Reddit Reddit reviews PonicsPumps 800 GPH (800 GPH : 6' Cord)

We found 3 Reddit comments about PonicsPumps 800 GPH (800 GPH : 6' Cord). Here are the top ones, ranked by their Reddit score.

Outdoor D‚cor
Pond Equipment
Water Garden & Pond Pumps & Circulation
Water Garden & Pond Pumps
Patio, Lawn & Garden
PonicsPumps 800 GPH (800 GPH : 6' Cord)
COMPLETE SELECTION: We have 8 sizes & 19 models. This model has a high quality 6 foot waterproof cord. A similar model with a 16 foot cord is available. Comes with adjustable input flow-rate screen and 3 outlet adaptors for 1/2", 5/8" and 3/4" inside diameter tubing.DURABLE QUALITY: Our Polished Aluminum Oxide Ceramic Impeller Shaft insures long pump life because it is non-corrodible and more than 3 times as hard as stainless steel. Epoxy Resin Encasement of key internal motor components prevents unwanted conductivity and corrosion of metal parts. This pump incorporates a magnetic wet-rotor design, so there is no seal to fail that would damage the pump motor.EFFICIENT: Neodymium Iron Boron (NdFeB) Magnets are used in all our electric motors because they are the most powerful permanent magnetic materials commercially available and increase energy efficiency. Water-Lubricated Nitrile Bushings are used because they possess a very low coefficient of friction, have inherent vibration-dampening qualities and are non-polluting.SAFE & EASY: Safe for fish with no exposed copper and oil free. Easy to clean with no tools required to disassemble and clean filter/impeller. Our SJTW Electric Cord is waterproof, 18# gauge copper wire, molded plug with ground, heavy duty flexible vinyl jacket, resists oil/grease/moisture, abrasion resistant and very good flexibility at all temperatures.SPECIFICATIONS: Salt or fresh water ready with flow Rates of 793 Gallons Per Hour (GPH) @ 0' Lift; 775 GPH @ 1' Lift; 761 GPH @ 2' Lift; 726 GPH @ 3' Lift; 687 GPH @ 4' Lift; 660 GPH @ 5' Lift; 608 GPH @ 6' Lift; 528 GPH @ 7' Lift; 449 GPH @ 8' Lift; 330 GPH @ 9' Lift; 211 GPH @ 10' Lift; 79 GPH @ 11' Lift; Max Lift - 11' 6". Dimensions are 4.84" x 2.72" x 3.82". 120VAC - 60 WATTS - 60Hz. 1 year limited warranty when sold by FasterHarvest (previously PonicsFarms)
Check price on Amazon

3 Reddit comments about PonicsPumps 800 GPH (800 GPH : 6' Cord):

u/TrustButVerifyEng · 6 pointsr/aquaponics

The most important rule about pumps: there is no such thing as a "xxxx gpm/gph" pump. For every pump, flow is dependent on resistance (or back pressure). So you need to know both in order to select a pump successfully.

So, Back pressure - also called head - think resistance

This has two components:

  • static resistance: this comes from the vertical height you have to overcome. This is the 8' you listed.

  • friction or dynamic resistance: this is a tough component because it depends on the length of pipe used, size if pipe, and flow. And since it is flow dependent that makes it dynamic.

    In general, I recommend taking the static height and adding at minimum 5' to that for the dynamic head.

    Now you have an effective height that your pump will work against.


    Next you need to determine how much flow is required. I've always been told between you want to move your total system volume between 1-2 times an hour. So my philosophy is to pick 2 times an hour, and if I messed up my resistance part then I have some wiggle room to make sure I end up with at least 1 time an hour.

    So given all of that you want to find a pump that can move 400 gph (gallons per hour) at a height of roughly 13'.


    Now, neither of the pumps you linked to have any kind of flow chart, which is a red flag in my book. Any pump manufacturer worth the purchase should publish this and make it easy to find.

    For example, this pump shows for all their models what the flow is at various heights (last picture). Find a pump that shows this information. Unfortunately this brand doesn't have one large enough for you.

    They also show the power consumed. This is measured in watts. You want to compare pumps in either watts or Horsepower. 1 horsepower is roughly 750 watts.

    The hz your mention has to do with where you live. Generally the US has 60hz and Europe has 50hz power. Some devices may only be designed to work on one or the other.
u/djwonderful · 2 pointsr/aquaponics

It depends on the height you are trying to lift the water too.

Here is the last pump I bought:
https://www.amazon.com/gp/product/B006M6MSHE/ref=oh_aui_search_detailpage?ie=UTF8&psc=1


I was running it up 6 feet, so I was getting about 600 gallons per hour. There is a good chart on that product page that can clue you in for what you need specifically.

u/knowitallz · 1 pointr/Homebrewing

This one is probably better PP80006: 800 GPH High Lift Pump, Waterfalls/Ponds/Vertical Hydroponics/Aquaponics - 6' Cord https://www.amazon.com/dp/B006M6MSHE/ref=cm_sw_r_other_awd_w9yCwbQRG5NZH