Reddit reviews PORTER-CABLE C2002-WK Oil-Free UMC Pancake Compressor with 13-Piece Accessory Kit
We found 10 Reddit comments about PORTER-CABLE C2002-WK Oil-Free UMC Pancake Compressor with 13-Piece Accessory Kit. Here are the top ones, ranked by their Reddit score.
Constructed with a pancake style tank for optimal stabilityProvides longer air tool performanceProduct dimensions: 18.3 x 18 x 19 inchesIncludes 13 piece accessory kit. Contains a 6 gallon capacity150 psi max tank pressure stores more air in the tank for longer tool run times2.6 SCFM at 90 psi allows for quick compressor recovery time, per ISO1217Air coupler and plug are factory installed on the air hose to save user labor and to prevent leaks6-gallon pancake-style tank for stability includes water drain valve and rubber feetLow-amp 120-volt motor starts easily in cold weather or with an extension cordEquipped with a durable oil-free pump for long life and no maintenanceShroud, handle, and console cover protect vital components and make unit easier to carry
Bought the Dewalt powertool kit and then canceled it, I need something like that, but would rather a different brand.
Tried to buy a dashcam but the deal was full, and ended with me sitting on the waitlist.
Very commonly used all-in-one kit for a pancake style compressor. Good for if you just want to order it and have it come with everything you need for basic usage, you might want the coupler set if you want to use different heads though, I would get it even if you probably wont because it's only $7 and you might as well.
Compressor kit:
http://www.amazon.com/PORTER-CABLE-C2002-WK-Oil-Free-Compressor-Accessory/dp/B000N5UHK0
Coupler set:
http://www.amazon.com/TEKTON-4725-Connect-Coupler-5-Piece/dp/B0037JHOFU/
As for not damaging stuff with it, just know the power of how much PSI is coming out of it. There's an adjustment (knob?) on it so you can tune it but you should still pretty much always stand a few feet away from whatever you're shooting at, obviously less with lower pressure.
PLEASE BE SURE YOU BREAK THE AIR COMPRESSOR IN FIRST
Here's the procedure for the one I mentioned, from the manual:
Break-in Procedure
Risk of Unsafe Operation. Serious damage may result if the following break-in instructions are not closely followed. This procedure is required before the air compressor is put into service and when the check valve or a complete compressor pump has been replaced.
NOTE: this is sort of counter-intuitive as you want the valve to screw UP toward the tank - giving the appearance of being closed when it's actually open. You will quickly realize whether you're right or not because you WILL hear the air blowing out the valve. No blowing air? Turn the screw the other way.
The compressor is now ready for use.
Bottom line: open the drain valve to prevent pressure from building up.
When you turn on the compressor, it will blow air out the valve.
Run for 15 min. Basically a "dry run." No pressure.
After 15 min, screw the valve the other way to close it and let pressure build up until it shuts off.
You're all set.
I found 0.7 SCFM @ 90PSI on the Home Depot website for that model. An example of a more general purpose compressor for nailing and such would be this Porter Cable C2002 from Amazon with 6 gallon capacity and 2.6SCFM @ 90PSI. I can't vouch for that model but after a bit of research it's what's on my shopping list for the next time I need to do a lot of nailing.
So, I have a smaller compressor at home for tools and the such, this guy
https://www.amazon.com/gp/product/B000N5UHK0/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
and I have attached an airbrush regulator with filter
https://www.amazon.com/gp/product/B00171BFKK/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
Will these work good for air assist? I rarely use the compressor and would love to make it more useful ;)
Since no one else has mentioned it: I use an air compressor all the time.
i got one of these pretty much just for this purpose
http://www.amazon.com/PORTER-CABLE-C2002-WK-Oil-Free-Compressor-Accessory/dp/B000N5UHK0/ref=sr_1_1?ie=UTF8&qid=1416286379&sr=8-1&keywords=6+gallon+air+compressor&pebp=1416286383267
PORTER-CABLE C2002-WK Oil-Free UMC Pancake Compressor with 13-Piece Accessory Kit https://www.amazon.com/dp/B000N5UHK0/ref=cm_sw_r_sms_c_api_e7UhAbM93JRYS
I'd go with this one, for $125 you get the same specs as the ones you listed plus a hose and a few attachments. If you already have that stuff then you could get it without them for $99.
PORTER-CABLE C2002-WK Oil-Free UMC Pancake Compressor with 13-Piece Accessory Kit https://www.amazon.com/dp/B000N5UHK0/ref=cm_sw_r_cp_apa_4jqHxbTDWKKRP
Not sure, my Tacoma has a power inverter and outlet in the bed
I'm thinking this...
Go for a "pancake" or "hot dog" style. They are sufficient for airing up tires and occasional tool use.
Pancake style
HotDog style
Also, in my experience, electric paint rollers are much less hassle for housepaint. Less clogging and easier cleanup.