Reddit reviews Palm Pre Original Smart Phone AC USB Wall Adapter + Original Palm PRE Charging USB 2.0 Data Cable

Yes.

I followed a guide to install the palm pre's inductive charger. I bought 2 (and I'm going to get a third) touchstone. They're on amazon for about 6 bucks a pop. I installed the pre inductive coil on the Gnex and got that all working.

Then I picked up 10 NFC Tag stickers. These are programmable. I stuck the stickers on the touchstones and programmed them for different actions. The touchstone by my bed automatically sets my phone into quiet mode and displays an lcd clock. I haven't installed one of the touchstones in my car yet but that one will connect to the bluetooth and fire up the gps.

I also keep an nfc tag in my wallet as well. That sets my phone back to all default settings (brightness, volume, etc). Touch the wallet and you're back to normal. I've been thinking about sticking them on my credit cards and having them launch money tracking software. That way every time I swipe a card I can enter notes on my purchases.

Here are some relevant links:

http://forums.androidcentral.com/verizon-galaxy-nexus-accessories/147840-guide-galaxy-nexus-mod-palm-touchstone-without-soldering.html

http://www.amazon.com/Palm-Touchstone-Charging-Dock-Pre/dp/B002CMEIWK/ref=sr_1_cc_1?s=aps&ie=UTF8&qid=1330652247&sr=1-1-catcorr

http://www.amazon.com/Palm-Pre-Touchstone-Back-Cover/dp/B002UNKGMC/ref=sr_1_1?s=wireless&ie=UTF8&qid=1330652283&sr=1-1

http://www.amazon.com/Palm-Original-Smart-Adapter-Charging/dp/B002ITKQKU/ref=pd_bxgy_cps_img_c

http://www.amazon.com/Mifare-Ultralight-Tags-Galaxy-Nexus/dp/B006SMFPUO/ref=sr_1_1?ie=UTF8&qid=1330652230&sr=8-1

Ya, np. I can tell you, I got all my materials from Amazon. The guide will mention copper conductive tape, most commonly associated with guitar repair. However, if you order this "guitar repair" tape it's marked up. I used Slug Tape and it works just fine for a lot less money.

In fact here's the rest of the mats:

Pre Back

Touchstone

Wall adapter -- though any should work fine I just didn't have spares and it's <$5

Soldering Iron -- I didn't have one

Guitar Picks if you lack enough -- I used about 6-8 popping the bezel

If you don't already have extended battery and cover

The only thing I didn't buy off Amazon were the magnets. I picked mine up from K&J Magnetics. Go for any of the disc type that are 1/32" thick. I think I got a pack of ten for a little over a dollar, and I believe each is rated for about 0.4lbs of force, more than enough.

It took me about 2 hours to finish the project, but read through the whole thing first, don't just wing it, and make sure you're comortable with popping the glass out of the bezel and soldering on your device. For what's it's worth this was the first time I've ever soldered, and it went better than expected. I practiced making little weld dolops for about 5 minutes before I trusted myself on the back of the device. Good luck!

http://www.amazon.com/Palm-Original-Smart-Adapter-Charging/dp/B002ITKQKU

Quality charger with a nice form factor that never got popular enough that people bothered making fakes.

The related TouchPad charger is the won in an online comparison:
http://www.righto.com/2012/10/a-dozen-usb-chargers-in-lab-apple-is.html

The HP Touchpad ones are supposed to be the best. Here's one that I believe is the same thing but I may be mistaken. It looks the same except for the Palm logo. Says they're OEM too: http://www.amazon.com/gp/aw/d/B002ITKQKU/ref=mp_s_a_1_6?qid=1452142553&sr=8-6&pi=AC_SX236_SY340_FMwebp_QL65&keywords=hp+touchpad+charger&dpPl=1&dpID=41Nc5cNZzeL&ref=plSrch