Reddit reviews Predator Cycling Carbon Fiber 6" x 50"
We found 1 Reddit comments about Predator Cycling Carbon Fiber 6" x 50". Here are the top ones, ranked by their Reddit score.
Ideal for composite repair for bicycles, surfboards, fishing poles, hockey sticksAesthetic carbon fiber for car or bicycle repairWorks with Carbon Fiber Repair Kits and DIY projects
I worked in a ski shop and I have fixed a couple of delaminated snowboards with epoxy and I know it is not the same application but it is very strong. Tape off the work area, Mix the epoxy, pry it open. and get as much of that in there as you can. Use the whole tube or two if you have to. The board is hollow because that is how they are heat pressure molded into shape. Yo can squirt the mixture into a ziplock bag and mix it in there then cut off the tip of a corner of the ziplock bag to make it like one of those cake decorating frosting bags so you can squirt it in the board. You only get one good shot at it once it is mixed. You can use a couple of carbon strips like a bandaid to finish it off once the inside dries. Wear latex gloves work fast and it dries glossy. Fine sanding and clear coat spray to make it shinny again if you like.
Piece of cake
Edit:
I just found this patch for you.
Maybe if you get enough epoxy in there and just clamp it down you wont need the carbon patch.
Here are bigger bottles of epoxy
If use the carbon patches you can shrink wrap it in this to to dry tight and hard.
If all the electronics still works I would try to repair it just to keep me riding, at least for now. If you do it right you will not notice.