Reddit Reddit reviews Scotch Restickable Dots, 7/8-in x 7/8-in, Clear, 18-Dots (R105)

We found 4 Reddit comments about Scotch Restickable Dots, 7/8-in x 7/8-in, Clear, 18-Dots (R105). Here are the top ones, ranked by their Reddit score.

Office & School Supplies
Tape, Adhesives & Fasteners
Mounting Tape
Office Products
Interlocking Tape & Mounting Products
Scotch Restickable Dots, 7/8-in x 7/8-in, Clear, 18-Dots (R105)
Ideal for lightweight mounting like papers, photos, cards and moreUse instead of push pins to keep your surfaces looking greatDouble-sided adhesive bonds on contactPre-cut strips for easy, mess-free applicationRemoves easily without leaving any residue on ideal surfacesGreat for use on metal, glass, mirrors, smooth wood, acrylic, plastic, painted walls and moreNot recommended for use on wallpaper, delicate surfaces or walls painted with flat paint. May damage some substrates upon removal.Gently wash with soap and water and air dry to regain stickinessColor: ClearSize: 7/8 in. x 7/8 in.
Check price on Amazon

4 Reddit comments about Scotch Restickable Dots, 7/8-in x 7/8-in, Clear, 18-Dots (R105):

u/mr-hasgaha · 3 pointsr/starcitizen

I have dual sticks, not have a HOTAS, but I think my setup is still relevant.

I've been toying with the idea of making fold-away holders for my sticks that attach to my chair but it's probably a pipe-dream. I use my computer and desk mainly for work... so any solution has to be removable or tucked away for non-playtime. But until then... this is how I do it:

A year or so ago, someone on this sub suggested Scotch Restickable Dots. I attach 3-4 to the base of each stick and plant them firmly on the mouse pad. I also have many under the mouse pad to keep it secured to the desk top.

Works well for me. I simply pick up the sticks and put them off to the side when I'm done. I remove the Dots from the bases and put them on top of the bases to keep them from sticking to the desk elsewhere. I also cover my sticks when not in use (I have cats)... so the Dots remain fairly clean.

Oh, and the Dots are washable... so you can "refresh" them if they loose their stickiness.

u/JacksReditAccount · 2 pointsr/oculus

Sounds like there could be some RF interference.

Try this USB hub and put the hub closer to where your controller will be, and then plug the MS dongle into that.

I have one on my desk with my Logitech keyboard and mouse dongles and it's worked great.

(Note it's USB2 on purpose, USB3 has been known to cause interference with wireless devices)

https://www.amazon.com/gp/product/B07B4YBR3Z/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

Secondary tip:

If you put that USB hub on your desk and want it to stay put, these are great temporary fasteners:

https://www.amazon.com/gp/product/B007Y17T70/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1

u/OsoGato · 2 pointsr/microgrowery

I plan on storing my seeds for years. Here's how I do it:

  1. Drill a 3/4" hole in the lid of a 2 or 4 oz. baby food jar, using a Forstner bit. Tape over the hole with micropore tape on both sides. Fill the jar half-way with Damprid (calcium chloride). Silica gel only gets RH down to 40%, whereas CaCl2 lowers it to <25%. Stuff the rest of the jar with cotton and screw the lid on. I stick the baby food jar to the bottom of a pint- or quart-sized wide-mouth mason jar using these from Wallyworld.

  2. Put the seeds in small ziploc baggies or breeder's packs inside the mason jar. Make sure they're slightly open and not airtight.

  3. Put some oxygen absorber packets in there.

  4. Put the lid on and vacuum seal the jar with one of these and a vacuum pump. You can use a Food Saver pump if you have one but I went with a cheaper option. I squirt some silicone in a ring around the lip for a better seal to the jar sealer.

  5. Screw the jar ring on and store the mason jar in the fridge.

    This method takes care of the 3 things that lower seed viability--humidity, oxidation (with the oxygen absorbers and vacuum seal), and temperature. I also plan on saving herb for the long haul like this, but with 62% Boveda packs instead of the CaCl2.
u/mamacat49 · 2 pointsr/Radiology

After years of tape, I changed to putty. But then I found this:

https://www.amazon.com/Scotch-Restickable-8-inch-18-Dots-R105/dp/B007Y17T70/ref=sr_1_4?ie=UTF8&qid=1519050026&sr=8-4&keywords=3m+sticky+dots

I've had the same set of stickies on my markers for over 6 weeks. They are totally washable ( when you're washing your hands), add just a drop of soap and rub them. You can feel the grime coming off of them. Then, I just let them dry for about 10 minutes. I keep them on a piece of film/plastic in my pocket. Life changing. They are very thin, so I doubled them on my marker to make it easier to use.