Reddit reviews Scotch-Mount Extreme Double-Sided Mounting Strips 414H-ST, 1 in x 3 in 8/pk
We found 5 Reddit comments about Scotch-Mount Extreme Double-Sided Mounting Strips 414H-ST, 1 in x 3 in 8/pk. Here are the top ones, ranked by their Reddit score.
Maximum Strength - Our strongest tape delivers a superior, conformable bond on contactIntended for indoor and outdoor useHolds up to 12 lb with 3M industrial strength adhesive. To hold 1.5 lb use 1 Strip. To hold 12 lb use 8 StripsApplication temperature 50°F to 100°FEasy-to-apply design with no mess or toolsUse instead of nails or screwsEnsure your surface is smooth, clean and dry for the best bondGreat for do-it-yourself projectsMade in the USA with Globally Sourced MaterialsDesigned For: Painted Drywall, Painted/Finished Wood, Metal, Acrylic, Smooth Stone, and Painted Concrete
I'm slightly older if that really matters. Here's my advice.
One thing you can do right now without buying anything is to remove the stickers off of your laptop. Seriously, it makes a difference.
For all my recommendations I'm going to list price first as I imagine budget being a concern.
$5 - Do you only use the external drive when at your desk? If so, mounting it to the corner of the desk, the wall, (or if you ever pick up an external monitor, the back of that) might look cleaner.
I use this stuff to stick things - https://www.amazon.com/Scotch-051141397252-Extremely-Mounting-414P-ST/dp/B018GKCI82/ You can find it at stores like Target.
With all the cables coming out of your laptop, I think a USB hub would really help your setup as all of the cables would go directly into one place. If your laptop has a USB-C port and supports charging over it, you can get a USB-C hub so you can connect peripherals and charging over one cable.
$15 - If you don't have USB-C, something like this looks good - https://www.amazon.com/Anker-4-Port-Macbook-Surface-Notebook/dp/B00XMD7KPU/
It has four USB 3.0 ports and is very clean and small. However, the cable is a bit short.
Around $79 - If you do have USB-C, I have this hub and it's pretty good, however the cable is short and can feel a bit loose at times.
$25 - A basic colored mousepad might look cleaner if you want to go for that look. I have this mousepad and recommend it, but it's all personal preference.
$35 - I think you should pick up a headphone stand so the grease and oils don't get on your laptop screen, I recommend this one - https://www.amazon.com/Satechi-Aluminum-Headphone-Stand-Holder/dp/B019PI9QFC/
It gives you three extra USB 3.0 ports, a headphone jack and comes in four different colors, and has a solid aluminum build. If you don't need those extras, this stand is still aluminum and comes in at $12 - https://www.amazon.com/dp/B07GZFX6ND/
Probably around $100-$150 - The biggest upgrade you can make here I think is an external monitor and keyboard. It would improve your setup's ergonomics significantly. This desk looks pretty small, so I would recommend something no bigger than 24 inches in screen size. The resolution of the screen and such would depend on what you want and your laptop's power. However, I highly recommend at least 1920x1080 resolution.
$25 - If you ever do decide to upgrade to an external monitor, you probably wouldn't be able to use two screens on your desk, and the closed laptop would take up way too much space. I would recommend this laptop stand - https://www.amazon.com/Vertical-Adjustable-OMOTON-Aluminum-Chromebook/dp/B0769G51R7/
I have it myself and it's very well built, adjustable, and makes things a lot cleaner if you use an external monitor. It has branding on one side but if you flip it you can just use the side with no branding so it looks super clean. You can make it very stable on the desk with some simple double-sided tape.
That's all I have for now. Enjoy your setup!
I used some buff mounting tape for the angled wall. Link HERE.
It holds really well, but it'll probably cause some damage if they ever need to come down. One of the frames was noticeably crooked, so I pealed it off the wall to try again. THIS is what it looked like underneath. Easy fix, just annoying and something to consider.
I tried some weaker mounting tape first, but it didn't hold.
> B) a lot of the hinge mechanism shattered, so it would be one hell of a fix job to get it working again,
Depending on how it broke, you can fix it without the hinge. The fastest fix I recommend is using aluminum sheeting from a hardware store and some heavy duty Scotch mounting strips.
I used something similar to mount my Nolo VR tracker to my OSVR headset.
I totally hear that. Get this mounting tape below. The people who made the Vive-n-Chill told me it is what they used to mount the fans on the VIve. So far I've use it to mount a Leap Motion, an SDD, the Vive-n-Chill fans when I moved them, and even the WiGig card in my pc—you'll find tons of uses for it, it is really great stuff:
https://www.amazon.com/gp/product/B018GKCI82/
Also gaffer's tape of you want something that will stick to rugs and anything.
https://www.amazon.com/Scotch-051141397252-Extremely-Mounting-414P-ST/dp/B018GKCI82#aw-udpv3-customer-reviews_feature_div
Not sure why this is reviewed so low but these are the step best double sided tape type things you can get. They don't sell the tape in rolls sadly but trust me. Once these go on, they're never coming off.
You'll almost definitely rip the paint off your walls when removing. But if you really want them to stick. It'll work.