Reddit reviews Panlong 8-Way AV Switch RCA Switcher 8 in 1 Out Composite Video L/R Audio Selector Box for DVD STB Game Consoles
We found 31 Reddit comments about Panlong 8-Way AV Switch RCA Switcher 8 in 1 Out Composite Video L/R Audio Selector Box for DVD STB Game Consoles. Here are the top ones, ranked by their Reddit score.
8-way AV RCA Audio Video Switcher Selector for XBOX DVD PS2 PS3 Wii Cable Box to TVMechanical design, simple push-button switchingMetal enclosure, excellent stability and longevityEasy installation and operation, no extra power supply or software drive neededSupport devices with A/V connection, provide clean video and audio
There's a couple third party hardware pieces that are basically an array of inputs and you physically "switch" to the one you want being sent to the TV. Thankfully there aren't many that use HDMI so we avoid having to figure that out (though I'm sure there are solutions).
I think the one he uses is this: https://www.amazon.com/Panlong-Switcher-Composite-Selector-Consoles/dp/B00KXVBB7C
Very nice!
As your retro system collection grows, I suggest picking up an AV RCA switcher box:
Panlong 8-Way AV Switch RCA Switcher 8 in 1 Out Composite Video L/R Audio Selector Box for DVD STB Game Consoles https://www.amazon.com/dp/B00KXVBB7C/ref=cm_sw_r_cp_tai_EGF3Db2BSMQ8J
It's a Sony PVM 20L2, technically I think it's a 19 inch, but the model number implies 20 inch and that's what everyone lists them as. Although it does seem a tiny bit smaller than my old 20 inch Trinitron it replaced. I'll measure them later and find out for sure.
The cables are a bit of a mess right now, going from my old CRT with SCART -> Converter Box -> Component -> CRT to this setup changed around some stuff, but once I clean everything up I planned on doing a full "Gameroom" post featuring all the shelves and stuff. I'll take a few photos of the cables as well. :)
But, basically for the RGB connected stuff (SNES, Sega, PS1 and PS2) they start with these cables from the console to the Switch:
This is the SCART Selector switch I use, works like a champ. Switches automatically. I love this thing to death.
From there, it goes out a generic (Male) SCART -> (Male) SCART (Used as an extension cable basically)
Then, into this (Female) SCART -> BNC connector
Then finally, into the Sony PVM CRT.
For audio, I just use a Stereo Jack -> RCA cable off the selector switch into my little cheapo 2.1 sound system (This PVMs don't have stereo sound).
Everything else is running off composite right now (Yellow Red White RCA connectors), going into a RCA switch and into the Sony PVM
Composite -> BNC adapters for the video signal
The composite switch I use.
Audio is the same story as above, just goes from the switch into the cheapo 2.1 system directly. So I pretty much don't use the PVM's speakers.
I used to use Y adapter (two female ends, one male) but now I just switch the RCA connectors out for the console I am using at the time.
There are products out there where you can plug a bunch in at once.
For Example
I know nothing about the above product and am not endorsing it. It's something I found in two seconds of internet searching.
Easiest way is to use a RCA switch. You will also likely need multiple power strips to be able to have all the power cables plugged in.
Yes there is a av cord switch that supports up to 8 consoles at a time you can order one from Amazon here. 4 consoles: https://www.amazon.com/Mechanical-Splitter-Composite-Switcher-Selector/dp/B075XKZ1Q4/ref=mp_s_a_1_2_sspa?keywords=av+switch&qid=1571533766&sprefix=Av+sw&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyQUZUWk5XUDEyTk9aJmVuY3J5cHRlZElkPUEwNDY2NjA2MjhRQ0MwNkQ5RTI2JmVuY3J5cHRlZEFkSWQ9QTA3MDU4MTkzTFZGVFdYT1U2Ukk3JndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
8 consoles:
https://www.amazon.com/Panlong-Switcher-Composite-Selector-Consoles/dp/B00KXVBB7C/ref=mp_s_a_1_3?keywords=8+av+switch&qid=1571533876&sr=8-3
I have a couple of these here. Then use a AV to HDMi converter for the big screen since it doesn't have any av hook ups. Im sure there are better solutions out there but this was reasonably inexpensive.
Edit* you can see one of them on top of the Xbox 360.
https://www.amazon.com/Panlong-Switcher-Composite-Selector-Consoles/dp/B00KXVBB7C/ref=mp_s_a_1_2_sspa?keywords=av+switch&qid=1574462496&sprefix=av+swi&sr=8-2-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyWVMxRVE3V1o3UUlLJmVuY3J5cHRlZElkPUEwNDUxNzk3SzhFMzlKVjZOUUVIJmVuY3J5cHRlZEFkSWQ9QTA2MjIwNTYxTERXR0pFTEZCWVY4JndpZGdldE5hbWU9c3BfcGhvbmVfc2VhcmNoX2F0ZiZhY3Rpb249Y2xpY2tSZWRpcmVjdCZkb05vdExvZ0NsaWNrPXRydWU=
Take a look at this. I use this for my game collection. I still have to use two switches though.
http://www.amazon.com/Panlong-Switcher-Composite-Selector-Consoles/dp/B00KXVBB7C
Yes, it’s called an RCA Switcher.
https://www.amazon.com/Panlong-Switcher-Composite-Selector-Consoles/dp/B00KXVBB7C
This and This should sort you out.
The Yellow Composite Cable is shared with the Green Component input (second pic where it says "Video/Y"). Then just plug in the red & white audio to the left of that.
Then get something like this to switch consoles.
I have one of the "8 in 1 out" and one of the "4 in 1 out" ones both from the same company and they work well so far.
https://www.amazon.com/gp/product/B00KXVBB7C/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
They are all AV component compatible. I plugged them into this: https://www.amazon.com/dp/B00KXVBB7C?ref=ppx_pop_mob_ap_share which is plugged into the TV.
You need a Composite video switch, like this
http://www.amazon.com/Panlong-Switcher-Composite-Selector-Consoles/dp/B00KXVBB7C
Not banned from amazon I hope.
I use two of these. They aren't 100% the best solution for video quality with an HD tv but it gets the job done :)
https://www.amazon.com/Panlong-Switcher-Composite-Selector-Consoles/dp/B00KXVBB7C
Hey man I don't know about a passive switch that automatically changes based on input. I use this 8 input switch and it is awesome.
https://www.amazon.com/dp/B00KXVBB7C/ref=cm_sw_r_cp_apa_i_HcGMDbPCX3CBD
I have 2 Panlong switches plugged into another switch that has 4 inputs (2 AV and 2 S-Video) for a total of 18 possible consoles. HDMI switch is separate. They work beautifully.
Ok, awesome.
Any idea if this is the same unit?
Looks the same but has a different company name on the unit -
http://www.amazon.ca/Panlong-Switcher-Composite-Switch-Selector/dp/B00KXVBB7C/ref=pd_sxp_grid_i_1_0
Your's - http://www.amazon.com/gp/product/B00DRGDBTG/ref=oh_aui_detailpage_o03_s00?ie=UTF8&psc=1
Thank you for all that! That was a useful YouTube video, too.
I had to make the purchases yesterday, since I'll be playing with actors in the studio on Monday. That said, I still have time to buy some things.
It's a comfort that I seem to be on the right track. The biggest difference between what I bought and your suggestions is that you suggested I buy the Dock-Kings and other pricier receiver/converting gear. I'd appreciate if you could look at my list of purchased items to determine if you think it will work, or if you see some some red flags.
I suppose in the long run, if this theatre show concept shows promise, we would then invest in more reliable gear, such as no-compression wireless HDMI tx/rx. For now, here it is:
​
4 cameras:
https://www.amazon.com/gp/product/B06Y5D8SPZ/ref=oh_aui_search_asin_title?ie=UTF8&psc=1 (1S LiPo)
2 x https://www.amazon.com/gp/product/B06Y56RL5P/ref=oh_aui_search_asin_title?ie=UTF8&psc=1 (1S LiPo)
https://www.amazon.com/gp/product/B0184DVN4G/ref=oh_aui_search_asin_title?ie=UTF8&psc=1 (2S or 3S LiPo)
​
3 receivers (should I buy different antennae?):
https://www.amazon.com/gp/product/B0774SMGQN/ref=ppx_yo_dt_b_asin_title_o03_s01?ie=UTF8&psc=1
2 x https://www.amazon.com/gp/product/B01H36AIGY/ref=ppx_yo_dt_b_asin_title_o03_s02?ie=UTF8&psc=1
​
3 AC/DC adapters for the receivers:
3 x https://www.amazon.com/gp/product/B01ISM267G/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
​
3S LiPo (for 3S LiPo camera and try battery-powered Receiver)
2 x https://www.amazon.com/gp/product/B07GF63645/ref=ppx_od_dt_b_asin_title_s00?ie=UTF8&psc=1
​
Battery chargers
https://www.amazon.com/gp/product/B00466PKE0/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
https://www.amazon.com/Battery-Charger-Channel-Inductrix-Connectors/dp/B074M6G2MD
​
Each receiver has an AV output + AV RCA cable. I'll plug in the RCAs from 2 or 3 receivers into this Switcher:
https://www.amazon.com/gp/product/B00KXVBB7C/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
​
Using an RCA cable, connect the Switcher's Output to this RCA to HDMI converter:
https://www.amazon.com/gp/product/B07KTDG177/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1
​
Then HDMI to projector.
​
Ta-da?
http://www.amazon.com/Panlong-Switcher-Composite-Selector-Consoles/dp/B00KXVBB7C
I have one of these so I have 6 systems hooked up through my KV-36FS120 .
Would highly recommend it so you don't have to constantly swap inputs.
I bought this off Amazon, I used a label maker to label mine by system instead of numbers. It works great for me!
Panlong 8-Way AV Switch RCA Switcher 8 In 1 Out Composite Video L/R Audio Selector Box for DVD STB Game Consoles https://www.amazon.com/dp/B00KXVBB7C/ref=cm_sw_r_cp_api_ktQRBbR5MY5KK
CRT stands for cathode ray tube, AKA an old, big, heavy, tube TV. Retro gaming enthusiasts generally consider them the superior way to play retro game consoles.
Yes, the NES only outputs mono audio just like the AV port on the back of the model 1 Genesis. The model 1 Genesis does stereo out of its headphone jack on the front so you can pipe it into your TV or receiver using a 3.5mm to RCA plug adapter. If you want to plug the mono audio source of the Genesis or the NES into a stereo receiver or TV and get sound out of both speakers you will need to use an RCA Y-cable or splitter. Specifically you will need one with a single female RCA style plug on one end and 2 male RCA style plugs on the other. These can be fairly easily found on sites like Amazon and eBay. Be sure you get one with ONE female and TWO male connectors though.
Something similar to this: https://www.amazon.com/InstallerParts-Stereo-Female-Splitter-Most-Audio/dp/B008NCD5WC/ref=sr_1_7?keywords=rca+mono+splitter&qid=1568118716&s=gateway&sr=8-7
If you use a switch box for your consoles you may consider not even sending the audio to the TV unless you want to control the volume with the TV remote. I have all my retro consoles connected to an 8-way passive switch box. I send the video signal to the TV and I have the audio sent straight to my receiver. It’s just one less thing to add noise to your analog sound signal.
The passive switch boxes are fairly cheap and seem reasonably robust. They can be found on Amazon and eBay as well. I use an 8-way model but you can get 4-way models as well.
I use this one: https://www.amazon.com/Panlong-Switcher-Composite-Selector-Consoles/dp/B00KXVBB7C/ref=sr_1_4?crid=UBDETJBPTMBU&keywords=rca+box+switch&qid=1568118835&s=gateway&sprefix=rca+box%2Caps%2C154&sr=8-4
This is probably a stupid question so correct me if i am wrong, but arent there other good S-Video & Composite switch boxes like this one(Only has composite though) that are much cheaper?
The easiest is probably going to be a composite video switcher, something like this: https://www.amazon.com/Panlong-Switcher-Composite-Selector-Consoles/dp/B00KXVBB7C
The video quality isn't fantastic, particularly on an HDTV, but it's way better than RF and all your consoles support it.
That really isn't a very good TV for retro games. The Component and Composite connection share the same jacks, so you can basically only get a Composite switch, run everything into that, then out from the switch to the TV. Since the 3rd connector for the Component uses the Composite jack you will be limited to an inferior connection for everything.
Please do him a favor and really consider that Trinitron. It will be cheaper, zero input lag, way more connections, and a much better picture. (this message courtesy of /r/crtgaming)
Mine are cheap, like 25 bucks on amazon
https://www.amazon.com/Panlong-Switcher-Composite-Selector-Consoles/dp/B00KXVBB7C/ref=sr_1_1?ie=UTF8&qid=1467136230&sr=8-1&keywords=8+way+av
I bought one of these a couple months ago for my CRT setup. It’s worked flawlessly and the buttons have a real satisfying ca-chunk.
This RCA switcher will take care of your RCA needs. I would then run the output from the RCA switcher into this [RCA to HDMI converter] (https://www.amazon.com/GANA-Composite-Converter-Adapter-Supporting/dp/B01L8GG6PW/ref=sr_1_1_sspa?s=electronics&ie=UTF8&qid=1510170964&sr=1-1-spons&keywords=rca+to+hdmi&psc=1).
Then maybe you'd want to consider picking up 2 of these 5x1 HDMI splitters. Just make sure you keep everything labeled so you know what's what. Hope that helps!
Just guessing, https://smile.amazon.com/Panlong-Switcher-Composite-Selector-Consoles/dp/B00KXVBB7C.
For the people talking about having 6 vcrs to connect all these, that's definitely not the case. Although this is a dirty, dirty repost, I wanted to chime in to say that I have a similar setup. It's probably a little more than half as comprehensive. The easiest way to set this up is with AV switches that feed into HDMI switches. Then you just print out a handy chart so your room mates don't bitch to you about not being able to work the TV.
This is the AV switch that I use:
https://www.amazon.com/Panlong-Switcher-Composite-Selector-Consoles/dp/B00KXVBB7C
This is the HDMI switch:
https://www.amazon.com/Monoprice-Blackbird-Enhanced-Equalizer-Control/dp/B01GCGKMTO/ref=sr_1_35?s=electronics&ie=UTF8&qid=1518976317&sr=1-35&keywords=hdmi+switch+5x1
The HDMI switch is very important because some of the "smarter" HDMI switches will only display video encoded in certain ways. This is a giant pain in the ass. I originally got an 8 way switch but had to return it because it wouldn't display the PC output.
So basically I have all the older systems (snes, n64, dreamcast, wii, playstation 2) feeding into the AV RCA switch, which is input 1 on the hdmi switch. Then I've got Playstation 4 as input 2, Nintendo Switch as input 3, a RetroPie/Kodi setup as input 4, and a full linux media server as input 5. The HDMI switch then feeds into an elgato capture card which connects back to the media server in case we want to stream some retro games.
I have all of this set up in the most efficient way possible so that I get access to the most games possible with the least amount of hardware. I specifically chose the physical consoles that I wanted because they were hard to emulate and because I knew I could soft mod them to get a ridiculous amount of games with little overlap in catalogs. To this end I use the n64, which is not possible to emulate well on the raspberry pi 3 because of the hardware limitations and because I would have to have a whole different controller setup. The n64 to usb adapters are not good. I have two of them. Eventually I want to get an everdrive for this, and even an hdmi mod, but for now my cartridge collection is pretty extensive. I also modded it to be region free. Most of my cartridges are for this system and for SNES. The SNES is there for two reasons: firstly because sometimes there is input delay on the Pi and so if you want to play mario or something precise it's better to do it on the real deal. Also I like having the super gameboy plugged into this all the time because I make chiptunes in LSDJ. It's nice to be able to do it on a decent and reliable screen with much better speakers then be able to move the cartridge over to the gameboy whenever I want.
Dreamcast has a very unique catalog and I can literally just burn cd's to work on it as much as I want. It's an extremely efficient and cost effective system to own. The Wii is there specificall for gamecube games. It's currently softmodded with homebrew and has a usb switch in the back with about 50 of the best gamecube games. The PS2 is a similar situation. It has a big ass spinning hard drive in the back with a bunch of PS2 games. I love these types of console mods the most, but there are significant space limitations and the setup is relatively complex. It's near impossible for me to switch out new ps2 games for example.
Anyway, anything older than that gets dumped on the retropie. It does everything up to ps1 near flawlessly. We have a usb hub permanently affixed to our end table that we can conveniently attach ps4 controllers to of we want to play retropie. We can even hook up a usb keyboard for infocom games and the like.
The rub here is that most of the fun is in setting this up and showing it off. You're gonna end up using it once a month for fifteen minutes and the rest of your time you're still gonna be playing PUBG.