Reddit Reddit reviews RCA Cable, iXCC 6ft Dual Shielded Gold-Plated 3.5mm Male to 2RCA Male Stereo Audio Y Cable

We found 53 Reddit comments about RCA Cable, iXCC 6ft Dual Shielded Gold-Plated 3.5mm Male to 2RCA Male Stereo Audio Y Cable. Here are the top ones, ranked by their Reddit score.

Audio & Video Accessories
Audio & Video Cables & Interconnects
Accessories & Supplies
Electronics
Audio Cables
Stereo 1/4-inch & 1/8-inch Jack Cables
RCA Cable, iXCC 6ft Dual Shielded Gold-Plated 3.5mm Male to 2RCA Male Stereo Audio Y Cable
iXCC: Trusted by 5 million+ people for high quality innovative products.Exceptional Sound: Built with dual-shielding, high-quality polished metal and corrosion-resistant gold-plated connectors making it less susceptible to outside interference.(EMI protection)Bi-Directional: Seamlessly transmits stereo audio for high quality sound. Separated with common red and white male RCA plug colors. RCA connectors have easy grips for plugging and unplugging while ensuring reliability.Tangle free design makes using and storing the cable cord easy. No need to take off your bulky protective cases for smartphones or tabletsWhat you get: iXCC 3.5mm to 2RCA male 6ft Cable *1. Warranty: 24-month.
Check price on Amazon

53 Reddit comments about RCA Cable, iXCC 6ft Dual Shielded Gold-Plated 3.5mm Male to 2RCA Male Stereo Audio Y Cable:

u/MiaowaraShiro · 8 pointsr/diyaudio

This sounds like a stereo/mono conversion issue. The melody for example might play on just the right channel and the drums are in stereo. If your mic input is mono it's probably not getting both channels. You should be connecting your PC via the RCA input jacks on the back of the amp, not the mic input.

You'll need a cable similar to this:
https://smile.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B019D048XC/ref=sr_1_3?ie=UTF8&qid=1520966127&sr=8-3&keywords=3.5+mm+rca

u/deplorable-d00d · 4 pointsr/hometheater

Analog is the cheapest, fastest, and easiest.

Get a 3.5mm to RCA (stereo) Y adapter in the length you need:

https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B019D048XC/

Problem is, you may get buzzing from poor grounding, in which case you'll need to "lift" (isolate) the ground loop -

Plug something like this in-line, after the Y adapter, before the stereo AUX RCA inputs -

https://www.amazon.com/InstallGear-Ground-Isolator-Noise-Filter/dp/B077Y5DLBB/

or a newer type (plug this into the computer first, then that Y adapter):

https://www.amazon.com/REIIE-Ground-Isolator-Bluetooth-System/dp/B01JUOWB2Q/


u/Johnlemonx · 3 pointsr/BudgetAudiophile

You need one of these then https://www.amazon.com/dp/B019D048XC

But the better option for you is getting a set of powered speakers.

u/tumescent4science · 3 pointsr/hometheater

It looks like that particular model of receiver is audio only. I don't see any optical connections so analog RCA is the only way to go. The Sony TV should have a headphone output along the side. The red and white input on the receiver will need to connect to that headphone connecter on the TV. This will require a cable such as this: https://www.amazon.com/dp/B019D048XC/ref=cm_sw_r_cp_api_.KAAzbJCR2FBK

To really take advantage of digital audio, you would need to upgrade the receiver.

Edit: I see that you tried the RCA connection from the TV to the receiver. The composite connections on the TV are going to be audio IN. Not OUT. The headphone port on the TV will be the only way to send audio out to that receiver. Without HDMI or optical capability on the receiver, this tends to get complicated.

u/agent_of_entropy · 3 pointsr/techsupport

You need one of these.

u/BTsBaboonFarm · 2 pointsr/vinyl

I'd encourage you to at least consider other options before pulling the trigger on an LP120. At the price point ($365, assuming CAD, for a refurbished unit) is still too high for a used LP120.

If recording to your computer is something you'd like to do, you can always get something like this if your PC has a line-in/mic port (and if not you can pick up a cheap RCA to USB).

You're going to be paying more for that USB feature on a turntable when you could reasonably pull it off yourself with a cheap accessory or two.

u/MHMoose · 2 pointsr/piano

Here is how I can hear both my computer sound and Yamaha P71 sound through my headphones.

  1. I bought this device on Amazon.

  2. I bought this cable on Amazon.

  3. For the cable, the stereo end goes into your keyboard, the two RCA plugs go into the device above.

  4. The device above connects to your computer to a USB port.

  5. Your headphones plug into the device. You can then hear your keyboard and computer at the same time, like if you wanted to play along to a backing track on YouTube or something.

    Hopefully that is helpful. Took me a while to figure out but it works really well.
u/cctvcctvcctv · 2 pointsr/BudgetAudiophile

Get a 3.5mm to RCA cable and wire the green audio jack on your mobo (right column, position 2) to the line-in on your amplifier. Make sure to set your soundcard to output stereo. Done.

Cable: https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B019D048XC

You are right about speakers. Just need some speaker wire - strip the ends and hook it up. Your Onkyo manual will cover this. Can get banana plugs if wanting to get fancy or need easy way to connect and disconnect.

u/Roppmaster · 2 pointsr/headphones

>Hello, I've not been into hi-fi audio before but since I got hold of some decent pair of headphones I'm interested in beefing them up.

Is volume insufficient from your onboard audio?

>I've heard good things about the Atoms Amp but I'm not sure how to hook it up to my PC, and from what I can tell it does not come with any cables?

https://www.amazon.com/dp/B019D048XC/ref=cm_sw_r_cp_apa_i_M0kVCbKQ4CHN6

>My motherboard, Strix Z370-E I heard has decent enough onboard sound so I don't need an external dac but it apparently also has an onboard amp that I don't want running through. Would the Atoms bypass it or do I need to disable it somehow?

You don't need to disable your motherboard's op-amp. You'd need a dedicated DAC if you wanted to bypass your onboard audio completely.

u/theninjaseal · 2 pointsr/diyaudio

If you're handy with a soldering iron then you can get this

2 Pack CESS 2.5mm Mono TS unbalanced male plug black cable connector https://www.amazon.com/dp/B01FPRAID6/ref=cm_sw_r_cp_api_u8NkybN6ZCBJV

And any 3.5mm stereo connector to dual RCA, like this

RCA Cable, iXCC 6ft Dual Shielded Gold-Plated 3.5mm Male to 2RCA Male Stereo Audio Y Cable https://www.amazon.com/dp/B019D048XC/ref=cm_sw_r_cp_api_N-NkybWXZVSV8

These things are available everywhere in just about any length and style. They used to be included in all sorts of electronics during the transition period between RCA and eighth inch stereo Jack's.

Anyways-

Cut off the RCA connectors and solder the outside wire (the RCA cable should have one inside the other) to the "sleeve" contact of the 2.5mm connector. Solder the inside wire to the "tip" contact. Repeat for the other side. Now you have made your own cord for like ten bucks and you can repair it easily if something goes wrong.

If not, you can use a little converter for RCA to 2.5mm mono jack, like this. The phono jack end has 3 contacts for some reason but it should work just the same. And you don't have to work with molten metal.

Monoprice 107145 2.5mm Stereo Plug to RCA Jack Adaptor, Gold Plated https://www.amazon.com/dp/B003R6WVDS/ref=cm_sw_r_cp_api_2cOkyb3DCE6KQ

u/chdabre · 2 pointsr/somethingimade

just a small adapter or a RCA <> 1/8" cable. They're very common.

u/currly30 · 2 pointsr/ZReviews

The xDuoo XD-05 is a great portable and desktop amp for the price. It does have a fixed AUX out on the back which is meant for connecting to other amps.

Open this link and scroll to the bottom it will give you a connection diagram.

In order to use the AUX output with an SMSL speaker amp you will need to buy a AUX to RCA cable. Something like This and be using the USB input.

Then all you have to do to run your speakers is turn on and off your Speaker amp. The AUX out on the back is a fixed out so the volume knob on the front doesn't effect the output on the back.

u/create-a-useraccount · 2 pointsr/buildapcsales

If you're connecting your computer to these speakers, you will probably need a 3.5mm to RCA cable like this: https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B019D048XC

Connect computer to amplifier. Connect speaker wires from amp to speakers (provided with the speakers) and you're set.

u/GbMaxSE · 2 pointsr/hometheater

Your Mackies take an RCA Input. SO you need to split that RCA Input into three connections. This will become quite convoluted and require LOTS of adapters, as it just isn't what these speakers were meant for.

You could use one of these and then run your turntable in with RCAs (you might require a pre-amp), you can use your 3.5mm jack output on your pc with a 3.5mm male to rca male adapter like this and a second one of those adapters to go from echo to splitter.

With this setup you could play any of those devices on the Mackies, but only one at a time

u/cf18 · 2 pointsr/buildapc

You need three 3.5mm to RCA cables, like this:

https://www.amazon.com/vipexcellence8-Audio-Splitter-Stereo-Computer/dp/B01FZ78DZ6/ref=sr_1_1?ie=UTF8&qid=1504968755&sr=8-1&keywords=3.5mm+to+rca

That's the cheapest one on Amazon, you may want different length or higher quality ones, e.g.

https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B019D048XC/ref=sr_1_1?ie=UTF8&qid=1504969472&sr=8-1-spons&keywords=3.5mm+to+rca&psc=1


PC Speaker out (Green) -> Speaker FL+FR

PC Center/Sub out (Orange) -> Speaker C+SW

PC Rear out (Black) -> Speaker SL+SR

On speaker remote, set input to DVD. On PC, run Realtek control panel app to setup 5.1 sound and test each speaker.

u/1point5volts · 2 pointsr/BudgetAudiophile

> How is the setup on the surround ones?

For the 6ch (one channel is the subwooker) mode I'm using I just have 3.5mm to rca cables running from my computer to the receiver. For this particular mode it expects all of the set up to be done on the source device. So there's really nothing to do on the receiver except plug everything in to the right places.



IT SOUNDS AMAZING. totally overkill for a desktop set up lol.

u/lore_wrecker · 2 pointsr/cassetteculture

On the back of the deck, there should be two RCA connectors labeled Input, and two RCA connectors labeled Output. Or something similar. To record from your phone, you'll need an auxiliary to RCA connector, something like this. Plug the auxiliary into your phone, and plug the RCA connectors into the Input section on the deck. That should do it.

u/jasrajsokhi · 2 pointsr/podcasts

Another way is to simply bypass your interface. I have the xenyx 1202 (not fx ) and this is the method I use. You can split the single jack on your computer using this cable ( https://www.amazon.com/Kingtop-Adapter-Tablet-Headsets-Version/dp/B01I3A47I4/ref=sr_1_6?keywords=y+splitter+head+mic&qid=1559124001&s=gateway&sr=8-6 )


And then use a RCA cable ( https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B019D048XC/ref=sr_1_8?keywords=rca+cable&qid=1559123966&s=gateway&sr=8-8 ) to connect the RCA out from your mixer to mic in port of the splitter cable into your mac.

u/Lan_Del · 2 pointsr/discordapp

Yes, if you have a two channel RCA to 3.5mm cable, then you can run it out the back of the focusrite and into your headphone jack/line in. Set your logic input and output to the focusrite, and set your discord input to the headphone jack/line in.

hope this shitty paint drawing helps to picture it

u/Emerald_Flame · 2 pointsr/buildapc

That has PCIe soundcard that is built into the motherboard. That's what those 6 3.5mm jacks on the rear IO panel go to.

You just need a 3.5mm to RCA cable like this: https://www.amazon.com/dp/B019D048XC/ plug it into one of the outputs, then plug the RCA jack side into your receiver, and it'll work and be way higher sound quality then bluetooth.

u/picmandan · 2 pointsr/BudgetAudiophile

I think you're confusing things slightly. You say you want to run your Echo from your speakers. However, I think what you want is to play your Echo on your new speakers. Yes?

If that's the case, it's not a good idea to merge the two sources (the Echo and the PC) with a splitter. Splitters are designed to split the signal, not merge the signal. You need some resistance to prevent one source from driving and damaging the other source.

What you need instead is an Input Selector. Here's a reasonably well regarded all RCA model for $14 in the US store, from Optimal Shop. You may be able to find a similar with auxiliary (3.5 mm) inputs and outputs. However, it's not necessary, you would just need a 3.5 mm to RCA adapter such as this one to go from your Echo to your Input Selector.

u/GearPipe · 2 pointsr/podcasting

I would use a mini to dual RCA cable, plugged into the 2-Track In. You could also use a mini to 1/4" and plug it into an extra channel, but the 2-Track In keeps those free for more mics.

u/tominabox1 · 1 pointr/vinyl

It has a 3.5mm line in jack, so you'd need a cable like this

u/Ravatu · 1 pointr/BudgetAudiophile

I see. I'd really like to use the balanced cords in the configuration, because I plan to leave the speakers on and don't want to deal with interference while there isn't music playing. This is the cord that I'm using for the sub. How do you transfer unbalanced stereo to balanced L/R only signal?

u/demevalos · 1 pointr/headphones

I believe you can use a 3.5mm to RCA cable and plug the 3.5mm side into the line out on the Fulla (second from the left here) and run the RCA to the back of the magni

u/Graceful_cumartist · 1 pointr/vinyl

So how do you connect the rca? Well there are just normal audio jack cables that split in two and then just a matter of adding 6,3 jacks to that. For example [this] (https://www.amazon.com/gp/aw/d/B019D048XC/ref=mp_s_a_1_1?ie=UTF8&qid=1523644953&sr=8-1-spons&pi=AC_SX236_SY340_QL65&keywords=rca+to+3.5mm&psc=1) to this and then 6,3mm jacks to the monitors.

u/diehllane · 1 pointr/PSVR

I guess it's technically a converter and not a splitter.

It changes the audio from digital (from the console) to analog (for the vest).

EDIT: You may need one. It doesn't need to be that one. Any digital to analog audio converter should work. I'm not 100% sure but I am trying to figure that out for you real quick.

https://www.amazon.com/EAKAI-Digital-Optical-Converter-Licensed/dp/B01H4XC3DC/ref=sr_1_1_sspa?ie=UTF8&qid=1505351717&sr=8-1-spons&keywords=digital+to+analog+audio+converter&psc=1

There's one for under $15 on Amazon. There are plenty more available for the 15-20 range.

EDIT 2: It looks like you will need one as the vest says it needs a 3.5mm input. I don't see where it includes the required cable even if you buy the vest bundle from them. You'd need to pair this converter with an RCA to 3.5mm cable like this:

https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B019D048XC/ref=sr_1_1?s=electronics&ie=UTF8&qid=1505351978&sr=1-1&keywords=male+rca+to+male+3.5mm

u/ThePinkOne0 · 1 pointr/estim

I understand tri-phase more now, thanks!

I'm using the Smartstim's Midistim design, which I haven't built yet so I'm not sure how it all works. I've read the guide and have a vague understanding. But I'm not sure what you mean by output jack or wiring harness.

If you mean the 3.5mm to 2RCA cable, I think I'll get something like this.

If you mean the resistor + terminal blocks (I assume that's where electrodes are plugged in?) I'll be getting both from Allied Electronics from the p/n listed in the Allied Electronics part list at the bottom.

Here is where I'm getting my parts unless something's wrong with it. I'm listing all in case you meant something else or want to take a look at the specs.

Both these from Amazon: Amplifier and PSU

These 5 from Allied: Resistor, Transformer, Terminal Block, BLK Patch Cord, RED Patch Cord

The rest like plate and cable ties, I'll have to find in a store (I'm not familiar with any diy but I'll get it eventually).

I also read your reply in that other thread about the quality of transformers. It seems the Allied one is the same as the Zoro one in the smartstim downloaded parts list. The quality should be good then as long as nothing goes wrong.

edit: I need to find a new source for the 1 or 2 terminal blocks, Allied require a minimum of 100... I heard the terminal blocks don't need to be exact so I can get away with a variation. I found this terminal block and it might work.

u/vinayak_nair · 1 pointr/techhelp

Try using the auxilary input, the cable is included as per the listing on Amazon(Speaker). Connect to the audio out behind TV(red,white), the other end to the aux in on the speaker. 3.5 mm cable looks like the headphone jack cable.

Use this cable
https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B019D048XC/ref=sr_1_3?s=electronics&ie=UTF8&qid=1506271544&sr=1-3&keywords=rca+to+3.5

Or if you have 3.5 mm cable use the one below to convert to RCA

https://www.amazon.com/C2G-Cables-40424-Stereo-Y-Cable/dp/B001B8QUS6/ref=sr_1_3?s=electronics&ie=UTF8&qid=1506271481&sr=1-3&keywords=rca+to+3.5+female

u/Cartossin · 1 pointr/techsupport

Ok can I see the cable tip you have in the front? I think that's a headphone jack, not a composite cable. You can jam those in a composite cable and maybe it'll line up enough to work maybe, but it won't be stereo. You probably need one of these: https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B019D048XC/ref=sr_1_3?ie=UTF8&qid=1502760584&sr=8-3&keywords=audio+y+cable
; but if you take a picture of both ends of that green cable, I'll tell you for sure.

u/Hoody156 · 1 pointr/headphones

Hii everyone!

I am absolutely new to the high end headphone scene and would love it if you help out a noob :)

I recently managed to get on the drop for Sennheiser HD6XX from Massdrop and can't wait for it to arrive!

I'll mostly listen music from my MacBook Pro. I know I need a good amp/dac to get the most out of this pair of headphones.

As such, I just ordered a Schiit Magni 2 as I had a limited budget and could only spend on either a DAC or an AMP.

Now my question is, is there something else I need to purchase to make this a complete setup? And, will the cable in the link work for me to connect the amp to the laptop?

Thank you in advance! :)

https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B019D048XC/ref=cm_cr_arp_d_product_top?ie=UTF8

u/HyperdeathGoatGod · 1 pointr/audiophile

I'm trying to connect a pair of JBL 305 powered monitors and an SVS PB-2000 sub to a simple 3.5mm laptop. I've tried researching on my own but I have no idea how the RCA inputs are supposed to connect together.

I imagine I would connect these to connect the speakers to the sub, and then these to go from the sub to my laptop?

The SVS PB-2000 has both RCA ins and outs, so this should be possible, correct?

u/LEEMakesThings · 1 pointr/techsupport

Looks like your TV allows audio out through optical and 3.5mm ports, and your DVD system allows audio input for composite in the back. You should be able to get a 3.5mm to RCA cable and match those connections.

To expand on this, on page 30 in this manual for your DVD system, LINE 4 IN will allow you to connect an RCA/composite cable (the red/white cable) as an input, and on page 44 in the manual for your TV, it allows 3.5mm (headphone jack) connections as an audio output. You'd just need a cable like this to hook the two devices up.

u/MrEleventy · 1 pointr/headphones

If you don't have RCA jack in the back of your PC, then you'll need a 3.5mm stereo to RCA cable.

E: Something like this.

u/Beer_Is_So_Awesome · 1 pointr/BudgetAudiophile

My friend owns a pair of these Dayton B652-AIR bookshelf speakers which I think sound really great for the price. I've heard good things about the cheaper model as well. AFAIK, the only difference between these two speakers is the tweeter, and I gather that it's worth the extra money, but I haven't heard the low-end model myself. The AIR model is definitely worth it for the price.

You can power these with the little Lepai 2020 amp, or (even better) a second-hand home theater receiver if you can find one cheap. The Lepai has both a Treble and Bass knob for basic curve tweaking, and a pushbutton "pass-through" that disables them. Most receivers are likely to have more features, more power, and better tone control.

All you'll need then is an appropriate amount of speaker wire (It doesn't need to be anything fancy) and a decent 3.5mm to RCA cable

Presto Dunzo!

I know that you wanted to keep it to $80 for a new system, but if you get everything through Parts Express and it breaks $100, you'll get free shipping. Check out the cart I built.

u/blackjakals · 1 pointr/audio

What speakers are you using? You can use the Micca Origen G2 for headphones and powered speakers, but if you are using passive speakers, you will need a separate amp for that.

To connect powered speakers that already have RCA cables, you just need a dual female rca to single 3.5mm male cable adapter like this:

https://www.amazon.com/Gold-Plated-Copper-Shell-Heavy-Duty-Adapter-Extension/dp/B077DNG83N/ref=sr_1_14?ie=UTF8&qid=1537383619&sr=8-14&keywords=dual%2Bfemale%2Brca%2Bto%2B3.5mm&th=1

or just a dual male rca to male 3.5mm like this to go directly from your speakers to the DAC/Amp:

https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B019D048XC/ref=sr_1_1_sspa?ie=UTF8&qid=1537383727&sr=8-1-spons&keywords=dual+male+rca+to+3.5mm&psc=1

​

u/alf3311 · 1 pointr/hometheater

If headphones plugged into the DAC sound normal I think you can rule out any sort of down mixing problem. I strongly suspect the issue is with your cabling. There should be no quality loss going between RCA, 1/4" and 1/8" plugs just make sure you are not commingling mono and stereo parts. On the 1/4" and 1/8" plugs, mono cables will have two contacts (the tip and a sleeve, a.k.a. TS). On stereo plugs there are three contacts (the tip, a ring, and the sleeve, a.k.a. TRS). If you look at the RCA cable I linked to above, you will see it's mono, which is what you want. On the other hand if you look at a cable like this you will see it's combining two RCA plugs into a single stereo plug, which is NOT what you want.

u/DubsNamesMyKnife · 1 pointr/headphones

Hey everyone!

I was wondering if anyone has any experience hooking up a Crack with their Xbox One Controller. Last year I was running my ATH-M50 (with a Modmic) directly though my controller and that worked with no issues.

However, after building my Crack and getting the HD650, I've just tried to plug in the Crack into the 3.5 jack in the controller - but get no audio. Plugging the HD650 directly into the controller does work though - but obviously then they are not amped.

Anyone have any suggestions? I am cross-posting on /r/XboxOne and on the Bottlehead forum as well.

Please save me from resorting to using them unamped lol

Here's the RCA Cable I am using from my Crack: which works perfectly fine through my laptop and phone

u/The_Shoe_Is_Here · 1 pointr/BudgetAudiophile

I found this amp:

https://www.amazon.com/BT20A-Bluetooth-Audio-Amplifier-Integrated/dp/B07BQC7GNL/ref=cm_cr_arp_d_product_top?ie=UTF8

I think i am going to use this with a cable like the one below and just use the AUX on my PC

https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B019D048XC?ref_=fsclp_pl_dp_2

What do you think? I plan to buy a DAC in the future if I am having issues. You think this will work for what I want?

u/pedroelbee · 1 pointr/hometheater

Something like this:

RCA Cable, iXCC 6ft Dual Shielded Gold-Plated 3.5mm Male to 2RCA Male Stereo Audio Y Cable https://www.amazon.com/dp/B019D048XC/ref=cm_sw_r_cp_api_UdqZBbTNVNXG8

Just plug the two rca ends into any input: cd, dvd, blu Ray etc.

u/[deleted] · 1 pointr/audioengineering

You can connect them directly to your PC from your PC's audio output with this cable:

https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B019D048XC

​

u/the_blue_wizard · 1 pointr/audio

Make sure the 3.5mm Stereo to RCA cable is long enough to reach from the back of your computer to the Inputs on the Amps.

The one I listed is 6 feet, but you can get them at 3ft, 6ft, 9ft, 12ft, and longer.

Or in the case of this one cable that I linked to it is available in 3ft, 5ft, 10ft 15ft. Just make sure what you buy is long enough.

https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B019D048XC

https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B06XKRZKC3?th=1

https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B06XKRCK6H?th=1

u/QuipA · 1 pointr/headphones

> Can you connect the magni to a computer?

Yes, if your computer has a good oboard codec that is not noisy and features a line level output you can connect the Magni 2 directly to the PC with a cable like this

> is it worth buying the magni without the DAC

yes, for example if you have an onboard ALC1150 or already own a PCIe soundcard.

If you do not know how good the components of your PC are, just grab the Monoprice DAC/Amp combo unit.

u/kingrpriddick · 1 pointr/hometheater

Like

4x amazon.com/dp/B019D048XC

And 4x amazon.com/dp/B00NMUE2P4

And 1x amazon.com/dp/B002HPNDDW should be good

And 4x parts-express.com/dayton-audio-b652-air-6-1-2-2-way-bookshelf-speaker-with-amt-tweeter-pair--300-651

And 1x amazon.com/dp/B00AF88BRG

I think that would sound pretty great, PC and all

u/mets233 · 1 pointr/headphones

Thanks, didn't realize the sale joke =)

I currently have a FiiO E12 (portable amp), so I'm thinking about upgrading. I still need to sit down and really listen to them, which I'm so pumped about. I'm guessing I'll just need one of these to connect my Macbook to the Valhalla?

u/another_cube · 1 pointr/diysound

Alright, so first you need to confirm that your subwoofer is capable of powering speakers. It has a cord that plugs into the wall right?

Next, you'll need a way to get the signal from your phone to the subwoofer. To be flexible, you should buy this:

https://www.amazon.com/Rockford-Fosgate-Speaker-Female-Adapter/product-reviews/B00G352P2C/

The wires will plug into your subwoofer on the "input" connectors. It looks like the outer 2 of the 4 wires plug into the black tabs, and the inner two wires plug into the red tabs.

Then, you need this:
https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B019D048XC/

Obviously one side plugs into your smartphone, and the two round connectors plug into the first product.

Finally, you need to hook up two of your speakers to the subwoofer using the speaker wire. Each speaker connects to the red and black tab pair on either side of the "Output" text.

Let us know when you have it all set up and playing music!

u/SmittyJonz · 1 pointr/BudgetAudiophile

3.5mm to rca cable

https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B019D048XC

Plug it in to the computer just like computer speakers I don’t remember which color port it is

Buy the Micca MB 42X speakers not the MB42. MB 42X has a crossover and sound much better.

Speakers to the amp will be bare speaker wire or banana plugs speaker wires/cables - kind of look like RCA but different

Need 2
https://www.amazon.com/AmazonBasics-Speaker-Cable-Gold-Plated-Banana/dp/B07FDB34ZR

Or ( you will have to cut the wire and strip the ends)

https://www.amazon.com/AmazonBasics-14-Gauge-Speaker-Wire-Feet/dp/B01D5H8XOY

I run Micca MB42X with a topping MX3

That amp will Work but a lil weak.

Alternative amp with more power

https://www.amazon.com/SMSL-50Wx2-TDA7492-Amplifier-Adapter/dp/B00F0H8TOC

https://www.amazon.com/Micca-OriGain-Compact-Integrated-Amplifier/dp/B01M0SL7YC

More power plus Bluetooth

https://www.amazon.com/Bluetooth-Audio-Amplifier-Integrated-Subwoofer/dp/B07JVFY27T

You can get a amp that is just an amp or you can get a combo that is the dac/ headphone amp and speaker amp with Bluetooth.

https://www.amazon.com/Topping-MX3-Bluetooth-Headphome-Amplifier/dp/B075SYC4Z5

If you choose a dac/amp it will hook up via optical or USB and it bypasses your computer soundcard and dac becomes the sound card - The external dac is generally better than a computer sound card unless you have a nice/upgraded sound card.

u/MyUsernameIsJudge · 1 pointr/BudgetAudiophile

Depends on what you want.

This is for a PC right? So you're listening close up. That's a factor because the JBL's are designed for that.

JBL's with a $100 Dayton sub will sound great, be balanced, and provide more bass than any pair of bookshelf sized speakers on their own.

I'm guessing they mean because the JBL's are powered (they have amplifiers inside of them) then if you want to upgrade you just have to sell them and buy a new system. If you get an amplifier and speakers then you can upgrade the speakers or the amplifier separately. I'd add that the JBL's probably have more resale than Elac's or something like that if you consider upgrading a factor.


Don't worry about the XLR inputs if you don't need them - use these

https://www.amazon.com/UGREEN-Splitter-Computer-Multimedia-Speakers/dp/B00ZKM3S4S/ref=sr_1_3?keywords=stereo+breakout+cable&qid=1563309739&s=gateway&sr=8-3

They will plug in the little green audio output you can use for headphones.

For the subwoofer - does your PC have an orange 3.5mm audio output? If so hook that up to the subwoofer using these kinds of cables:

https://www.amazon.com/Cable-iXCC-Shielded-Gold-Plated-Stereo/dp/B019D048XC/ref=sr_1_5?keywords=3.5+to+rca&qid=1563309802&s=gateway&sr=8-5

The brands I'm linking don't matter, just the type of cable they are.