Reddit Reddit reviews Philips Hue Smart Dimmer Switch and Remote (Requires Hue Hub, Installation-Free, Smart Home, Exclusively for Philips Hue Smart Bulbs)

We found 35 Reddit comments about Philips Hue Smart Dimmer Switch and Remote (Requires Hue Hub, Installation-Free, Smart Home, Exclusively for Philips Hue Smart Bulbs). Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Electrical Equipment
Electrical Switches
Dimmer Switches
Electrical Wall Switches
Philips Hue Smart Dimmer Switch and Remote (Requires Hue Hub, Installation-Free, Smart Home, Exclusively for Philips Hue Smart Bulbs)
Take Control: The Philips Hue Smart Dimmer Switch allows you to Control Your Philips Hue Smart lights from the comfort of Your couch or Bed; The Battery Powered Wireless Hue Dimmer Switch with Remote smoothly adjusts the intensity and Color of Your Philips Hue Smart bupounds, and switches them on and offSchedule Your Own Custom Lighting Scenes : When using Your Philips Hue Smart Dimmer Switch with Philips Hue Smart Bupounds, you can use the on button to switch between 4 light recipes without the Philips Hue app, or use the Philips Hue app to configure Your 4 favorite scenes hue Ecosystem; This is the Perfect way to personalize Your Smart HomeLimitless Possibilities: Control up to 50 lights using the Philips Hue hub, or use the Dimmer switch without the Philips Hue Hub to Control up to 10 Smart lights; The Philips Hue Dimmer switch Doesn't require an internet connection to work.Voltage:1.5 voltMaximum Flexibility: Mount the Philips Hue smart Dimmer switch Anywhere with the Included screws or adhesive tape, the removable remote for ease of use; No re wiring required; Dimensions: Switch: 0.43 inch D x 1.38 inch W x 3.6 inch H, Wall plate: 0.55 inch D x 4.5 inch W x 2.76 inch HEasy Installation: Install Your Philips Hue device in a minute; Simply follow the instructions in the Philips Hue app; Our default settings give you immediate Control over Your Smart lights; Customize the Smart Lighting scene settings in the app to fit Your needsSmart Home device Compatibility: When you use the Philips Hue Dimmer switch with a Philips Hue hub, the dimmer switch can be used to Control any Alexa Smart Home device or a HomeKit compatible appliance via the Apple Smart Home app
Check price on Amazon

35 Reddit comments about Philips Hue Smart Dimmer Switch and Remote (Requires Hue Hub, Installation-Free, Smart Home, Exclusively for Philips Hue Smart Bulbs):

u/fastlerner · 8 pointsr/smarthome

These become a LOT more functional if you spring for the $25 Hue Dimmer switch for each room. Gives you on/off/dimmer plus in the app you can set it up so you can cycle through 5 different scenes as you keep pressing the ON button. You can also add automations (like color changing) by holding ON, etc...

Switches dock in the plate with a magnet so you can remove it and leave it on your nightstand or coffee table for easy control. Also, since it pairs directly with the Hue hub, it's all local control.

It's really nice to be able to just tap the control to pick a scene or dim the lights without having to talk to Google or Siri. These suckers made an almost regrettably expensive lighting purchase much more enjoyable and usable for everyone.

u/koopa2002 · 6 pointsr/homeautomation

The best thing for you, imo, since you’ve already invested a lot in hue is to get the little hue dimmer remotes. You’d use the remotes instead of the physical switches and you’d lock the switches with a switch lock/guard.

Philips 473371 Hue Dimmer Switch Smart Remote (Installation-Free, Exclusive for Philips Hue Lights), White https://www.amazon.com/dp/B076MGKTGS/ref=cm_sw_r_cp_api_dpaSAbSV6SY55

In the future, as was already said, if you can use a smart switch then it would almost always be preferred to use a smart switch.


Edit:keep in mind that the smart switch from GE is zwave and requires a zwave hub like smartthings.

If you were to get into a hub then that opens up a while world of other possibilities but I think that might be beyond your scope of what you want.

u/huffalump1 · 5 pointsr/functionalprint

I have this Hue switch mounted right next to my normal light switch (renting).

Still, why spend $25 when you can spend hours designing and printing something instead?? (Because it's fun is why)

https://www.amazon.com/dp/B076MGKTGS/

u/snakesonatoni · 3 pointsr/Hue

I actually had this happen over the weekend and found out my dimmer switch worked regardless of my internet being back up. It's now become my 'kill all' switch for when the power goes out.

u/Viper999DC · 3 pointsr/homeautomation

Philips Hue has wireless dimmer switches. They don't replace the switch, but you leave the physical switch on at all times, and put this nearby / on top. They control Hue smart bulbs.

u/twitchy_fingers · 3 pointsr/homeassistant

stick a pico remote to the wall and you'll get 5 buttons you can use to pass into Home assistant. then an IR/RF emitter to send commands to the fan from Home assistant. if you're already thinking about getting hue, you could get their remote and stick it to the wall.

If there's no switch on the wall then the fixture must be wired to always be on, or maybe there's a switch/relay in the breaker box itself, so smart bulbs could be a good fit. you'll still need an IR/RF emitter to control the fan though.

u/tablesawsally · 2 pointsr/HomeImprovement
u/laydros · 2 pointsr/Hue
  • LIFX are brighter, have bolder colors, and for a single light will cost less.
  • People occasionally talk about having connectivity issues with LIFX, and I can't imagine having dozens of extra WiFi devices won't lead to some issues.
  • Hue has a bigger ecosystem. It's been very popular for a long time. There are lots of third party integrations that can provide all sorts of stuff. I've never tried it but the Hue app has built in support for automations based on your location or time of day. LIFX might have these in the app, but without a hub I imagine they would need to be activated from your phone, which sometimes works well, but sometimes doesn't.
  • Hue has a motion sensor and a couple of choices for wall switches that can be used just with the Hue hub. The very popular dimmer switch is only $25 USD, and currently on sale.
  • I think to have a wall switch with LIFX you would need to have some sort of home automation hub in place like SmartThings/Wink/HomeKit/Indigo/etc. Or you might be able to get some sort of generic switch like the Logitech Pop (which requires its own hub) to trigger things through IFTTT.
  • I think either Hue or LIFX color bulbs will provide good color shift. Both have pretty good quality light and light color. I expect some of the no-name bulbs you can find on Amazon would be pretty bad.
  • I find the reviews from the Wirecutter to be useful to research this kind of thing.

    Edit: In terms of a switch to control it, either bulb can be turned off by the existing wall switch or lamp switch. Either can be turned on by the same switch, but at least with Hue's current firmware, it will revert to full brightness white, I don't know about LIFX. However if you do turn it off with one of those switches, there is no way to turn it back on with the app/voice assistant/etc. So when I talked about the switches above, I'm talking about smart switches.

    I don't think I was clear either that I think Hue might be the way to go. Of course you will get some bias towards Hue in /r/hue, but if you are concerned about reliability, automation, and control capabilities, I think Hue has more to offer.
u/steinah6 · 2 pointsr/DIY

We just used the Philips Hue Dimmer Switch. It only works with Hue, to my knowledge. It just attaches to the wall, it's battery powered and wireless. Blanked off the existing switch for the ceiling light.

Otherwise I'd recommend the Lutron Caseta, they require another proprietary hub but don't require neutral wires.

And yeah it's been quite a busy year so far. Hopefully it slows down for the holidays (yeah right... we're hosting apparently)

​

Edit: if you want to "smart" things up, get a Smartthings hub and motion sensor or door sensor. You can set your Hue lights to turn on automatically when the sensor detects you!

u/Davedamon · 2 pointsr/googlehome

I think you don't really grasp how the hue bulbs work. They need to have continuous power to operate, this allows them to turn on and off, dim and change colour.

If you power off the lamp, you're cutting off the power to the system in the bulb that controls it. It's like expecting your google home to work if you turn it off at the wall.

You have four options for physical switches, that vary in price from cheapest to most expensive.

  1. IKEA Trådfri Dimmer - this will let you turn your light on and off and dim it. It can be a little fiddly and don't knock it in the night or it'll turn your lights on (this has happened with our cats)

  2. IKEA Trådfri Switch - this lets you toggle the light on and off with a click and adjust brightness. The other two buttons won't do anything, but it's a cheap and reliable switch

  3. Hue Wireless Dimmer - cheapest official hue switch. You can map scenes to presses of the on switch, and using other apps, you can create more complex behaviours based on press and hold etc

  4. Hue Tap Switch - most expensive option, this switch requires no batteries, but allows you to map up to four different behaviours to each of the four switches. You can even set it to toggle scenes on and off to each button using Hue Labs.
u/JJ-KwiK · 2 pointsr/homeautomation

As an FYI - TRÅDFRI can pair with the Hue Bridge

Keep the trådfri bulbs but get a Hue Bridge instead of the Ikea hub. Then you can pair them with the hue dimmer switch. Works fine for me in my living room that doesn't have any physical switches.

https://www.amazon.com/Philips-Dimmer-Switch-Installation-Free-Exclusively/dp/B076MGKTGS/

u/jevdokimoff · 2 pointsr/homeautomation

The easiest solution would be to go with something like this: https://www.amazon.com/dp/B076MGKTGS/ref=cm_sw_em_r_mt_dp_U_iTnJDbPWF33T2

The work great with the Hue bulbs and can be mounted on the wall like a regular switch. There are other similar options, but in my opinion these look the best and are the most user friendly. Might be a good interim solution even if you decide to get into a more sophisticated system like Smartthings or Home Assistant.

My girlfriend also hates using Alexa to control lights so I've done a similar thing and set presets for color and brightness based on time of day which greatly reduces how often she has to deal with the lights. Motion sensor that trigger simple lights like hallways and bathrooms work well too.

u/bobmatnyc · 2 pointsr/homeautomation

Caseta makes a great product, I use them everywhere - both the smart dimmers, and switches, and also use their non-smart motion sensing switches.

Having said that, you can't use voltage switches with smart bulbs!

At least not the current generation, and since they need to maintain state non likely in the future unless the add non-volatile storage and that will get expensive.

You need to use a "virtual switch" of some type, one that basically sends data commands to the bulbs like your phone does. I have about 30 smart bulbs in my place and so believe me it's a sore spot.

The good news for you is that since you have Hue bulbs (too expensive for the number I wanted), you can use the Hue Dimmer Switch which is designed just for this purpose:

No wiring needed, just paste it to a wall somewhere and connect to your hue hub.

I use a combination of the Brilliant Switch and the SmartThings controller to kind of do the same things, but my bulbs are Tuya which doesn't have an integration yet, so it's a kludgy solution.

u/taekwondont · 2 pointsr/HomeImprovement

Had this same situation. The best solution for me was to buy a Philips Hue LED bulb and this switch: https://www.amazon.com/dp/B076MGKTGS/ref=cm_sw_r_cp_apa_i_xDFoDbRMBEXX5

This way I can leave my spotlight motion detector powered so it works when it's supposed to, but I can turn the porch light on and off as I want to and don't have to leave it on all the time.

u/AngryButt · 2 pointsr/homeautomation

Philips Hue sells switches that are wireless. Can screw them onto the wall or use the included adhesive. I currently use one for a setup in my kitchen. Requires a Hue hub and a hue light, but might be a good solution.Amazon link

u/hertzsae · 2 pointsr/homeautomation

Mostly a gimmick. A fun gimmick, but a gimmick nonetheless. It really depends on what your budget is. Is approx $20/bulb worth it for a novelty? For me, it was in a few places, but I probably wouldn't do it again. The temperature thing is now a must after having the color and the ambient. I hope to never go back to a single temp bulb again. That's worth $15 premium of the ambient over the cheap white ones.

Get the dimmer switches. 100% worth the money. Then put these guards over your current switches.

u/daranto_1337 · 1 pointr/homeassistant

I use this one: https://www.amazon.com/gp/aw/d/B076MGKTGS/ref=mp_s_a_1_1?ie=UTF8&qid=1520078873&sr=8-1-spons&pi=AC_SX236_SY340_QL65&keywords=hue+switch&psc=1

All buttons can do different things. You can also use a short press and a long press for different actions

u/complicatedAloofness · 1 pointr/Hue

Can't you get the removable dimmer switch and just use it as a remote? I do that and it's pretty useful.

https://www.amazon.com/gp/product/B076MGKTGS/ref=ppx_yo_dt_b_asin_title_o09_s00?ie=UTF8&psc=1

u/redroguetech · 1 pointr/homeautomation

It also occurred to me (thanks to /u/b1g_bake for prodding my thinking a bit), you need to consider what kind of control you want. I recommended the FLS-pp, and it would do as advertised. If you were using white only, you could dispense with a "smart controller", and instead get a "smart switch" (so Google/Alexa would control the power). That doesn't allow color control. But, if only white, you could just use a normal switch and forget the voice control.

However, voice control gets tedious, and doesn't give you any control over color. (There may be Alexa Skills/Google Recipes that allow it...?) As I recall, the FLS-pp does have app control. I have one, but I've got nine home automation apps; I don't remember if one of them is for it or not (or if it didn't require an app to connect to my system)! The Fibaro does have an app, or at least... my phone has an app installed called "Fibaro" :-P

Color control is always tricky, because you need a color wheel or something equivalent. There are control panels, but you'd be getting into hub territory. Personally, I'd say it's worth it, but it depends on your budget. Controller + cheap LED strips + power supply, you're looking at ~$170 on the low end. To get a control panel and hub, you're going to (approximately) double that.

edit2: What I'd recommend (if budget allows) is to get a controller hub with a remote control, and have the remote control switch between a few preset "scenes". Hue + a Hue dimmer can do that ($75 for both; I actually have an extra Hue hub you can have for cheap). The FLS-pp and the Fibaro can connect to Hue. That would also allow adding /u/dabe9600's idea, Hue color bulbs either on the deck or inside, expanding to other lighting (like under-cabinet kitchen accents), etc., etc. /edit2

edit: And there are cheap little WiFi controllers that can do Alexa/Home. I didn't recommend it, because they wouldn't be able to connect to much of anything else. Also, a lot of them also go through the cloud, so you'd have a built in 1 second delay on response times. However, they can be had for $20 or less (even as little as $5 off AliExpress). The cheap ones don't power the LEDs, and otherwise only handle one strip without a booster.

u/Morphv · 1 pointr/homeautomation

I would wire them to be always on. Remove the current switch and stick a philips hue dimmer switch where you want a switch. All other switches will probably have a delay speaking with the HUB.
https://www.amazon.com/Philips-473371-Dimmer-Installation-Free-Exclusive/dp/B076MGKTGS/ref=sr_1_1_sspa?ie=UTF8&qid=1525883160&sr=8-1-spons&keywords=philips+hue+switch&psc=1

u/Mohawks-already-takn · 1 pointr/Hue

You can install Hue switches. They’ll do exactly what you’re looking for.

https://www.amazon.com/Philips-Dimmer-Switch-Installation-Free-Exclusively/dp/B076MGKTGS

u/Nascent1 · 1 pointr/Hue

What do you want it to do that this can't?

u/derekpanderson · 1 pointr/homeautomation

If you want smart lights and need a physical switch to use I would suggest two options.

The first option is to upgrade your wall switches. I have used these before and have had no issues Lutron Caseta Wireless Smart Lighting Dimmer Switch for Wall & Ceiling Lights, PD-6WCL-WH, White, Works with Alexa, Apple HomeKit, and the Google Assistant https://www.amazon.com/dp/B00KLAXFQA/ref=cm_sw_r_cp_apa_x-WWBbPYJ4QP5

If you want to go the Hue light route you can buy wireless switches and use the included 3m mounting to hang it on your wall Philips Hue Smart Dimmer Switch with Remote (Installation-Free, Smart Home, Exclusively for Philips Hue Smart Bulbs), 1 https://www.amazon.com/dp/B076MGKTGS/ref=cm_sw_r_cp_apa_IeXWBb02JK78V

u/InovelliUSA · 1 pointr/homeautomation

Hey /u/adrojono,

Thought I could help and also offer some clarification on the patent question you had.

As /u/fastlerner mentioned, Philips Hue bulbs aren't meant to be put on a smart switch, but rather controlled from their app (or if you have their bridge paired to your HUB, you can control from your HUB -- either way, it's meant to be controlled remotely vs physically).

There are some other options for you. Philips Hue was actually one of my first smart home purchases and I love their bulbs. I use a couple of things to manually control them:

  • They have a remote switch that you can use: https://www.amazon.com/Philips-Dimmer-Switch-Installation-Free-Exclusively/dp/B076MGKTGS

  • Inovelli switch (Disclaimer: I'm the owner lol)

    The remote works fantastic and I still have them up around the house to control the dim levels of the bulbs. It pairs directly to the Hue bridge and you can dim up/down and also set favorite scenes (I believe... I just use it for dim up/down).

    The Inovelli switches (I have the old version bc the new one is still in testing, but it will have the same features) allow you to disable the internal relay and also send a Z-Wave Scene Command to your HUB (Please note: You have to have a HUB that supports Z-Wave for this as the Hue Bridge is ZigBee -- I'm assuming since you mentioned you have a GE 14294 switch that you do have a Z-Wave enabled HUB).

    How this works is that you would install the Inovelli switch, disable the internal relay (so when you tap the switch off, it does not physically cut power to the light bulb), and then set up your scenes to control the Hue bulb.

    To give you an example -- my daughters love their color lights and likes to go to bed with different colors each night, so the setup is as follows:

  • Tap UP 1x = Turns Hue onto the last setting
  • Tap DOWN 1x = Turns Hue off
  • Tap UP 2x = Turns Hue PINK at 50%
  • Tap UP 3x = Turns Hue PURPLE at 50%
  • Tap UP 4x = Turns Hue GREEN at 50%
  • Tap UP 5x = Turns Hue BLUE at 50%
  • HOLD UP = Changes dim to 75%
  • HOLD DOWN = Changes dim to 25%

    Now the limitation here is that you cannot dim up/down in real time, nor get to a precise level. This is because Hue speaks ZigBee and Inovelli speaks Z-Wave and it has to be interpreted at the HUB level and there is no commands that translate to dimming up/down in realtime between Z-Wave and ZigBee.

    Hopefully that makes sense?

    Ok, now onto the patent issue. I can't speak in detail about it for legal reasons, but I can say the patent was around how our switch works in a 3-Way setting.

    As you may know, one of the features of the switch is that it can be used in multiple 3-Way settings:

  • It will work with a dumb switch at one end
  • It will work with an aux switch at one end
  • It will work with another smart switch at one end

    The first bullet point was actually patented by Zooz and they were kind enough to share this with us right as we were going to production, so we had to make a modification, which caused a delay.

    The good news is that we were able to find a different way of making it work, so we wouldn't violate the patent.

    So, to directly answer your question of cutting out features and quality:

    The answer is no, we did not have to cut out any features and no, we did not sacrifice quality to do so. I wish I could tell you exactly how we did it, but we are actually in the patent process ourselves around our approach to solving the 3-Way with a dumb switch issue, so I can't disclose right now :/

    As for switch recommendations:

  • HomeSeer: I've had their WS100 since it came out and it's been my favorite switch since. I like the scene control (double tap, triple tap, etc) and the aesthetics. But their new WS200 looks awesome and has all the bells and whistles.

  • Zooz: I don't personally have any of their switches, but Agnes is awesome and I really love what they're doing over there from an innovation standpoint. Their customer support is great from what I hear too. Amazing pricepoint on their switches for what you get as well.

    Hope this helped a bit and I'm happy to answer any other questions!

    Eric

    Founder | Inovelli
u/mulderc · 1 pointr/HomeKit

Most people who go all in on Hue cover the light switches with something like this https://www.amazon.com/dp/B078MDDFM7/ref=dp_cerb_2 and add some of these for switches https://www.amazon.com/Philips-Hue-Dimmer-Installation-Free-Exclusively/dp/B076MGKTGS/ref=sr_1_1_sspa?s=hi&ie=UTF8&qid=1538531531&sr=1-1-spons&keywords=hue+dimmer+switch&psc=1 or https://www.amazon.com/Philips-without-Batteries-Installation-Free-Exclusively/dp/B079P5H2WG/ref=sr_1_1?s=hi&ie=UTF8&qid=1538531555&sr=1-1&keywords=hue+tap

I currently split my time between two residences and one has hue the other Lutron and I find the hue just has all sorts of nice bells and whistles like sleep cycle alarm integration along with having solid lights that have consistent dimming and color options. The Lutron works and adds some smart functionality to your lights but in my experience getting it up to what Hue gives you takes a lot more work.

u/LDXIV · 1 pointr/smarthome

You can buy Philips hue and get a switch. That should probably do the what you are asking for.

u/benfoldsone · 1 pointr/homeautomation

I have the exact same desire as you, and it is frustrating that these are so hard to find. I do have a couple of experiments set up around my house's

The first is the easiest. I have a few Hue dimmer switches (https://www.amazon.com/dp/B076MGKTGS) in strategic locations around the house, but they are typically next to existing switches that I've taped over-the-counter and overall it's an unsatisfying solution.

My second experiment is a zwave scene controller (Gocontrol Z-Wave 3-Way Wall Accessory Switch -https://www.amazon.com/dp/B00EAY3K5Y), and it's probably my favorite solution so far, but they're difficult to come by. I don't think they're actually manufactured anymore. I have it installed talking to my automation system which turns around and talks to hue lights, and it works pretty well. I could achieve the same thing by using any zwave (or zigbee, I guess) in-wall switch and just not hook up the load write, but it seems wrong to me, and I philosophically don't want to pay for the switching or dimming hardware. My ideal price point for these would be $30-35 instead of $50.

My third experiment is something that just got released at CES (Click for Philips Hue (White) https://www.amazon.com/dp/B07MMWH2YB). It's actually also pretty elegant and doesn't actually need to be wired in, but I find it's slightly less reliable than I'd like, and I sometimes have to push the buttons decently hard or multiple times to ensure functionality.

My ideal solution would be a combination of second and third, basically a wired zigbee in-wall scene controller, and aside from the RGB one posted earlier in this thread (it's $80!!), I haven't really seen one that fits the bill, much less is reasonably priced.

u/spookthesunset · 1 pointr/arduino

Here is the route I'd go down. It's gonna be a bit complex though, but almost all home automation stuff is complex at this point.

  • Get Home Assistant installed on something (raspberry Pi is your best bet).

  • Get Home Assistant talking to your hue

  • Get an MQTT server set up. Probably on your Rasberry PI

  • Get Home Assistant configured for it

  • Now... stop using an Arduino and get an ESP8266 instead. It's basically the same thing only much, much, much better and comes with a WiFi stack, which you'll need for this project. Friends don't let friends use arduino's...

  • Get the switch working. Get it to do the right thing on MQTT. Plumb it through into Home Assistant. Get home assistant plumbed through to your Hue.

    Glossed over a metric shit-ton of detail, but like I said.... this whole "home automation" space is still pretty chaotic and complex. If you are in the apple ecosystem and have an appletv, you can also do a similar thing with HomeKit, HomeBridge and MQTT.

    Your other alternative is to simply buy a damn dimmer switch from Phillips Hue that works with their light bulbs and call it a day. They are a very high quality dimmer, honestly.
u/realestatethrow2 · 1 pointr/homeassistant

I have a few of the 4 button Hue dimmers, which I love... there was a hack to use them with Smartthings, which is OK except I want to get away from any reliance on the cloud at all.

So, since you already have a Hue bridge, these buttons can be had for @ $25. Pair them with your Hue bridge, but don't assign them to any rooms/groups/lights.

On your Pi, install node-red, and install the nodes for Homeassistant (node-red-contrib-home-assistant) and Hue(node-red-contrib-huemagic) from the palette. You can then make a flow that will allow you to do pretty much anything you want with the Hue dimmer buttons. I currently have one attached to a lamp with a Cree ZHA bulb that does on/off, dim up and down in 10% increments, long-press dim up sets to 100% brightness, long press dim down sets to 5%. I have another that controls a hacked Wifi smart plug I picked up at Walmart (Homie firmware) that works with MQTT.

u/letschat6 · 1 pointr/homeautomation

Yes they do. It's not like a traditional light switch, but you can also buy one of these if need be.

u/finnredkanga · 1 pointr/homeautomation

I've had a similar problem with a poorly placed switch. I already had a bunch of Hue lights, so I got a Hue Smart Dimmer Switch (Amazon Link) and stuck it to the wall where I wanted the switch and covered the old switch with a tamper-proof cover (Amazon Link).

​

No electrical work required.

u/htsu · 1 pointr/Hue

One more thing--can I add a wall mounted wireless dimmer switch to control the light strip after wiring it to the FLS-PP?


Like this one: https://www.amazon.com/Philips-473371-Dimmer-Installation-Free-Exclusive/dp/B076MGKTGS/ref=sr_1_3?ie=UTF8&qid=1518044853&sr=8-3&keywords=hue+wireless+dimmer+switch

u/TheKobayashiMoron · 1 pointr/HomeKit

I was surprised at first by the lack of HomeKit support, considering that most of not all of their other products are compatible. But like others have said, battery life is probably the main concern. Phillips Hue has a battery powered wall dimmer switch that can control other HomeKit devices and scenes, but they’re only able to accomplish this through the Hue bridge. Also, they are similar, but not quite not decora sized unfortunately.