Reddit reviews PORTER-CABLE Angle Grinder, 6.0-Amp, 4-1/2-Inch (PC60TAG)
We found 6 Reddit comments about PORTER-CABLE Angle Grinder, 6.0-Amp, 4-1/2-Inch (PC60TAG). Here are the top ones, ranked by their Reddit score.
11000 rpm for high speed material removalDurable 6 A motor powers through jobsite tasks with easeCast metal gear case increases jobsite durability and tool longevity
According to /u/meangrampa it cost about 75$.
25$ for the angle grinder.
80$ for the drill press
30$ for the vice
And then you have tools you can use for other stuff too.
But let's be real, anyone who needs a square broach already have at least the drill and the vice.
This... but a wire brush on an angle grinder (even a cheap one like:
http://www.amazon.com/PORTER-CABLE-PC60TAG-6-0-Amp-2-Inch-Grinder/dp/B004X5NNGG/ref=lp_552812_1_1?s=power-hand-tools&ie=UTF8&qid=1457450934&sr=1-1) will work better and faster then on a drill.
Where there are chips out on the left one, you should probably radius the edges just a little so that you don't get more metal chipping off.
for the wire brush I would suggest something like:
http://www.amazon.com/Osborn-33467SP-Knotted-Stainless-Diameter/dp/B00QK979UO/ref=sr_1_14?s=power-hand-tools&ie=UTF8&qid=1457451106&sr=1-14&keywords=wirebrush+cup+5%2F8
Twisted wire brushes are very aggressive, so you won't need to work very hard to get the rust off... but at the same time wont do more then polish the steel. Make sure you really have proper eye protection on when you wire brush (or really do anything in the smithy)... wire brushes can throw tiny little bits of wire at high speeds!
These look like two really nice anvils. I'm curious what the makes and weights are... If you did not thank who ever gave you these in a very dramatic way, you should! ... even if you did, you probably should again. These are really nice anvils!
If hollow, give it a try, but I'd be surprised if it isn't steel rod (they're not thick enough to support the weight of a body otherwise. Use a hacksaw, or upgrade to a grinder with cutoff wheel. If you're handy, it won't be the last time you use this inexpensive and robust tool. The Harbor Freight version is 10 bucks.
Amazon!
NOTEPORTER-CABLE PC60TAG 6.0-Amp 4-1/2-Inch Angle Grinder is also on sale for $ 21.99
This is the angle grinder I have: Porter Cable PC60TAG
And these are the cutting disks I bought for it: DeWalt DW8061B5 Cutting Wheel
Will be cutting O1, D2, 1055 High Carbon, and, eventually, Gucci shit like CPM S35VN, all prior to heat treating.
Safe?