Reddit reviews PERLESMITH Universal TV Stand - Table Top TV Stand for 37-55 inch LCD LED TVs - Height Adjustable TV Base Stand with Tempered Glass Base & Wire Management, VESA 400x400mm

Save yourself the trouble and get something like this:

https://www.amazon.com/PERLESMITH-Universal-Stand-Adjustable-Management/dp/B077MJZ6ZG/ref=mp_s_a_1_1_sspa?keywords=tv+mount+stand&qid=1574802379&sprefix=tv+mount+s&sr=8-1-spons&psc=1&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUEyTU85SlRLRlo0RCZlbmNyeXB0ZWRJZD1BMDczNDYzMzFaUkJKUDVSQzhJU04mZW5jcnlwdGVkQWRJZD1BMDg5Nzc2MjI1NTM3WFc4NlVGSUEmd2lkZ2V0TmFtZT1zcF9waG9uZV9zZWFyY2hfYXRmJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ==

Or this
PERLESMITH Universal TV Stand -... https://www.amazon.com/dp/B077MJZ6ZG?ref=ppx_pop_mob_ap_share

Don't shove a center channel or L/R speakers into the cabinet.

For the L/R speakers, get stands, those will just on the floor on either side of the cabinet.

For the center channel, get this TV brack https://www.amazon.com/gp/product/B077MJZ6ZG

It'll raise up your TV enough to place the center channel below the TV.

Height Adjustable Table Top TV Stand on a low 12" to 20" media cabinet. Or 2 feet style.

TV Positioning: Vertically centered at eye level while seated.

I think this is the one: https://www.amazon.com/dp/B077MJZ6ZG/ref=cm_sw_r_cp_api_i_Dxw0DbC6V4V0V

I go with #2 B.A., but you have room for Miccas it seems.? Micca MB42XC are 5.25" Wide, MB42X - 5.75" (I just measured mine)

https://i.imgur.com/ow7LG5ul.jpg

or 3 of the Micca 0o0 as sugested and use existing surrounds

I'd Wall Mount R/ L and a lil Bigger center would Fit, or raise Tv a few inches and many centers would fit on Top of cabinet. Wall Mount TV or Butcher block base under tv foot or cabinet top tv stand.

Kids cant knock over wall mounted.......

https://www.amazon.com/PERLESMITH-Universal-Stand-Adjustable-Management/dp/B077MJZ6ZG/

https://www.amazon.com/Mount-Heavy-Duty-Universal-Adjustable-Bookshelf/dp/B01MTKXTN5

https://www.accessories4less.com/make-a-store/item/cantgle417blka/canton-gle-417-5-2-way-on-wall-lcr-speaker-black-each/1.html

if you opted to Wall mount R / L you could go with the DCM speakers on Ebay

https://www.ebay.com/itm/2-Pack-6-5-Bookshelf-Home-Theater-Speakers-100W-RMS-TP160S-CH-DCM-by-MTX-Audio/193084846113?

If the TV is vesa mountable, I would get a universal tv stand that would better fit the mantle. If you are worried about your kids yanking it, also get some anchor straps. Much less work than building a frame and using a wall mount imo, especially for a rental place. Having it on a stand even with anchors would allow you to slide it sideways to access switches behind. They even make stands that swivel, though I'm not sure how much clearance you will get in that spot.

another option is to get a 3rd party tv stand that lets you keep tv on cabinet but raise it high enough to clear the speaker.

Something like this:

PERLESMITH Universal TV Stand - Table Top TV Stand for 37-55 inch LCD LED TVs - Height Adjustable TV Base Stand with Tempered Glass Base & Wire Management, VESA 400x400mm https://www.amazon.com/dp/B077MJZ6ZG/ref=cm_sw_r_cp_api_i_toOyDbCEGGEZC

maybe not ~exactly~ what you're after- but I settled on this when i was searching for a similar solution for my setup. This way allowed me more latitude in my shelving choice.

i'd check for burn in and offer 150. having many panasonic plasmas myself, I think they are vesa compatible. I just ordered a tabletop mount for my sony oled, which came with this tilting mount stand which I didnt like.

i got these:

https://www.amazon.com/gp/product/B077MJZ6ZG/ref=ppx_yo_dt_b_asin_title_o05_s01?ie=UTF8&psc=1

the stand is fine, if a bit wobbly when you touch it, so I got some anti tip anchors to attach the stand to the back of the shelf its sitting on

What about something like this?
https://www.amazon.com/PERLESMITH-Universal-Stand-Adjustable-Management/dp/B077MJZ6ZG/ref=mp_s_a_1_3?keywords=tv+risers+for+flat+screens&qid=1572901807&sprefix=tv+riser&sr=8-3

Your TV makes me nervous! You might try something like this I put my mom’s TV on one. It works great, and when you can’t mount the think on a wall due to rental (or whatever) it works.

You could spend a little more and get an s30. Then use something like this to be compatible with your tv stand, https://www.amazon.com/dp/B077MJZ6ZG/ref=cm_sw_r_cp_apa_i_rBuCDb96GVKW7

Just get a universal TV stand that’s adjustable and put the center under the TV.

Something like this.

https://www.amazon.com/dp/B077MJZ6ZG/ref=cm_sw_r_sms_awdb_t1_2FHrDbCRD86WW

Edit: just saw you have a 65” they make stands for that too, I just wanted to give you a general idea of the stand type.

You could try a stand like this(https://www.amazon.com/dp/B077MJZ6ZG/ref=cm_sw_r_cp_api_i_qe4xDbA46874A) with just the legs, not the actual bottom part, kind of like a tv cart but one that attaches to the vesa mounts. Thanks a lot for the breakdown of displaufusion. I will have to take a look at that when I get back home. It’s going to be sick when we can do this all in VR

https://www.amazon.com/VIVO-Universal-Screen-Table-STAND-TV00Y/dp/B01N0VNIA9/ref=sr_1_4?s=furniture&ie=UTF8&qid=1523119661&sr=1-4&keywords=tv+stand

https://www.amazon.com/PERLESMITH-Universal-Stand-Adjustable-Management/dp/B077MJZ6ZG/ref=sr_1_7?s=furniture&ie=UTF8&qid=1523119661&sr=1-7&keywords=tv+stand