Reddit reviews Sabrent USB 3.0 to SATA External Hard Drive Docking Station for 2.5" or 3.5"' HDD, SSD [Support UASP] (DS-UBLK)
We found 48 Reddit comments about Sabrent USB 3.0 to SATA External Hard Drive Docking Station for 2.5" or 3.5"' HDD, SSD [Support UASP] (DS-UBLK). Here are the top ones, ranked by their Reddit score.
Supports Standard Desktop 2.5" or 3.5" SATA Hard Drives.Hot-swappable, plug and play, no drivers needed.Supports hard drives up to 4TB with USB 3.0.Reverse compatible with USB 1.1 & USB 2.0.
Do you necessarily need it to be external? Yes, you should be be able to pop the internal drives into an external case any time. Or you can get a dock to mount them externally as well, like this one: https://www.amazon.com/Sabrent-External-Docking-Station-DS-UBLK/dp/B00IKAQ538
Sabrent USB 3.0 to SATA External Hard Drive Docking Station for 2.5 or 3.5in HDD, SSD [Support UASP] (DS-UBLK) https://www.amazon.com/dp/B00IKAQ538/ref=cm_sw_r_cp_api_HHTQzb6MQ680W
Something like this does both sizes. it's the size of the hard drive 2.5in vs 3.5in
You can purchase a hard drive docking station that has sata and usb connections. You will need to remove the hard drive from your old laptop and insert it into the docking station that is hooked up to a new computer. This will essentially act as an external hard drive or flash drive. You should be able to pull any files off as long as the hard drive itself isn't broken.
I use this personally and it works great.
http://www.amazon.com/Sabrent-External-Docking-Station-DS-UBLK/dp/B00IKAQ538
Was it the actually HDD that died or only the laptop?, if it was only the laptop itself you could possibly pull out the HDD and put it in a HDD Dock and pull out the files that are there.
Unplugging the USB from the TV should be fine. The issue with unplugging without ejecting is that you can lose data if the computer is in the middle of writing something. A TV shouldn't be writing anything to the drive, so I figure you should be able to unplug it and power it down at any time.
I'm not sure what would cause it to suddenly stop getting power, I'd guess just bad luck and coincidence. Based on a non-scientific survey of broken USB hard drives I've seen, I'd guess that the actual hard drive is probably fine and it's just the USB interface that's broken.
You can carefully remove the hard drive from the external drive case (it may irreparably damage the case). Inside is just a standard SATA hard drive like you'd find in a laptop. You can connect this to a PC like a regular drive or purchase an external USB drive dock like this. If the drive is fine, you should just be able to copy and paste your files to a new drive without a problem.
You can't power a 3.5" HDD off of USB alone. I would get this instead: https://smile.amazon.com/Sabrent-External-Docking-Station-DS-UBLK/dp/B00IKAQ538?sa-no-redirect=1#customerReviews
Here. this works just as well.
I'm going to recommend this bad boy here
While I don't know about a PSTV, this fella worked flawlessly with my Wii U. It's externally powered and although bulky-looking, it does its job well. It even has a power button to turn it off when not in use.
Only thing you can do is buy a cheap USB dock and install the drive in there and connect it with USB to your computer and see if it pops up as a hard drive, if not then your drive is dead
Edit: something like this shall do
https://www.amazon.com/gp/aw/d/B00IKAQ538/ref=mp_s_a_1_1?ie=UTF8&qid=1496672701&sr=8-1&pi=AC_SX236_SY340_QL65&keywords=usb+hard+drive+dock&dpPl=1&dpID=31pgGAoLVTL&ref=plSrch
Buy this hard drive bay from Amazon. Shuck the old hard drive out - there are maybe 6 screws holding a typical drive enclosure together and none of them are more than your basic philips head.
Disconnect everything from the old enclosure and then just plug the drive into your new drive bay.
Does the drive make a whir-click noise? Any clicking at all? Sad to say that clicking means you're fucked.
When this is all over with, go sign up for google drive. $2 per month gets you 100GB of space to back up your important documents. Start using that and you'll never have an emergency like this again.
Pull the had drive and put it into an enclosure or dock and connect it to another computer. This dock will work with both 2.5” and 3.5” drives. An enclosure would work too, but you have to get the one that fits your drive.
Look at getting a dock like this. Then you can easily drop in a drive and run a backup to it.
Near as I can tell, that model has a standard sata drive inside the case,so all you would need to do is carefully pry it open and pull the sata drive out, then mount it in something like this:
https://www.amazon.com/Sabrent-External-Docking-Station-DS-UBLK/dp/B00IKAQ538
You have to have a specific type of cable, called a crossover ethernet cable.
Regular cable won't do it, you'd have to have a switch in between to control traffic.
You can also get a dock that allows you to essentially turn your old HDD into an external. You can then hook it up via USB and move the files that way.
Another option would be to get yourself an external 3.5 dock like this and turn it on after boot.
What specs are you looking for? This is a 500gb drive with a 16mb cache that can run at 7200RPM. It's read and write speeds are that of a run-of-the-mill mechanical hard drive. This is basically a drive you would use for a basic computer setup, an addon to an SSD setup, or as a backup drive. If you bought this drive used, then there's a possibility it could be slower than when brand new.
If you want to use it without plugging into your pc using the SATA ports on your motherboard, then you can by a dock or hard drive enclosure that you will be able to plug into your computer via USB.
Here is an example of a dock you can use:
https://www.amazon.com/Sabrent-External-Docking-Station-DS-UBLK/dp/B00IKAQ538
Here is an example of an enclosure:
https://www.amazon.com/AmazonBasics-3-5-inches-SATA-Drive-Enclosure/dp/B01MZC303G
I'd get one of those USB hard drive docks and use them as cold storage backup. Treat it like tape/blu-ray backups.
To me this is the most ideal backup solution for at-home use (you just need to get all of those drives for free/dirt cheap). It's rewritable, doesn't have to be sequentially written, and brings good physically space-to-storage density.
It's actually a SATA dock. I dont know of they make an ide dock. But here's the link.
Sabrent USB 3.0 to SATA External Hard Drive Docking Station for 2.5" or 3.5"' HDD, SSD [Support UASP] (DS-UBLK) https://www.amazon.com/dp/B00IKAQ538/ref=cm_sw_r_cp_apa_i_UNbzDbCY2YDGY
I had Macbook given to me that had water spilt on in back in 2011. It wouldn't boot so I pulled the hard drive out and ordered this for data recovery. Today I put the hard drive in and all the files popped up as if it was a portable external hard drive. I'd try this if you don't see any signs of life..
I've used Macrium Reflect 7 Free Edition and a Sabrent USB 3.0 drive dock a few times and everything worked out great.
Update. I got this drive docking station instead of an external enclosure: http://www.amazon.com/gp/product/B00IKAQ538/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1 It takes 3.5 or 2.5 inch drives, and they're bootable and hot swappable. Inexpensive and stoked on my purchase. It is a great alternative to one of the reason's I justified buying the MacPro I just sold, fixing mine and friend's failed computers by sliding their drive into my Mac. Although it isn't exactly something you want to leave a drive in all the time exposed to dust and air.
I did some math to calculate how much media I have, which isn't much compared to most out there I'm sure. 200 G's of music and 250 of movies. Sadly it nearly tops off my Mini. I'd like more headroom.
I'd like to put 1 TB either inside the mini, or use an external. Cannot find a Thunderbolt external drive that has only one drive in it... So think I'll be happy with USB 3.0 I don't need a whole lot of storage, but I would like more. I also like this NewerTech miniStack MAX, double as an external drive as well as since my Mini is plugged into my TV... and I don't have a DVD player that buy seems like a great option too. The prices are all really close. What do you guys think is the preferred method?
First off, is it under warranty? Are you okay with losing data? If yes to both, contact WD customer service and send it in. You will probably get a free replacement unless there is "visible damage".
Depending how many hoops you want to jump through, I have two ideas for you to try. You might want to see if there are other ideas first, though.
You could try connecting the drive to an Ubuntu PC. I have a failing drive that doesn't connect to Windows, but it connects to Ubuntu. Either create a bootable USB stick (there are instructions on the Ubuntu site) or install a virtual machine such as Virtual Box. Both Ubuntu and Virtual Box are free.
Another option is taking the drive out of the case. If it's a 2.5" drive, it might not have a SATA connection. I found out recently mine doesn't. So, this might not be helpful. If it is a 3.5" hard drive, you can connect it to a hard drive dock. This just a SATA to USB adapter, more or less. This will test if the electronic components in the case are bad. If it's just the case, then the drive itself is fine. I would make sure you have tried anything software-related first (ie check drivers) before attempting this. Taking the drive out of the case usually voids the warranty.
Here is a link to a hard drive dock:
http://www.amazon.com/gp/aw/d/B00IKAQ538/ref=mp_s_a_1_1?qid=1415333650&sr=8-1&pi=SY200_QL40
Ah ok, I thought you meant a tray for inside the computer.
For an external enclosure there are lots of options. I used to use some cheap Rosewill enclosures which I didn't have any problems with, but now I use this dock so I can swap drives more easily.
It really comes down to features and aesthetics, pick whatever works for you.
Even if Windows won't load, you should still be able to retreive data using an external drive dock/caddy. This assumes, however, that the issue isn't harddrive failure and you've got a second PC to transfer the data to.
I agree that, at this point, a factory reset/reinstall of the OS seems like your best option. You just might not need to lose any data in the process.
If the hard drive is still working, the easiest way is probably to buy a SATA drive cradle that connects to another computer with USB.
Something like this, this is just the first one google found.
https://www.amazon.com/Sabrent-External-Docking-Station-DS-UBLK/dp/B00IKAQ538
Take the drive out of the computer and plug it into a dock and it should show up as an external drive on whatever PC you connect the dock to.
Or maybe even simpler: https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM
If the hard drive has failed, neither of these will do anything for you.
maybe something like this:
Amazon
If you HAVE to spend money, buy a cheap hard drive dock such as this: https://www.amazon.com/Sabrent-External-Docking-Station-DS-UBLK/dp/B00IKAQ538
Take the hard drive out of its plastic enclosure/shell and put it into the dock. Plug the dock into your computer.
more something like this then use the second drive you bought in that dock. and transport it to an offsite location, then bring it back weekly, or whenever you add more content to update it.
Any SATA to USB will work. You can get a dock if you plan on swapping drives frequently or an enclosure if you want it for just this MacBook Pro.
I don't have personal experience with either of those specific products, just did a quick search for your reference.
I was also having issues with an external drive. I pulled it out of the case and dropped it into a drive dock (like this one - very handy and not expensive). Drive itself is fine and still usable - but the case just sucked. Or sucked with Yosemite.
You could check with a docking station: http://www.amazon.com/Sabrent-External-Docking-Station-DS-UBLK/dp/B00IKAQ538/
Before that I would boot an ubuntu live cd to verify the hdd is not being detected
I don't think this fits your need, but there's options like this:
Sabrent USB 3.0 to SATA External Hard Drive Docking Station for 2.5 or 3.5in HDD, SSD [Support UASP] (DS-UBLK) https://www.amazon.com/dp/B00IKAQ538/ref=cm_sw_r_cp_api_qq8wzbFKF5SR5
Again, the use case is more for tinkerers and repair techs who might want to throw a drive in temporarily to pull data or load an image.
For your case, aren't there multi-bay enclosures you could rack mount? I've seen some but they might not make sense for your need.
I hope you didn't buy that cheap looking thing. For that price you can get a much better one then that dinky thing.
Like these for instance:
https://www.amazon.com/Plugable-Hard-Drive-Supports-Drives/dp/B00APP6694/
or
https://www.amazon.com/Cable-Matters-Drive-Docking-Station/dp/B0099TX7O4/
or
https://www.amazon.com/Sabrent-External-Docking-Station-DS-UBLK/dp/B00IKAQ538/
Easiest cheapest way? Think how much space you're going to need (lets just say 4TB to give you room to grow). There's several options:
With both of these options, I will tell you to buy at least two of whatever you do. If its the USB 3.0 harddrives, but two 4TB drives and make two copies. You don't want your backup to fail. Always have a redundancy.
There are more automated options that will pull from your systems at X interval and make copies on seperate drives, but that is more expensive. I just gave you the quick easy way.
Once you move the data over, you take the hard drives and store them in top of your closes or a firebox if you have one for all your essential documents.
One last question, and I'm done bugging you.
It turns out my external hard drive is a SATA drive, which I figured it was. I also live in Canada, so a lot of shit I buy ends up being a bit more expensive than in the US. That being said, would I be alright with going with this: https://www.amazon.ca/Sabrent-External-Docking-Station-DS-UBLK/dp/B00IKAQ538/ref=sr_1_1?ie=UTF8&qid=1458941723&sr=8-1&keywords=startech+hard+drive+docking+station
I don't mind shelling out 30 bucks or so to get my files back, plus I also get extra storage back, which is good.
Okay, I just noticed a little something. The "chirp" I heard a couple times was actually the drive power down sound. I heard it on my WD that I just bought after doing the safe removal in Windows and fully unplugging it.
On my desktop I did a full format of it, then ran Chkdsk from the Drive Properties/Tools dialog, didn't find any problems there. I'm copying all the files (plus some new ones) back on to the drive to give it an even better stress test. Overall, it seems like the drive is still in good shape and it was a wonky/underpowered USB port.
Perhaps I could try and harvest the HDD from it (it's one of the USB drives that has a regular SATA drive in it, not a specially designed one), connect it to another USB adapter board, perhaps one like this one, and run some further tests on it.
There's a possibility the external enclosure is broken but the drive is fine (I've seen this quite a few times). Take it out of the enclosure and try to access the drive directly. If you have a desktop just plug it in as an additional hard drive.
If you only have a desktop you'll need a SATA (assuming this drive isn't ancient - left is IDE right is SATA http://static.diffen.com/uploadz/1/17/SATA-IDE.jpg) adapter to USB. If it's a smaller (2.5" drive) you can probably get away with something like this https://www.amazon.com/StarTech-SATA-Drive-Adapter-Cable/dp/B00HJZJI84/ If it's a larger 3.5" drive you'll want something with a separate power source, like this https://www.amazon.com/Generic-Adapter-Converter-Optical-External/dp/B01J7MWD4M/ I personally would err on the side of getting the external power adapter myself, to rule out "not enough power" as a reason the drive doesn't work.edit: I would actually spring for something like this https://www.amazon.com/Sabrent-External-Docking-Station-DS-UBLK/dp/B00IKAQ538/ Only $23 but has a lot of good reviews, I've heard good things about it specifically in the past as well. The last thing you want to do is cheap out on the adapter and think your drive is dead when your adapter is really just crap.
If the drive itself works but the computer doesn't recognize the partitions, try using linux to DD the files over and then mount the partition manually. DM me if you get here and I can either give you some pointers (if you're comfortable with linux CLI) or we may be able to work something out.
If the drive doesn't spin up when you apply power you are dealing with a situation in which you can either accept defeat or pay a LOT of money to have the files recovered professionally.
About the only thing I can think of is to remove the hard drive, put it in a carrier, plug the carrier into another computer and get off your important stuff before it completely dies:
https://www.amazon.com/Sabrent-External-Docking-Station-DS-UBLK/dp/B00IKAQ538/ref=sr_1_1?s=electronics&ie=UTF8&qid=1496808602&sr=1-1&keywords=usb+hard+drive+dock
IF the hard drive is dying, this may not work. If you have any techie friends, they may already have a dock that you can borrow instead of buying one.
Just get a dock like this.
https://www.amazon.com/Sabrent-External-Docking-Station-DS-UBLK/dp/B00IKAQ538
I'm far from a data recovery specialist, but years ago I bought one of these and I can't tell you how many pictures and documents I've recovered from "dead" laptops with it. Usually as a hail mary for a laptop thats gotten wet, or fried mobo dead ram etc.
A lot of programs that will allow you to change it but if you just want the files get one of these and plug in hdd. Will allow you to browse folders like a usb flash drive
https://www.amazon.com/Sabrent-External-Docking-Station-DS-UBLK/dp/B00IKAQ538
A program that works well for password unlock is pcunlocker if unable to make changes via cmd line
http://www.pcunlocker.com
1
2
3
Or search for similar ones elsewhere.
Or.. test the seagate dock with another hard drive if you have one lying around. You should be able to plug in any internal HDD into it. If it works, it's not the dock at fault.
what do you mean by 8GB per slot ?
also https://www.amazon.com/Sabrent-External-Docking-Station-DS-UBLK/dp/B00IKAQ538
If this is a new new build then it wouldn't hurt to reinstall the operating system. If that doesn't resolve the issue then it could be a hardware issue. Try the following:
To help us out try listing the things you have already tried.
I used to do what you're suggesting, but those little external drives are just so handy to have, it's not worth it to me anymore to keep larger format ones around. They might be a little slower when moving a bunch of large files onto them, but not having external power is soooo nice. I have several of those WD Passport Ultras, but in 1TB size.
You could also consider something like this CDN$ 26.99 USB3.0 drive dock, so you can swap in and out other drives at will. I prefer those for some things, rather than lots of enclosures. I actually have a 2-drive dock where I keep a 1TB 'slow drive', and a 240gb SSD. I dump video recordings onto the SSD, then process them onto the 1TB. Works great.
First of all, I would say it might behoove you to buy a bare HD dock. After all, it won't hurt to have when you start doing regular Time Machine backups, right?
Something like this:
http://www.amazon.com/Sabrent-External-Docking-Station-DS-UBLK/dp/B00IKAQ538
Second of all, if you're trying to do just copy files over as a backup, either designate it a Time Machine volume or just copy your entire user folder. As long as you're doing it from a user with the same name/id, it should allow it.
EDIT: If you're trying to copy these files from one HD to another on a Windows machine, you're not going to have a good time, btw. I don't think it's really worth even attempting.
Also, if you want a full clone of your old HD to a new, bigger HD you can just launch Disk Utility and do a Restore from the old drive to the new. That will clone the operating system and all your installed apps and settings as well as your data files.
Will this work for migrating stuff off the drives on my now dead build? I'll use it to hook the drives up to my laptop and transfer the files to an external drive. Since I'm going to wipe the drives and put them in a new build afterwards, is there a cheaper SATA-USB option?