Reddit Reddit reviews Platinum Tools 100054C Clamshell EZ-Rjpro Hd Crimp Tool

We found 24 Reddit comments about Platinum Tools 100054C Clamshell EZ-Rjpro Hd Crimp Tool. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Hand Tools
Crimpers
Power & Hand Tools
Platinum Tools 100054C Clamshell EZ-Rjpro Hd Crimp Tool
Ratcheted, high leverage and stable platform for consistent, repeatable terminationsPatented "crimp and trim system" delivers a clean, flush trim on the extended conductors for all EZ ConnectorsTool steel die head assembly provides 360 degrees of connector supportFull Surface to surface contact delivers uniform crimp forceBuilt-in cutter and stripper from flat and round cable
Check price on Amazon

24 Reddit comments about Platinum Tools 100054C Clamshell EZ-Rjpro Hd Crimp Tool:

u/ilikethefinerthings · 223 pointsr/cableporn

I only use the EZ-RJ45 ends now. Never going back to ones you can't push the wires all the way through.

I also use the special crimper designed to automatically cut excess cable off.

u/themoore · 10 pointsr/sysadmin

Yes! Use these all the time with great success. You'll need the crimpers to go with them as they cut off the extra wire.

u/tiredadmin · 9 pointsr/homelab

Ez crimps!

Platinum Tools 100054C Clamshell EZ-RJPRO HD Crimp Tool https://www.amazon.com/dp/B00939KFOU/ref=cm_sw_r_awd_P7PCub1BEN0HC

u/port53 · 7 pointsr/homelab

Cabling pro tip: get EZ heads and the specialized crimper. It's a little cost up front, but it'll make your cabling life so much easier.

u/username_lookup_fail · 4 pointsr/techsupportgore

These things are awesome.

u/Warsum · 4 pointsr/homelab

Platinum Tools 100054C Clamshell EZ-RJPRO HD Crimp Tool https://www.amazon.com/dp/B00939KFOU/ref=cm_sw_r_cp_apa_i_k2Z6CbXKTBCPQ

This is what I use at work. Great tool. Really heavy duty. But also a pretty penny. Work bought em and I can say it is honestly one tool that I have that's quality.

u/douchermann · 3 pointsr/homedefense

If you're dead-set on terminating with male ends instead of punching them down, try this instead: https://www.amazon.com/Platinum-Tools-100010C-Connectors-Clamshell/dp/B000FI9VU2

More pricey, you need their special tool but it'll be the last one you'll buy.

Otherwise, do what everyone else said. Punchdown tool is like 10-15 online for a decent one. Jacks are cheap.

u/spartacle · 3 pointsr/homelab

I have this crimp, and the matching ends and find reasons to use it :-)

https://www.amazon.co.uk/dp/B00939KFOU/ref=cm_sw_r_cp_awdb_zaZ7ybBS2ZV1W

u/Livineasy629 · 3 pointsr/iiiiiiitttttttttttt
u/syntek_ · 3 pointsr/HomeNetworking

FYI, a punch down tool to punch down those jacks like in the pictures attached to the OP is a completely different thing (and different skill) then what you need to crimp down the RJ45 connectors on a patch cable.

It's much easier to re-punch down the jacks then it is to crimp some patch cables, but if you would like to get into making cables, I would highly recommend getting an EZ-RJ crimper like this one on Amazon. With these (and the special connectors), you untwist the pairs and pull them through the connector and then when you crimp it will cut off the excess. Makes things MUCH easier, especially when you are just getting started.

u/beersykins · 3 pointsr/HomeNetworking

This is really expensive for a crimper, but the 'official tool' for those ends. It also slices off the passthrough bits when you crimp down. I had that crimper and the EZ ends at a previous job and the results were always positive and could even pass fluke tests super easy.

https://www.amazon.com/Platinum-Tools-100054C-Clamshell-EZ-RJPRO/dp/B00939KFOU/ref=pd_bxgy_60_2?_encoding=UTF8&pd_rd_i=B00939KFOU&pd_rd_r=C776B95H44EYJGZ5MECM&pd_rd_w=WcQxT&pd_rd_wg=WPTyb&psc=1&refRID=C776B95H44EYJGZ5MECM

u/Th3pwn3r · 3 pointsr/pcmasterrace
u/tyler212 · 2 pointsr/army

So being commo I know some good gifts for us nerds. I know you are going to spend some time making cables, so check this shit out RJ-45's that let you pull the wires though the RJ45. Well now that you got that, might as well buy the crimper with a cutting edge designed for those RJ-45's. I keep the Crimpers in a old PRC-127 radio pouch for easy attachment to my gear if needed too.

If you wanna feel like a cool guy with a gerber, but also need to run some cables? Well we got the Gerber Cable Dawg. Great thing about this thing is it has MAN's for you to get that supply guy who you have been nice too order them and comes with a MOLLE pouch to attach to your gear.

  • UCP: 5110-01-598-2253
  • Coyote Brown: 5110-01-598-2254
  • MultiCam: 5110-01-598-2248
u/PinBot1138 · 2 pointsr/homesecurity

This is the voltage detector pen that I was telling you about, /u/achstuff:

​

Klein Tools NCVT-2 Dual Range Tester, Non Contact Tester for Standard and Low Voltage with 3-m Drop Protection

​

These are the RJ-45 Ethernet jacks that I use:

https://www.amazon.com/gp/product/B079K7XMGQ/

​

This is the crimper that I use (the wires pass through the jacks and then this cuts them)

https://www.amazon.com/gp/product/B00939KFOU/

​

And this is the tester that I use:

https://www.amazon.com/gp/product/B00DQH4XPW/

​

I have some other tools which I can list, but this the base set that you'd want to use to get rolling. The nice part about these particular jacks is that their bin's outside label has the diagram for the T568B standard (which you'll want to use (assuming you're crimping both sides of the cable) unless you're trying to match T568A)

u/CVCPB · 2 pointsr/sysadmin

http://www.amazon.com/Platinum-Tools-100010C-Connectors-Clamshell/dp/B000FI9VU2

http://www.amazon.com/Platinum-Tools-100054C-Clamshell-EZ-RJPRO/dp/B00939KFOU/

These and this crimper.

I will never go back to regular tips. EZRJ-45 all the way. It says Clamshell but they are not, they're single piece tips.

u/toomanytoons · 2 pointsr/HomeNetworking

Practice, practice, practice. Or more fool proof gear like these connectors and this crimper.

u/choob_nation · 2 pointsr/computertechs

If you're getting a crimper, I highly recommend the Platinum tools ez rj-45 crimper and ez rj-45 connectors. This has changed my cabling making game.


crimprer

cat 5e connectors


[strain relief, optional but look prettt] ( http://www.amazon.com/dp/B0034B3KYU/ref=cm_sw_r_udp_awd_BLIrtb16NPMC2)



Platinum tool jacket stripper

u/gymleader_brock · 1 pointr/computertechs

I bought one of these:

https://www.amazon.com/Platinum-Tools-100054C-Clamshell-EZ-RJPRO/dp/B00939KFOU

It has the A and B standards printed on the side of the crimper!


Also it uses these ends that make the job a cinch. When you crimp it cleaves off the excess wire.

http://imgur.com/a/8ixLE

u/Butt_Hurt_Toast · 1 pointr/homelab

Depends on your ends. If you're using fancy Ez push through Cat 6's like: https://www.amazon.com/Platinum-Tools-100010C-Connectors-Clamshell/dp/B000FI9VU2 Then I'd get the platinum tools one to match https://www.amazon.com/Platinum-Tools-100054C-Clamshell-EZ-RJPRO/dp/B00939KFOU/ref=pd_sim_60_2?_encoding=UTF8&pd_rd_i=B00939KFOU&pd_rd_r=47RDY57AQH3AGVVSSR90&pd_rd_w=aewvk&pd_rd_wg=Fsm6F&psc=1&refRID=47RDY57AQH3AGVVSSR90 since it'll cut the cables off as you crimp.

Otherwise I'd go with Klein's. Their data cable stuff is very good.

u/quentech · 0 pointsr/Ubiquiti

This is the easiest way to make ethernet cables:
https://smile.amazon.com/gp/product/B00939KFOU

Costs a bit more, but pass through connectors are so much nicer to do.

I really think Cat8 is overdoing it.

Cat 5E is usually just fine, and cheaper

https://smile.amazon.com/gp/product/B001AZLS6Y

https://smile.amazon.com/gp/product/B0034B3KYU

Cat 7 is plenty

https://smile.amazon.com/Platinum-Tools-Connector-Clamshell-100024C/dp/B07B1K7M9X

https://smile.amazon.com/Platinum-Connector-100pcs-Twisted-Diameter/dp/B07QD73YXJ/ref=sr_1_3