Reddit reviews ScotchBlue Original Painter's Tape 2090-18NC, 0.70 in x 60 yd (18mm x 54,8m), 1 Roll
We found 8 Reddit comments about ScotchBlue Original Painter's Tape 2090-18NC, 0.70 in x 60 yd (18mm x 54,8m), 1 Roll. Here are the top ones, ranked by their Reddit score.
Designed for use on multiple surfaces such as smooth or lightly textured walls, trim, baseboards, tile and glass14-day clean removal leaves behind no damage or sticky residueMedium adhesiveUV and sunlight resistantSize: 0.70 in. x 60 yd.CREATE SOCIAL DISTANCING MARKINGS: Create box or “X” queues for waiting areas or make lanes in aisles in a fast, easy, and efficient way – whether it’s short- or long-term useTape Removal Tips: Wait until the paint is dry to the touch before removing the tape. Lift the tape up by slowly pulling it back on itself, then removing at a 45-degree angle.Pack Size: 1 Roll/PackTape Application Tips: For great paint results make sure the surface is clean, dry and dust-free so that the tape sticks properly. Next, apply the tape onto the surface while pressing down firmly as you go. And lastly, let the tape set for about 30 to 60 minutes before painting.
https://www.amazon.com/ScotchBlue-Painters-Multi-Use-70-Inch-60-Yard/dp/B00004Z4BB
This stuff, aka painter's tape, for those that don't wanna click.
Edit to add - vinegar also helps remove rust, and if you're afraid steel wool will be too abrasive, use aluminum foil as your scrubber. Foil and vinegar is a long-standing rust removal tool, but use only tiny amounts of vinegar, you don't want it to drip down along the side of the pole inside the pickup.
Add'l edit to add - anything that removes the rust is going to make it go somewhere - I read that having a vacuum running while you do it is a good precaution to keep the tiny rusty bits being removed from getting everywhere.
Definitely tape the fretboard off with painter's tape! It's specifically designed to seal/stick well and release cleanly/easily. Aside from using it to tape off guitar necks, as a former roller derby ref we used it to tape down tracks on top of expensive roller skating rinks floors. Always came up easily!
https://www.amazon.com/3M-ScotchBlue-Painters-Tape-Multi-Surfaces/dp/B00004Z4BB?th=1
This stuff is an absolute godsend for dorm walls
http://imgur.com/a/EMEaU
This is a christmas light I printed as a gift for my Grandma on a Rostock V2 Max.
I used cheap white PLA from bgastore on ebay (link later).
I designed the file in Autodesk Inventor 2017 Student Version and in Meshmixer. I also used Meshmixer to create the custom supports for the model. http://www.thingiverse.com/thing:1914863
The model was printed on Blue Tape with no glue or bed heat.
Support removal took around 3 hours, I started with the middle, then went around the text and then finished up at the top of the model. I used needle nose pliers and wire cutters I would not recommend printing this unless you have both.
Afterwards I used acrylic paint to paint over the text. The surface was rough if you’re planning on painting this model I would recommend sanding it first.
The print can be kept as a christmas tree ornament or as a light. It’s possible cut a hole in it to fit a large lightbulb in or order a small one off of amazon. Make sure the bulb doesn’t touch the sides of the print as it can melt the plastic.
Cura Settings:
Layer Height: .3mm
Line Width: .5mm
Wall Line Width: 1mm
Top/Bottom Thickness: 2mm
Infil: solid
Print temp : 205
Build Plate: 0
Retraction speed: 50mm/s
Extra Prime amount: .1mm
Minimum Extrusion Distance Window: 6.5mm
Speed: 30mm/s
Wall Speed: 15mm/s
Initial Layer Speed: 8mm/s
Combing mode: all
Z hop when travelling: 2mm
Cooling: fan 100%
No support, the meshmixer supports are enough
Brim: 1mm
Link to plastic:
http://www.ebay.com/itm/like/391087201228?lpid=82&chn=ps&ul_ref=http%253A%252F%252Frover.ebay.com%252Frover%252F1%252F711-117182-37290-0%252F2%253Fmtid%253D1588%2526kwid%253D1%2526crlp%253D145795696709_324272%2526itemid%253D391087201228%2526targetid%253D265536273303%2526rpc%253D0.08%2526rpc_upld_id%253D91336%2526device%253Dm%2526mpre%253Dhttp%25253A%25252F%25252Fwww.ebay.com%25252Fulk%25252Fitm%25252Flike%25252F391087201228%25253Flpid%25253D82%252526chn%25253Dps%2526adtype%253Dpla%2526googleloc%253D9005779%2526poi%253D%2526campaignid%253D672333784%2526adgroupid%253D29658622530%2526rlsatarget%253Dpla-265536273303%2526gclid%253DCj0KEQiA08rBBRDUn4qproqwzYMBEiQAqpzns6jXyE4PiaoJpcMmUbU6nRO9XAd2FxXUSDttHbQfGFAaAjGt8P8HAQ%2526srcrot%253D711-117182-37290-0%2526rvr_id%253D1127005495389&ul_noapp=true
Tape:
https://www.amazon.com/ScotchBlue-Painters-Multi-Use-70-Inch-60-Yard/dp/B00004Z4BB
It appears to be painter's tape which doesn't leave a residue.
>duct-tape or similar items at the hardware store.
No! It'll DESTROY the surface. Use this stuff
ScotchBlue Original Multi-Surface Painter’s Tape, .70 inch x 60 yard, 2090, 1 Roll https://www.amazon.com/dp/B00004Z4BB/ref=cm_sw_r_cp_apa_i_11y6CbB0P2K7S