Reddit reviews Scotch Indoor Mounting Tape, 1-inch X 125-inches, White, 1-Roll (314H-MED)
We found 9 Reddit comments about Scotch Indoor Mounting Tape, 1-inch X 125-inches, White, 1-Roll (314H-MED). Here are the top ones, ranked by their Reddit score.
Ideal for Painted SurfacesIntended for indoor use - Delivers a strong, permanent bond on contactHolds up to 15 lb with 3M industrial strength adhesive. To hold 1 lb use 3". To hold 15 lb use 45"Application temperature 50°F to 100°FEasy-to-apply design with no mess or toolsUse instead of nails and screwsEnsure your surface is smooth, clean and dry for the best bondGreat for do-it-yourself projectsMade in the USA with Globally Sourced MaterialsDesigned For: Painted Drywall, Finished Wood, Metal, Acrylic, Tile and Glass
I've got a roll of this just for sticking power strips to desks and shit without having to do any planning.
All you Britons out there! Start sealing your envelopes with duct tape. Or this incredibly sticky mounting tape. Would be almost impossible to open the envelope without leaving evidence of tampering.
You should get the SF450 with the Node 202. Use double sided mounting tape for the SSD.
You won't be hitting over 300W with most Node 202 build. The SF450 is noticeably better quality, quieter, and is modular. The FD Integra may work for a locked i3/i5 + 1060 or 1050, but anymore than that you should get the SF450.
Get the 3M brand mounting tape. This is the exact solution I use for my magnetic strip. It works great. Here's a link.
I recently started using Scotch Indoor Mounting Tape, 1-Inch x 125-Inches, 1-Roll (314P) https://www.amazon.com/dp/B0007P5G8Y/ref=cm_sw_r_cp_api_2K4ozbBQQ3846 and I've been extremely happy with the hold on heavier metal figs. I have to pop the base off with a knife, but the mini stays put.
I used this double sided mounting tape to put them on the ceiling, link. I cut half inch squares and put three on each panel.
I got some kind of command heavy duty roll with no non sticky parts, rated up to 5lbs for huge pictures. Good to know that it works with the actual strips through.
(Edit: this)
I just use Scotch indoor mounting tape and attach them straight to a wall. Works very well on most of my patches, although a few stubborn ones from my SpaceX patch collection keep falling off every few weeks or months. If they keep falling, just add more tape to cover a greater percentage of the backing surface area. Other non-SpaceX patches don't seem to fall off as easily, it's something about the iron-on backing material SpaceX uses which doesn't like adhering well to the tape.
Double sided tape would work if it's strong enough. Something like this stuff.
What case do you have? You may be better off using the side panel fan as intake so it gives your GPU fresh, cool air.