Reddit reviews POWERTEC 71002 Abrasive Cleaning Stick for Sanding Belts & Discs | Natural Rubber Eraser - Woodworking Shop Tools for Sanding Perfection
We found 17 Reddit comments about POWERTEC 71002 Abrasive Cleaning Stick for Sanding Belts & Discs | Natural Rubber Eraser - Woodworking Shop Tools for Sanding Perfection. Here are the top ones, ranked by their Reddit score.
INCLUDES: (1) Abrasive Cleaning Stick 8-1/2" x 1-1/2 " x 1-1/2" Large SizeFUNCTION: Extends the lifespan of your sanding disc, belts and other sander equipment by removing sawdust, pitch, gum, glue and other residue without damaging the gritPREMIUM: Made with a professional grade all-natural rubber construction, this sanding eraser is designed for durability and comes with an extended length and sizable girth to take on most of your sandpaper cleaning jobsEASY TO USE: Hold eraser stick against your selected abrasive to remove the built-up, clogged dust, debris and particles – returning a like-new look to your sanding surfaceVERSATILE: Ideal for cleaning sanding belts, disc sanders, drum sanders, skateboard grip tape, rubber bottom shoes (Not intended for plastic or use on conveyor-feed type sanders)
I kind of assumed he'd use a belt sander cleaning block like this, which is basically just a big eraser. That's what I did before I sold my Landyachtz Evo.
As far as remote disconnections with the V2, I've never had it lose connection once.
The only other suggestions I would have are to pick up some bash guards from flatland-3D to preserve the ends of your board, and compressed air to clean hard to reach areas on the board.
Hope that helped! Have fun!
As long as its still grippy it should be fine. I've had some ugly ass grip before, mud and dirt stuck everywhere but it still worked so I kept it.
The Grip Gum u/tangoRhubarb mentioned can be found for cheap if you look up "Sanding Belt Cleaner".
Here's it on amazon: https://www.amazon.com/POWERTEC-71002-Abrasive-Cleaning-Stick/dp/B00AJW0CY8?ref_=fsclp_pl_dp_1
Agreed. You get more for your money, e.g.: https://www.amazon.com/gp/product/B00AJW0CY8/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1
I use a dry, stiff-bristled brush to get the big chunks, and one of these for the rest.
Soap and water would probably be ok if you're careful about it, but it's kind of unnecessary.
Not really sure what your budget or needs are, but a palm sander (also called corner or detail sander) might work for you. They are relatively inexpensive and the sanding pads are too. I've used a Harbor Freight one almost daily for many years for many different types of projects.
Here's a decent one from Amazon
Whatever sander you decide on, an essential add-on is a gum rubber sandpaper cleaner. I went for years always replacing the sandpaper when it got clogged until I discovered that I could clean them over and over, and save a lot of money.
Hope that helps!
Get this (same as Grip Gum) to clean the grip tape: http://amzn.to/2qu0iSr
You just run it over the grip tape like an eraser and it removes embedded dirt.
Give one of these a try.
Highly recommend you get a stick to clean ur tape. You'll be happy you did 😁 I use that stick to get the gunk off and add a little water if it's really in there.
POWERTEC 71002 Abrasive Cleaning Stick, 8-1/2" https://www.amazon.com/dp/B00AJW0CY8/ref=cm_sw_r_cp_apa_i_NQ68AbRJG701J
POWERTEC 71002 Abrasive Cleaning Stick for Sanding Belts & Discs Natural Rubber Build | For Woodworking Shop Sanding Perfection | A"Must Have" Sanding Accessory https://www.amazon.com/dp/B00AJW0CY8/ref=cm_sw_r_cp_api_i_eSVSDb217ERJ1
Get this, you will never use all of it and it’s only 10$
Recently got this and it works awesome!!
I had dried bourbon (don’t ask) that I thought stained the grip tape but this pulled it right off.
POWERTEC 71002 Abrasive... https://www.amazon.com/dp/B00AJW0CY8?ref=yo_pop_ma_swf
POWERTEC 71002 Abrasive Cleaning... https://www.amazon.com/dp/B00AJW0CY8?ref=yo_pop_ma_swf
Been using this works great. Little elbow grease and one of these and the tape will be looking brand new.
Abrasive cleaning sticks are pretty commonly used https://www.amazon.com/gp/product/B00AJW0CY8/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
I recently purchased this cleaner: https://www.amazon.com/dp/B00AJW0CY8
I was able to clean dirt and mud from my grip tape in around 10 minutes and make it look like new ;)
For $9.5 you will get probably like 20-30 through cleanups of both pads.
Yup a big ass rubber stick and a bunch of sweat brings most of it back, some mud/dog shit spots(uncleaned Boosted #2 with 4k miles) won’t come out but it looks pretty good. I’ll take a pic of both boards I just cleaned them the day I posted the wheel comparison picture.
https://www.amazon.com/POWERTEC-71002-Abrasive-Cleaning-Stick/dp/B00AJW0CY8/ref=sr_1_1?ie=UTF8&qid=1499737629&sr=8-1&keywords=belt+sander+cleaner
POWERTEC 71002 Abrasive Cleaning Stick for Sanding Belts & Discs Natural Rubber Build | For Woodworking Shop Sanding Perfection | A"Must Have" Sanding Accessory https://www.amazon.com/dp/B00AJW0CY8/ref=cm_sw_r_cp_api_i_r2xGDbVMCGHSE