Reddit reviews Profile Design Threadless Size Converter (1" - 1 1/8")
We found 13 Reddit comments about Profile Design Threadless Size Converter (1" - 1 1/8"). Here are the top ones, ranked by their Reddit score.
Converts all quill style forks to use threadless stemsConverts 1 inch to 1-1/8" threadlessWeight: 0.8 ounce
>into
>https://www.amazon.com/Profile-Design-Threadless-Size-Converter/dp/B0028N14GQ
The product title portion of the URL can be dropped also if you're going for the shortest link:
https://www.amazon.com/dp/B0028N14GQ
I used a 1” threaded to 1 1/8” threadless adapter. This allowed me to use any modern handlebars. Below is a link to the one I used.
Profile Design Threadless Size Converter (1 - 1/8-Inch) https://www.amazon.com/dp/B0028N14GQ?ref=yo_pop_ma_swf
or keep using your old fork with an adapter like this: https://www.amazon.com/Profile-Design-Threadless-Size-Converter/dp/B0028N14GQ
Velo orange has one thats really expensive but there are $25-30 options on ebay and Amazon.
https://www.amazon.com/Profile-Design-Threadless-Size-Converter/dp/B0028N14GQ/ref=asc_df_B0028N14GQ/
​
Or get an adapter to run a modern stem for much cheaper
If there's nothing wrong with your fork, and you'd like to keep using it, you can get a threadless/quill adapter (like this) and use it with a modern stem.
Depends on the frame. My Trek took a 1 1/8 threaded fork which meant I could swap the fork/headset/stem for a threadless one. You're fork is probably 1" threaded so no go. There are a few work arounds like a threadless stem converter, but generally you're stuck based on your frame/fork.
Profile Design Threadless Size Converter (1" - 1 1/8") https://www.amazon.com/dp/B0028N14GQ/ref=cm_sw_r_cp_apa_i_KkkWDbCG21VE2
The adapter is a Profile Design and the stem manufacturer escapes me right now, and I'm too lazy to check, but a moderately priced stem will do the trick.
The Drops are Soma Portolo and are extremely rad, I can't say enough good things about them.
Levers and brakes are tektro and the shifters are micro indexed on the rear and friction on the front (I forget the manufacturer there as well).
Overall the changes have made a world of a difference on that bike.
I normally ride with Resist Nomad slicks, but then some snow and ice came so I switched over to some Suomi Studs and then the snow melted.
Hey all,
Does anyone know what stem size is compatible with a 53cm 2017 Kilo TT Pro? I can't find this information anywhere.
I want to get this kind of stem (I've already tried 100mm and 90mm because I read those sizes were compatible online):
Thanks!
**EDIT: I can see I was horribly misguided when trying to fit this stem onto the tt pro. It looks look I need some kind of stem adapter - would this work?
You don’t have many options. Either buy the adaptors, some version of this thing or something really nice like this or a cheap one like this.
If you want to make some mods that will be reversible, you can get a quill stem converter (https://www.amazon.com/Profile-Design-Threadless-Size-Converter/dp/B0028N14GQ), a short mountain bike stem (50-60mm), wide mountain bars, take off the kickstand, and then add some better pedals. I did this to my '91 RockHopper and it made it fun to ride and I was able to convert it back to original. Also, ditch the rack and crate unless you really need it but it looks like it's pushing your seat way too far forward.
Just get a quill to 28.6 adapter and you can use a standard stem to run 31.8 bars https://www.amazon.com/Profile-Design-Threadless-Size-Converter/dp/B0028N14GQ/
I saw a video where the guys suggested this!
Profile Design Threadless Size Converter (1" - 1 1/8") https://www.amazon.com/dp/B0028N14GQ/ref=cm_sw_r_cp_apa_i_Z0ODDbC2E345N
You probably need a stem adapter, not a shim. This will allow you to use any modern stem.
Profile Design Threadless Size Converter (1" - 1 1/8") https://www.amazon.com/dp/B0028N14GQ/ref=cm_sw_r_cp_apa_i_kdpDDb90D68MG