://www.amazon.com/Oster-Professional-Grooming-Undercoat-Coarse/dp/B00061MWJ0
http://i.imgur.com/vnw0QJ2.jpg
When my wooly Mally is blowing her coat, it is a multi-step process. Step one is using a slicker brush like /u/blounsbury linked - that helps get rid of most of the loose fur. I then move on to a rake style undercoat brush, often in conjunction with a de-matting rake. That will get the bulk of the undercoat out. The second to last step is using a metal comb to make sure all of the undercoat "chunks" are out. The final step is going over with the slicker brush for the final time.
Understand that this is a multi-day event. While the sound of "blowing the coat" sounds like something that should just suddenly happen, it takes place over a week or so. I measure my Mally's fur output in cats. Day one is usually one cat-sized lump of fur. Day two is like three. By day 3 and 4, we're usually down to a cat a day.
My Shiba uses one brush for his entire grooming process when he's blowing his coat - The Furminator. It does zip for a wooly Malamute (even the long-haired version does nothing).