Reddit Reddit reviews Sabrent USB 3.0 to SSD / 2.5-Inch SATA I/II/IIIHard Drive Adapter (EC-SSHD)

We found 83 Reddit comments about Sabrent USB 3.0 to SSD / 2.5-Inch SATA I/II/IIIHard Drive Adapter (EC-SSHD). Here are the top ones, ranked by their Reddit score.

Computer Accessories & Peripherals
Computer Cables & Interconnects
Electronics
Computers & Accessories
SATA Cables
Sabrent USB 3.0 to SSD / 2.5-Inch SATA I/II/IIIHard Drive Adapter (EC-SSHD)
Connect a 2.5" SATA I/II/III hard drive or SSD to your computer with UASP SupportSpeeds up to 5Gbps with 3.0Hot-swappable, plug and play, no drivers needed.An LED light indicates Power and Activity status. Reverse compatible with USB 2.0 & USB 3.0This Adapter comes with a free download of Acronis True Image for Sabrent software for easy cloning.
Check price on Amazon

83 Reddit comments about Sabrent USB 3.0 to SSD / 2.5-Inch SATA I/II/IIIHard Drive Adapter (EC-SSHD):

u/PretendImXyzzy · 28 pointsr/buildapcsales

needs to be sold by Store4PC and Fulfilled by Amazon, try this link (not a referral):

https://www.amazon.com/gp/product/B011M8YACM/ref=ox_sc_act_title_1?smid=A29Y8OP2GPR7PE&psc=1

u/jxn_w · 8 pointsr/teslamotors

I bought a Kingston SATA 250GB SSD with a SATA to USB adapter. Works great.

SSD

Adapter

u/chick_repellent · 7 pointsr/homeassistant

You can install Hassio on Raspbian on an SSD, which is what I do. More reliable, you have all the Hassio addons, and you can install other things on the SSD. Not all adapters will work with the Pi, but I found this USB-SATA adapter works.

Depending on which Pi you have, you might need to manually enable USB boot. See here for more info.

u/saintstryfe · 6 pointsr/applehelp

That'll work fine. Brands don't matter much - they're all going to be a big step up.

For installation you'll need a small (P1) phillips screw driver, and a Torx T6 driver. I'd also recommend a can of Compressed Air Duster - if you're in there, clean it up. Any semi-good multi-bit precision screw driver set will have both. If you want to keep your data, you'll also want to have a USB SATA cable (something like this: https://www.amazon.co.uk/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD-USB-3-0-SSD-SATA-2-5/dp/B011M8YACM/ref=pd_sbs_23_3/258-6658474-5826456?_encoding=UTF8&pd_rd_i=B011M8YACM&pd_rd_r=bb016fd2-3304-11e9-88d3-9bfb40e6fdf8&pd_rd_w=OEqZv&pd_rd_wg=5R3O5&pf_rd_p=18edf98b-139a-41ee-bb40-d725dd59d1d3&pf_rd_r=HSN8B74MBPD7Z1J2SCSJ&psc=1&refRID=HSN8B74MBPD7Z1J2SCSJ) which will let you migrate your data back after you install your new drive.

On a clean surface shut down the machine and flip it over, undoing the 8 screws on the bottom (3 will be longer, and 5 will be short) on the bottom case. Should just pop off then. On the right-hand side of the device closest to you is the battery - a short cable with a black plastic cap on the top right is the battery connector. Disconnect the battery. (Not absolutely required, but safer).

Once open, give the inside a dusting, then look for the hard drive in the lower left hand corner. Right above it will be a small plastic holding bar, held in with two locking Phillips screws. Remove them and the bar and set aside.

Slide the drive out of the IR bracket on the opposite side and disconnect from the Hard Drive Flex SATA Cable. Be careful - break this cable, and you're adding another 25$ cable to your repair.

Remove the 4 T6 Torx screws from the original drive and put them into the matching holes on your new drive. Attach to the flex cable and reseat into the IR bracket and settle in. Replace the holding bar and screw it back in, making sure it's secure. Reconnect the battery.

Replace the bottom case and replace the screws. The 3 long ones are on the top right as it's sitting in front of you. The short screws you might need to angle slightly - they should sit flush.

If you have an OS install disk you're good - if not, reboot holding Command and R to get to Internet Recovery to install a fresh copy of mOS. It will let you connect to wifi (or auto-connect to your Wired network if you have an ethernet connection). When it boots (it will take a while, it's downloading most of an OS) open Disk Utility, format your new SSD (choose Mac OS Extended Journaled for the format) and you'l be able to then install mac OS.

Once installed, if you have a SATA cable you should then be able to go into macOS setup and use Migration assistant to copy your data - if it gives an error saying it was created on a newer version of macOS, you can back to the point, create a temporary user called Administrator or Update or something like that, then update your system. With a Mid-2012 with an SSD there's no reason not to be on 10.14 Mojave, so create a temporary user, update your system using the App Store to Mojave, and then you can go into Migration Assistant again (it's in the Applications/Utilities folder).

I hope this helps you out!

u/snklkjnqqe · 4 pointsr/teslamotors

I use an older Samsung Evo SSD with a plain SATA-USB adapter. No case. The adapter has an LED.

Sabrent USB 3.0 to SSD / 2.5-Inch... https://www.amazon.com/dp/B011M8YACM?ref=ppx_pop_mob_ap_share

u/AlwaysAboveAll · 4 pointsr/techsupport

Use a cable like this to plug your hard drive into another working computer and transfer the stuff out. Then you can wipe it and reinstall the fresh OS once you have it plugged it into your new motherboard.

u/itsDjFLiP · 4 pointsr/macbookpro

Yep, if anything, just take out the battery and plug it in and see if it turns on.

Worst case scenario, you can just pull the hard drive and use this sata to USB adapter to get your files off and use it as an external drive. GL!

u/tamerlightning3 · 4 pointsr/raspberry_pi

I use a 320GB Western Digital hard drive that I salvaged from a TalkTalk YouView box. I use this Sabrent SATA to USB adapter that I got off Amazon (v.good quality). I think that this is the drive that WD use in their Passport as it runs off 5V 500mA (what USB supplys) and it is quite small. But the Pi supplys slightly less than 5V 500mA. I connect the drive to a powered USB hub (powered by this external power supply) connected to the Pi. I keep this plugged into my Pi 24/7 as I use a Pi instead of a desktop computer. I leave it in during boot and shutdown. It works well and I use it to store all of my data and I have set a folder on it as my Chromium downloads folder.
I think you had a faulty USB. Hope you didn't lose too much data.

u/GhostBond · 2 pointsr/buildapc

Ssd's (then nvme) have made raid-for-speed completely obsolete. Raid 5 is complicated/pricey to restore from, so there's little reason to use anything other than raid 1 (I think you can do it in software with windows now). But even then...the only use for that is really high availability online servers. At home you'd be better off running a backup program to an internet service or at least an external drive.

If you just want to store stuff on the drives, you can buy a cable or dock on amazon for little money that lets you connect the drives via usb.

This is what I used to transfer data off my old laptop drive:
https://www.amazon.com/gp/product/B011M8YACM/

But you might need something that also provides external power if you have a desktop drive you're trying to hook up.

u/kestononline · 2 pointsr/thedivision

It's this one I got from Amazon - Sabrent USB to SSD; it's only a USB 3.0 though; idk if that will affect the speed greatly or not.

u/Mard0g · 2 pointsr/ShieldAndroidTV

I was having issues with multiple microSD cards unmounting themselves. Annoying. I went with Samsung 250GB SSD and this $10 adapter: https://www.amazon.com/gp/aw/d/B011M8YACM/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1
It's more storage than I need but oh well but it just works.
I put a $70 antenna:
https://www.amazon.com/gp/aw/d/B00CXQO00K/ref=ya_aw_oh_bia_dp?ie=UTF8&psc=1
in my attic and bought an HDHomerun Connect. I get free OTA HD with DVR. I just used an old 1.5TB USB2.0 drive for the recordings. So far so good!

u/ihaveacrushonmercy · 2 pointsr/buildapc

Crucial SSD 500 Gb: https://www.amazon.com/gp/product/B0786QNS9B/ref=ppx_yo_dt_b_asin_title_o04_s00?ie=UTF8&psc=1

USB to SSD SATA adapter: https://www.amazon.com/gp/product/B011M8YACM/ref=ppx_yo_dt_b_asin_title_o04_s01?ie=UTF8&psc=1

And the YouTube video: https://youtu.be/-LB9TqfQrsA

Edit: Forgot to mention the software I used: https://www.disk-partition.com/free-partition-manager.html

Edit: Some SSDs will only work in PCs, but if you stick to getting what's called a SATA type SSD you will be fine :)

u/lightinthedark · 2 pointsr/nvidiashield

It'll work fine. Just need an adapter/housing for SATA to USB. Like this.

u/cargous · 2 pointsr/ableton

Of course!! Ahh yes, I forgot the most important part, haha. Sorry :) Get the below cable as well and once you have all your parts, download the free trial of Carbon Copy Cloner to the current HDD (link below - no payment/credit card needed and you get full application access during the 30 days i.e. no features are disabled). You'll use the cable to attach the SSD via USB and then open CCC and clone the current drive (instructions below). It can take a bit since the HDD is so slow so just let it run. Once it's done then you can start the steps from the IFIXIT articles. You can keep the current HDD as a backup if you'd like.

Let me know if you have any other questions!

Cable - https://www.amazon.com/gp/product/B011M8YACM/

CCC - https://bombich.com/

CCC Instructions - https://bombich.com/kb/ccc5/i-want-clone-my-entire-hard-drive-new-hard-drive-or-new-machine

u/areyougame · 2 pointsr/pcmasterrace

I'd get a USB HDD adapter and transfer the files over to another PC that way, then put the HDD back into the laptop and do a clean windows install.

u/qwerko · 2 pointsr/AlienwareAlpha

Yea you can get a wire like this.
Sabrent USB 3.0 to SSD / 2.5-Inch SATA Hard Drive Adapter [Optimized For SSD, Support UASP SATA III] (EC-SSHD) https://www.amazon.com/dp/B011M8YACM/ref=cm_sw_r_cp_api_vSJmybWWV43KP

Or an external enclosure like this

AUKEY 2.5" Hard Drive Enclosure, USB 3.0 External Disk Case for SATA HDD and SSD https://www.amazon.com/dp/B01J3NM642/ref=cm_sw_r_cp_api_eUJmybVD73H0B

u/naturalorange · 2 pointsr/rit

Why not just pull the HDD/SSD out and connect it to another computer?

Go to resnet, ask nicely, and they will probably do it for you if you bring them an external hdd or big enough flash drive.

$9.99 Sabrent USB 3.0 to SSD / 2.5-Inch SATA Hard Drive Adapter [Optimized For SSD, Support UASP SATA III] (EC-SSHD) https://www.amazon.com/dp/B011M8YACM/ref=cm_sw_r_cp_api_5u5jybMFGDXEM

u/meowmixST · 2 pointsr/techsupport

Get this!

you don't necessarily need to use the software that came with your SSD, but I guess it wouldn't hurt. I see that your laptop has USB 3.0 ports which means the transfer process shouldn't take more than 20 minutes. Just follow the instructions and it should be painless. I use Macrium Reflect, but use whatever program you feel most comfortable with.

Sometimes people report that their computer isn't recognizing the SSD connected to the USB port. That is usually fixed by running disk manager and the computer will now discover the SSD connected via USB. (press the windows key + R, then type in diskmgmt.msc)

Once your finished cloning your HDD to SSD, remove the HDD, pop in the SSD and you should be good to go. In some cases you may have to manually set the new drive as the boot drive in your BIOS, but that laptop is fairly new so I doubt you would have to do so.

u/theotherdanlynch · 2 pointsr/buildapc

> as easy as popping a few screws loose and everything is right there

It's ridiculously easy. Usually 3 to 5 screws to remove a plastic cover and another 2 screws holding the drive in place.

Buying a Samsung SSD makes it even easier because they have a program called Samsung Data Migration. You just need to either order one of the SSDs that comes with a USB-SATA interface, or buy a cheap one.

  • Connect the SSD to the adapter and plug it into a USB port on the laptop.
  • Run Samsung Data Migration with the original hard drive as the source and the SSD as the target.
  • Turn off the laptop.
  • Take out the original drive.
  • Install the SSD

    Done. That's all there is to it. If you want to get fancy, or honestly just be smarter about it, get this instead of the adapter cable. When you're all done, you can reformat the HDD that came with the computer and use it as an external drive.
u/altf3 · 2 pointsr/buildapc

Do you have a 5.25" disc drive laying around? If so, I use one of these.

u/blaziecat1103 · 2 pointsr/buildapc

If you have a desktop PC that you know has an available SATA data port and power connector, you could temporarily install the drive to get the data off of it. You might have to manually set the boot order in the BIOS so that your computer boots from its hard drive and not the laptop drive.

Alternatively, you could get a SATA to USB adapter, regardless of what computer you have. I have this $10 Sabrent one, although there are much cheaper ones available like the one /u/jamvanderloeff linked.

u/llamaman456 · 2 pointsr/techsupport

I would create a clone of that disk immediately, using clonezilla, if possible. Also is the drive showing up in disk management. Also use this teardown guide to make sure the hdd isnt loose. Also use a external sata adapter https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/ref=sr_1_2?ie=UTF8&qid=1500618312&sr=8-2&keywords=usb+to+sata, to make sure its not the sata port on the motherboard that is failing. If it still doesnt work the sata connector on drive is likely failing which means you need a new drive.

u/BrewingHeavyWeather · 2 pointsr/buildapc

> Is the SSD with my OS toast?

Maybe, maybe not. Assuming you can't just plug into a SATA port in another PC: do you have, or at least have access to, another computer, running Windows, that you can use, with USB 3.0 ports? If so, try this guy in one, with the SSD:

https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/

Also, how does it bootloop? If it gets to the Windows starting animations, or Windows 7 bottom loading bar, then the SSD is likely fine.

As old as the system is, my bet is on age-related RAM, PSU, or mobo failure.

u/ComputerSavvy · 2 pointsr/homelab

I have 5 of these:

https://www.amazon.com/ORICO-Tool-Free-External-Lay-Flat-Enclosure/dp/B00A5323NO

They'll accept both 3.5 and 2.5 drives.

I have one of these and it works well:

Sabrent USB 3.0 to SSD / 2.5-Inch SATA Hard Drive Adapter

https://www.amazon.com/gp/product/B011M8YACM

Having stuff like this makes cloning drives easy, I use Paragon hard disk manager suite 14 but I'd imagine that Macrium Reflect or Clonezilla would work just as well.

I may have to invest in one of these to have all my bases covered!

https://www.amazon.com/StarTech-2-5in-Adapter-Converter-SAT32M225/dp/B00ITJ7U20

u/bmoorelucas · 2 pointsr/buildapc

Samsung Data Migration software is free with a Samsung drive so you just need a dock. Its also fast and easy.

Samsung download page

EDIT: Also this USB to SATA is EXCELLENT for SSD transfers:

Sabrent USB 3.0 to SSD / 2.5-Inch SATA Hard Drive Adapter

Second edit: You said you have a dock lol use that with the Samsung software and you are solid.

u/eNomineZerum · 2 pointsr/techsupport

No worries.

If you just want to do a full reinstall of windows you take out the HDD, put in the SSD, and install windows from scratch.

If you want to clone from the HDD to the SDD you need software and either a USB to SATA cable or a drive enclosure.

If you go with a M.2 you will insert it and use the cloning software to clone your HDD to the M.2 drive.

Something else to look into, if you have a smaller SSD and larger secondary drive, is to move the search index, Windows temp files, and such onto the larger, slower drive. Doing this frees up the precious space on the M.2 drive while reducing the overall read/writes.

Personally I would save up for the M.2 drive, make that primary, and keep the HDD as a secondary.

u/Route66_LANparty · 2 pointsr/buildapc

You'll want something like this:

u/unabletofindmyself · 2 pointsr/sysadmin

I agree if the budget allows that, but this has a USB adapter because RPi lack SATA. SATA->USB adapter cable isn't that expensive although slightly more bulky than WD's solution.

u/Pandalishus · 2 pointsr/AnthemTheGame

If you have an old SSD and a console that has USB 3.0, you can pick up one of these and just plug the bare drive in. Works great on my X.

Sabrent USB 3.0 to SSD / 2.5-Inch SATA I/II/IIIHard Drive Adapter (EC-SSHD) https://www.amazon.com/dp/B011M8YACM/

u/gugudan · 2 pointsr/Seaofthieves

Wow, I just looked up that Xbox branded SSD. It's a really bad deal; I feel like Seagate is counting on console players not realizing how much SSD prices have dropped over the last few months.

Almost $100 for 500 GB is nuts.

For comparison, I paid $80 for a 1 TB Crucial MX500, which probably one of the top one or two non-Samsung SATA SSDs

I'd suggest OP look for SATA SSD deals on /r/BuildaPCSales then buy a SATA to USB adapter for less than $10 on Amazon.

Example of what I'm talking about. Plug one end into the SSD and one end into your Xbox.

u/Housies · 2 pointsr/thinkpad

If you clone it, you can use dd on a Linux live USB. You either need an external drive with at least 128GB of free space, or a SATA to USB adaptor to plug the new drive into. (such as this: https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM) Once you've cloned it, you have to expand the partition to make use of the extra space. This can be done with GParted, also on a Linux live USB.

u/Den10vibes · 2 pointsr/playblackdesert

https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM

All you need is one of these and then plug the thing in your Xbox like a usb stick

u/ReenigneArcher · 2 pointsr/3Dprinting

No, it's firmware for overburning DVDs to utilize more than the capacity listed.

I used this cable, and made it so I can easily unplug it if I want to connect a hard drive temporary. I thought about fixing the cable in place with the design but I thought removable was better.

Sabrent USB 3.0 to SSD / 2.5-Inch SATA I/II/IIIHard Drive Adapter (EC-SSHD) https://www.amazon.com/dp/B011M8YACM/ref=cm_sw_r_cp_apa_i_k6roDbM2GSSWZ

u/english- · 2 pointsr/buildapc

I bought a 500GB Samsung Evo SSD card the other day along with a new GPU. The new GPU I have installed and updated and working awesomely however I have a few problems with the SSD.

I have the Samsung CD which comes with the Data Migration software however I don't have the leads to connect it - will this or this work? But would that mean the SSD will be external to me case? In which case would it benefit me to just get this?

If I get the latter will that enable me to transfer data from my current HDD (which is staying inside my PC)? Or will I have to get one of the first SATA cables, transfer data and then install it internally?

Thanks for your help!

u/ACrazyGerman · 2 pointsr/StardewValley

It's extremely easy to pull a hard drive out of most laptops. You can buy SATA to USB cables on amazon for under $10. You can easily with a screw driver remove the HDD and get all your files back with the SATA to USB cable.

This is the one I just recently bought for myself, works great!
http://smile.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM?ie=UTF8&psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00

u/theitsage · 1 pointr/mac

The best external SSD solution I've found and have been using is this $10 USB 3.0 SATA cable. IO speed is right around 420Mbps. It doesn't look half bad using the Samsung Evo 850 bare.

u/Tensoneu · 1 pointr/techsupport

There are 2 possible hardware failure. Either the hard drive is bad or the cable connecting the drive. If you look underneath the back of your laptop there is a model number that begins with the letter "A" followed by 4 numbers.

To check if it's the hard drive, open the laptop and take out the drive then plug it into an external enclosure or cable. ($10 from Amazon: http://www.amazon.com/gp/aw/d/B011M8YACM/ref=mp_s_a_1_2?qid=1453229675&sr=8-2&pi=SY200_QL40&keywords=Sata+usb+3.0+cable&dpPl=1&dpID=51bXzhXZynL&ref=plSrch)

Then plug it to your USB port. If it boots up then it's the SATA cable within the laptop that needs to be replaced. If it doesn't bootup from USB you will need a new drive.

The SATA cable can be replaced but requires opening the laptop. You can find replacement cable on eBay, just make sure it's for the correct model.

u/Gadsden · 1 pointr/linux

You have a few options that would allow you to test Linux without giving up Windows in the first place. It's easier to go back to Windows later, if it was never gone.

That being said, if you use a virtual machine [like VirtualBox], or install Linux on a USB flash drive, then you're not getting the completely native experience with Linux.

Running in a VM won't give Linux direct access to devices. Linux not having hardware level direct access to your video card may mean that some visual effects won't work right, and/or that it could be considerably slower.

If you install to a USB flash drive, then your disk access is going to be very slow, compared to HDD speeds, slower yet compared to SATA or NVMe SSD speeds.

If you configure your system to dual boot, then you have the option [at boot time] to boot into one operating system, or the other. This can be done non-destructively, by resizing your Windows partition down [free space allowing] during Linux install, then installing Linux partitions in the newly created free space.

I would recommend a dual boot system, personally. That's what I do, so I can go back and forth between them.

You can even set up virtual machines afterwards that allow you to access one from the other in a virtual machine, but that's a whole different fun thing to get into.

EDIT: I see now where you mention the lack of space on your current machine. You can grab a SATA SSD and a $10 USB3/SATA adapter and use that. Not really elegant, but neither is 32GB of storage, or using a slow USB flash.

I got 3 of these. They work great, fast, and they are compatible with smartmontools in Linux, so you can access the SMART system of a HDD, or SSD for testing and troubleshooting.

u/smokie249 · 1 pointr/applehelp

Thank you for your suggestions. As for the second part, do I need to find a specific iteration of SATA connection? Or would something like this connect to the drive?

u/rotopenguin · 1 pointr/thinkpad

A Sata to Usb tail is cheap as chips. It's worth it to have one around.

https://www.amazon.com/gp/product/B011M8YACM/

u/youfuckedupdude · 1 pointr/linux4noobs

My suggestion is: Purchase one of these you'll use it a lot (i promise). Remove the old harddrive and make it into an external.

Since you don't already have a backup of your files (tisk tisk), I would create a dropbox, mega, google, and just bring the old laptop to the library and upload away. Bring the new laptop in, backup your files on that one first.

I can't stress enough how many times having that dongle saved my ass, highly suggest you get one. Or something like this.

u/TheLawsOfChaos · 1 pointr/ASUS

It sounds like you currently have a normal HDD and an m2 SSD, and just purchased an SSD. Then it sounds like you have only two spots, the m2 and the normal 2.5" bay.

If that is correct, for like $10 you can find a usb>sata connection (I in no way endorse this, was just the first I found https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/ref=sr_1_5?ie=UTF8&qid=1525968376&sr=8-5&keywords=usb+sata)

You will need a dvd or a usb drive, burn whatever flavor of disk copier you like (the Acronis rep here probably would say their product, but clonezilla or others would work as well). You'd boot from the usb/dvd (whichever you use), and would start the clone from your source drive to your new one.

I've done it numerous times (though I have an external 2 drive dock, as I do this pretty often, cloning drives that is) and works pretty flawlessly.

u/cr0ft · 1 pointr/AskTechnology

If the hard drive is still working, the easiest way is probably to buy a SATA drive cradle that connects to another computer with USB.

Something like this, this is just the first one google found.

https://www.amazon.com/Sabrent-External-Docking-Station-DS-UBLK/dp/B00IKAQ538

Take the drive out of the computer and plug it into a dock and it should show up as an external drive on whatever PC you connect the dock to.

Or maybe even simpler: https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM

If the hard drive has failed, neither of these will do anything for you.

u/StepDADoDRAGONS · 1 pointr/PUBGXboxOne
u/K1LL3RY0 · 1 pointr/pcmasterrace

Install the new os on the SSD and use one of these to extract the data. I use these all the time for work.

Sabrent USB 3.0 to SSD / 2.5-Inch: https://smile.amazon.com/dp/B011M8YACM/ref=cm_sw_r_cp_apa_i_tZRPCbG2F1C3Z

u/HylianSavior · 1 pointr/DataHoarder

Yeah, it would definitely only work with SSDs, as the 12V rail isn’t powered at all. There are USB to SATA adapters like these: https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM, so it’s probably fine for SSDs. Most computers can sink more than 500mA nowadays.

u/QuadrangularNipples · 1 pointr/buildapc

Thanks, you mean something like this?

https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM

I am not sure if booting to linux would work or not. I cannot even get it to post if the SSD is plugged in. Booting from USB for windows repair failed, so did attempting a clean installation from USB.

u/jimmytruelove · 1 pointr/techsupport

Thanks chravus! That's exactly what I'm doing:

Sabrent USB 3.0 to SSD / 2.5-Inch SATA Hard Drive Adapter [Optimized For SSD, Support UASP SATA III] (EC-SSHD)

https://www.amazon.co.uk/dp/B011M8YACM/ref=cm_sw_r_cp_api_LsDmyb0NPA589

I'm buying this.. as far as I can tell it's exactly the same as a caddy but just plugs in to the end.. right?

u/JustinBrower · 1 pointr/writing

What happened to the HDD? Physically lost (damaged, misplaced)? Or the OS is just wonky and you can't get into it?

If it's the second option, I can possibly help you get the data back if you can plug it into an external cable and use another computer to look at the contents of the HDD (if you haven't tried that already).

Sorry that this happened to you. It's happened to me twice before. I have backups of my important docs in the cloud, and on 8 separate hdds now. Always. I learned this the hard way.

EDIT: The cable you need is this - https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/ref=sr_1_5?s=electronics&ie=UTF8&qid=1505575012&sr=1-5&keywords=usb+to+sata

If, using another computer and this cable, in file explorer you see no HDD present, then the HDD has physical damage that would require more extensive work. If you see the hdd show up though. Double click on the hdd and browse its contents for your files. Hope they are there. If you need help in taking the hdd out of your computer, PM me.

u/cotton_pepper · 1 pointr/techsupport

2013 MB Pros had M.2 drives or HDDs. If it was a HDD you're in luck, that's easy and not that expensive.

Just open it up and take out the hard, use a SATA to USB and essentially turn it into an external hard drive. You may need some freeware to convert the Mac files into Windows.

SATA to USB that we use in our shop: https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/ref=sr_1_8?keywords=sata+to+usb&qid=1574806896&smid=ATVPDKIKX0DER&sr=8-8

If it's the M.2 I would recommend you take it to a local computer shop and have them move the data as the tools are more expensive than the work.

u/highbuzz · 1 pointr/buildapcsales

I bought this exact drive for my mom's laptop on Amazon 2 weeks or so ago when I saw the good deal. It's a great SSD but NOTE!!

It does NOT come with any cable or peripheries besides the manual and CD of Samsung's Cloning software and SSD Magician. I would recommend buying a SATA adapter to USB 3.0 for each. I bought this and it worked like a charm for cloning her old HDD to the new SSD - http://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/ref=sr_1_5?s=pc&ie=UTF8&qid=1449613719&sr=1-5&keywords=sata+to+usb+3.0

I just recommend that one because it's USB 3.0 and just $9.99 on Prime. But there are many others, simply type "SATA to USB adapter" on Amazon.

u/Cranzia · 1 pointr/techsupport

Thanks! I actually bought this and it should be arriving today or tomorrow. I just need an external disc drive to run the disc they give me, if I don't want to buy one I can download a program to do it right?

u/Nowayjosealdo · 1 pointr/applehelp

It's your hard drive failing. Have it replaced with an ssd and have your data imported in from the drive going bad. I see and do this everyday. Stop messing with it before it fails completely.

Edit: It's actually easy to handle this problem with a 10 dollar part. If you are interested, let me know and I will help you. https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/ref=sr_1_5?ie=UTF8&qid=1521770855&sr=8-5&keywords=sata+hard+drive+cable+to+usb

u/dnyank1 · 1 pointr/mac

Hey! Upgrading the classic macbook pro to an SSD is one of the most effective upgrades you can make as far as upgrading a laptop goes. It's very straightforward, and relatively low risk. Any 2.5" SATA SSD will do the job (I personally recommend Crucial MX500 drives), you'll also need a torx t5 and small phillips head driver. Work carefully, following the ifixit steps (removing the battery is key!), and you shouldn't cause any damage.
https://www.ifixit.com/Guide/MacBook+Pro+13-Inch+Unibody+Mid+2012+Hard+Drive+Replacement/10378

Before installing the drive, be sure to either make a time machine backup, or acquire a sata-to-USB adapter like this, or you'll lose access to your data! https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM

u/workm · 1 pointr/Dell

You need a sata to usb cable, like this.

u/4wh457 · 1 pointr/GlobalOffensive

You could get a 120gb SSD along with a USB3/thunderbolt adapter for around 50$ and then install windows on that.

https://www.amazon.com/Kingston-Digital-SSDNow-SUV400S37-120G/dp/B01FJ4UN76

https://www.amazon.com/Sabrent-2-5-Inch-Adapter-Optimized-EC-SSHD/dp/B011M8YACM/

u/Ddosvulcan · 1 pointr/techsupport

Stop using the machine now and power it down. Pull the hard drive from it, and get a SATA to USB adapter to connect it to a secondary computer. It will show up as a removable device mapped as a probably the D:\ or F:\ drive, or somewhere around there. On the secondary computer install Recuva and scan this drive, it should find any files marked for delete and will allow you to pull a copy of them. The SATA to USB adapter is a worthwhile investment for when things like this happen.

u/shark6428 · 1 pointr/Lightroom

I buy bare drives like the previous link because they're cheaper and don't depend on proprietary hardware/software so a failure won't cost me too much. You can use a cable like this one that converts SATA to a USB connection. A laptop will provide enough power over USB to run SSDs and 2.5" HDDs, but I don't use a tablet, so I can't say if that'll work as easy. Search around and see what you find and TEST before you leave. I understand that a tablet might allow for less weight, smaller bags and such, but I personally find a laptop to be much more useful.

u/c0ccuh · 1 pointr/linuxhardware

>Hot-plugging the SSD while booted into Linux doesn't make it detectable either

Maybe get one of these USB-SATA adapters and try them? Mine has a LED indicator similar to this? That way you could at least see whether there is any signs of life from the drive.

u/TempusFugit- · 1 pointr/linux4noobs

I'm using this cable : https://www.amazon.fr/dp/B011M8YACM/ref=cm_sw_r_cp_apa_1GBFzb7JA6RXN

I have two SATA/USB cable, I had the same problem with both :(

u/agentlotek · 1 pointr/Windows10

I recently moved my Windows 10 install from a 500GB WD Blue HDD over to a 1TB Crucial SSD using EaseUS Todo Backup's free version. There is a disk clone option built into the software for migrating to another drive. I also purchased a Sabrent USB 3.0 to SSD / 2.5-Inch SATA I/II/III Hard Drive Adapter to connect the SSD to my pc for the cloning process.
It was super easy to do.

u/Shock5150 · 1 pointr/techsupport

After a brief google search, it appears that your product key is embedded in the bios. If it were my laptop, I would get a hold of something like this and clone your drive using the adapter, then just swap the drive and boot.

u/luxifertran · 1 pointr/windows

If you’re replacing your hdd with an ssd, I would recommending getting something like this https://www.amazon.com/dp/B011M8YACM/ref=cm_sw_r_cp_tai_ZV22CbTVESH2Z
Then install Macrium Reflect and clone to your new drive. I remember there’s an option to adjust to different drive size.

u/wjrichardson · 1 pointr/teslamotors

Yes it will. I am using this combo:

Sabrent USB 3.0 to SSD / 2.5-Inch... https://www.amazon.com/dp/B011M8YACM?ref=ppx_pop_mob_ap_share

plus

First Quality PVBNG-012 - Brief... https://www.amazon.com/dp/B01N6JQS8C?ref=ppx_pop_mob_ap_share

u/soapiestpenguin · 1 pointr/xboxone

It’s a Sabrent, it was under $10.
Here’s the link:

https://www.amazon.com/dp/B00OJ3UJ2S/ref=cm_sw_r_cp_awdb_t1_3aU7CbVSD95GK

Works great. You can also just use a SATA to USB3.0 adapter if you don’t care about the looks

https://www.amazon.com/dp/B011M8YACM/ref=cm_sw_r_cp_awdb_t1_4cU7Cb5QRX4CM

u/PM_ME_YOUR_LAYOUTS · 1 pointr/photoshop

While (probably) possible, that's not a great idea when doing it 'properly' is so cheap.

You can get a 128gb SSD and a UASP sata to usb 3.1 adapter together for about £30, maybre more or less depending on where you live. You'll gimp your performance a bit if you don't use a UASP compatible adapter - the prices for the UASP ones are basically the same, so just keep an eye out for that feature.

 

This + this.

u/Sobia6464 · 1 pointr/msp

Ended up researching into a bag and eventually found one I think will work well.

I will link to everything I've found on amazon. I have found others on our distributors website. Hopefully this will help others put together something as well!

Bag

SATA Adapter

Toolkit

Toner/Fox and Hound

Small LED Flashlight

Velcro Wire Ties - Zip ties are awful

Network Kit

External HDD

Analog Phone - For testing Fax Lines mainly

There's more, such as cables and things, but everyone should be OK with figuring that out for yourselves. Total the kit (with cables and stuff included) is only about $370.91 per technician.

Hope this helps someone!

u/IsimplywalkinMordor · 1 pointr/freenas

Would I use something like this?

u/munsking · 1 pointr/archlinux

get 2 of these

dd from old drive to new drive, pop new drive in the new laptop, try to boot, in windows go to the drive manager or whatever it's called and expand the partition to use the entire drive, done.

windows might not work in the new laptop though, because of new hardware, in that case you might want to manually install windows, plug in the old drive with that usb cable and manually move the data (programs need to be reinstalled cause of the fucking registry and because windows is a complete clusterfuck in general)

u/Introrama · 1 pointr/ableton

Yea something like this: Sabrent Festplatten - Zubehör Gehäuse Adapter USB 3.0 zu SSD / 2,5-Zoll-SATA-Festplatten Adapter [Optimiert für SSD, Unterstützt UASP SATA III] (EC-SSHD) https://www.amazon.de/dp/B011M8YACM/ref=cm_sw_r_cp_api_i_JVcoDbPB2F0M9

u/JambonBeurre1 · 1 pointr/france

C’est possible de récupérer le contenu du disque bien évidemment, il faudra ouvrir le poste et lire le disque sur une autre machine via ce genre de connecteur.

u/floydiandroid · 1 pointr/applehelp

Without an enclosure or an external connection you're really going to be limited.

Just get one of these and you can use a trial of something like Carbon Copy Cloner to clone the drive.

If you don't want to spend $10 on the converter and if you have your Office suite installation media (or have a way to get it) then you can just pop the new drive into your computer and press CMD+R at boot time (if you have 10.9 and up) to boot to internet recovery and re-install the OS from scratch.

u/AK-Brian · 1 pointr/overclocking

Alarming noises are generally not good news when there's a hard drive involved.

Some drives will provide advance notice of mechanical or media failures in the form of a SMART error. Download a program like CrystalDiskInfo (direct link to Windows download), which will show you the status information generated by your drive. If you see a Health Status which shows up as yellow or red (eg, "Caution"), this typically means that the drive is either unable to read or write a specific portion of the disk, or is failing in some other way (spin-up errors, etc).

Mechanical drives don't last forever, unfortunately, and laptop drives are especially prone to failure. They're constantly being moved about and jostled, and in my experience they tend to be less robustly constructed due to the inherent size and weight limitations.

If you do find that your drive is showing errors or signs of failure, back up your data. In fact, back up your data regardless. Use a cloud storage service like BackBlaze or iDrive or Livedrive, etc. Even free services such as Google Drive, Dropbox or OneDrive may be enough to save your important documents or photos, if you don't need a complete backup. A portable USB hard drive is another good option - for $50-100 you can pick up a small 1-2TB external drive. Most include software to help you mirror or otherwise create a backup copy of your data, as well. Being an external drive, you can also keep it somewhere safe (literally, inside a safe, or at someone else's house for safekeeping) in case something happens like a house fire, water damage, theft, etc.

Lastly, you'll want to swap out the laptop's failing drive. Depending on how old the laptop is, you might be able to install a solid state drive to replace the original mechanical drive. There are many benefits to going with a solid state drive - no noise, less power usage, less heat, resistant to drop damage, extremely fast file access. The only downside is that they are more expensive than traditional hard drives for the same equivalent capacity. A 1TB mechanical drive may only cost $50 while a solid state might cost $110, for example. If you don't need a big drive, you can find good 500GB SSDs for about $60-70 or so. One example is Crucial's MX500. Another is Samsung's 860 EVO.

The process of copying your drive's contents onto a new SSD or new internal HDD is a bit trickier, especially with a laptop. Some have the ability to use two hard drives, but others only have one slot, which means you'll need a way to connect both drives at the same time. The solution? A little USB adapter cable. This will let your computer access the new drive, allowing you to create an exact copy (clone) with a program like Macrium Reflect. After you've cloned your drive, you can remove the old drive, place the new drive inside, and be back in action.

u/_KevinLeyva · 1 pointr/pcmasterrace

So I should buy this and add the drivers on another computer? https://www.amazon.com/dp/B011M8YACM/ref=cm_sw_r_cp_api_wEHYxb2Z7NXW7

u/CipherFrostful · 1 pointr/techsupport
u/tobiasm · 1 pointr/GaState

get a usb to sata cable like this.

pull the drive out and connect it to another computer using the cable. You should be able to explore the drive like a portable drive if you need to get anything off of it. can't tell exactly what's wrong with your PC without it actually being in front of me.