Reddit Reddit reviews Scotch-Brite Heavy Duty Scurb Sponge, 12-Pack

We found 9 Reddit comments about Scotch-Brite Heavy Duty Scurb Sponge, 12-Pack. Here are the top ones, ranked by their Reddit score.

Health & Personal Care
Household Supplies
Household Cleaning Tools
Household Surfaces Scouring Pads & Sticks
Scotch-Brite Heavy Duty Scurb Sponge, 12-Pack
BEST SCOURING PAD - Use in the kitchen to replace scrapers, steel wool and metal sponges. From keeping tidy to the deepest clean, we have every tool you need to leave your home spotless.CLEANING TOOLS FOR EVERY MESS - Tough fibers and abrasives to clean grills and ovens and remove baked-on food from pots and pans.STRONG AND DURABLE - the product contains durable synthetic fibers that are crimped and heat set to develop a strong open web.CONSISTENT PERFORMANCE - the product contains abrasive particles that are effective in scrubbing operation. These particles are evenly distributed throughout the pad to help ensure consistent performance.RESISTS DEGRADATION FEATURE - the product is constructed with resin that resists degradation from exposure to hot water, detergents and normal cleaning liquids.
Check price on Amazon

9 Reddit comments about Scotch-Brite Heavy Duty Scurb Sponge, 12-Pack:

u/TemptedTemplar · 3 pointsr/NintendoSwitch

I haven't done one myself. But if you don't want to ruin the default shell, BASSTOP and some other companies on Amazon sell after market shells.

First you need to take a scour pad to the surface you want to paint. Rinse it off and make sure its clean and dry before painting.

Use a spray primer before painting. I would recommend a matte black or white. The use spray or acrylic paints to get your desired colors/effects/designs.

Then use a spray clear coat to seal it.

I'd look up plastic painting tutorials, a lot of the same practices can be used to achieve different results with controller shells.

u/lindisty · 3 pointsr/lifehacks

Thank you for mentioning that you can't mix these chemicals!

I think it's my shampoo and conditioner- I get buildup in my tub really fast.

While it has never looked like this (ew. Just... ew.) I use fill and soak with bleach method as well. I find the smell to be less abrasive than Comet, which is the next best thing for removing soap scum, in my opinion.

I don't use other chemicals in that same day, though. I fill the tub with hot water (if you have a crappy hot water tank, think of maybe adding some water you boil on the stove) and add a few cups of bleach. Let that sit for about an hour or so- no less than 30 minutes. Then get a pair of gloves and a dish sponge like this and start to work on the sides- dip the sponge into the bleach water, scrub over the area, repeat.

For a job this big... you might need to do this a couple times.

u/mechanicalpulse · 1 pointr/HomeImprovement

I use a heavy duty abrasive scouring pad to clean my toilet. Something like this or this. It works like nothing else. I've used pumice stones with good results, too, but the scour pad is my go-to now since the abrasive doesn't wear down like pumice does. Others in the thread are concerned about leaving scratches. I just checked the bowl with the flashlight and I don't see any.

u/JustNilt · 1 pointr/LifeProTips

A friend's ex did this regularly to their business vehicle. He learned that a car wash with the high pressure hose works fairly well and you can use a green scrubbie (Amazon link because some folks have asked what that is before) very gently to get any remaining bits out. If you get down to metal, make sure you use some touchup paint to seal that back up or it'll rust on you.

His ex tended to just graze them. If you have serious damage, you probably need to be careful of removing too much other paint. HTH

Edit: Forgot to add that if there are minor scratches left, you can often buff them out with rubbing compound (ask at any auto parts store).

u/TheBrickster · 1 pointr/craftsman113

Thanks for the reply!

Haha it was mostly just because a lot of the threads online about cast iron table saws and rust seem to warn against it. I have a ROS but no belt sander so that definitely could be an option. I did stick one of these on the ROS and go over the top after electrolysis and it did an okay job of cleaning up and smoothing out the area to the left of the blade opening and miter slot (it was comparable to the right section. I'll post an update after I have a chance to work on it some more this weekend!

u/edheler · 1 pointr/preppers

I have to clean the outside of my filters every 3-6 months. The pores on the outside clog up with a thin slick sort of film in my case. I use a 3M scouring pad and very lightly rub it on the outside. Then rinse the filters with clean water. You really should disassemble and clean your Berkey at least once every six months anyways.

u/MesaDixon · 1 pointr/Guitar
u/[deleted] · 1 pointr/DIY

Stuff a 3M pad up the spout.

More than you need on Amazon

u/lensupthere · 1 pointr/Cooking

Barkeepers Friend + Heavy Duty Scour Pad

I used this combo on my baking trays this past weekend, worked great.

(https://www.amazon.com/Heavy-Duty-Scour-Pad-86/dp/B000KKIMU0).