Reddit Reddit reviews stardrift 10-Pack 3mm Diameter Snap on Ferrite Core Bead Choke Ring Cord RFI EMI Noise Suppressor Filter for USB / Audio / Video Cable Power Cord Black

We found 13 Reddit comments about stardrift 10-Pack 3mm Diameter Snap on Ferrite Core Bead Choke Ring Cord RFI EMI Noise Suppressor Filter for USB / Audio / Video Cable Power Cord Black. Here are the top ones, ranked by their Reddit score.

Electronics
Car Electronics Accessories
Car Audio & Video Installation Products
Car Amplifier Installation Products
Car Amplifier Noise Filters
Car & Vehicle Electronics
stardrift 10-Pack 3mm Diameter Snap on Ferrite Core Bead Choke Ring Cord RFI EMI Noise Suppressor Filter for USB / Audio / Video Cable Power Cord Black
RFI EMI Filter:Stop EMI and RFI effectively to improve signal integrityApplication Occasion:Clip them on AC power lines,USB cable,mouse cable,keyboard cable,headset cable,video cable,audio cable,data cableClip On Ferrite Cores:The core has small clips on it,it can be opened and clipped on to a cable easilyWell Made and Nice Quality:Made of Plastic Housing and Ferrite Core,with inner self-adaption clip can mount on cables tightly and work for a super long timeSuitable for 3.0-4.5mm cables;Package Includes:10 * 3mm Ferrite Core Ring
Check price on Amazon

13 Reddit comments about stardrift 10-Pack 3mm Diameter Snap on Ferrite Core Bead Choke Ring Cord RFI EMI Noise Suppressor Filter for USB / Audio / Video Cable Power Cord Black:

u/wyatt1209 · 6 pointsr/headphones

This is probably caused by poor shielding. Grab something like this from Amazon (just make sure you get the right size) and that might help. No guarantee though.

u/10nix · 5 pointsr/amateurradio

You should first try clipping something like these onto both ends of the USB cable. It might be all you need.

u/MrAkai · 3 pointsr/PS4

Try getting a USB cable with Ferrite beads (sometimes called "Chokes") and see if that helps.

You can also just buy the chokes and put them on your own cables

https://www.amazon.com/stardrift-10-Pack-Diameter-Ferrite-Suppressor/dp/B015RAZTIA

u/countrykev · 3 pointsr/madisonwi

Couple things you can try.

  1. Try coiling any excess length of your speaker wire. The wire is basically an antenna that’s receiving the AM signal and your speaker isn’t shielded enough so it is amplified and you hear it. Shortening the length of the wire can help.

  2. You can try a ferrite and clamp one or two along the wire.
u/smushkan · 2 pointsr/videography

All a shielded cable is is effectively foil or another dielectric wrapped around the cord. It's pretty cheap, so as long as you buy one from a reputable dealer the chances are you're getting the real deal.

Another thing that could be tried is attaching a ferrite core to the cable. They soak up any RFI and EMI noise being inducted on the cable to a certain extent. Not a substitute for shielding, but they can help in some cases.

I have had a very similar issue before with some microphones when being fed plug-in or phantom power when the microphones didn't need it or at the incorrect voltage. I'd imagine that the G7 is putting plug-in power out the microphone input. Some cameras do let you disable that in the settings menu so worth a try if you can.

It could just be the G7 itself with internal noise issues. I havn't heard anyone complain that the G7 has such issues though, so that would be a first for me, though that sort of 'digital noise' is very common in complicated devices like PC sound cards where there's a lot of activity on the board around the preamps.

Not sure if the G7 has either of these, but if the camera does have wi-fi or bluetooth make sure those are switched off too.

u/Fritts336 · 2 pointsr/PS4

This is the proper fix for anyone else looking!

https://www.amazon.com/stardrift-10-Pack-Diameter-Ferrite-Filter/dp/B015RAZTIA

Ferrite beads prevent interference in two directions: from a device or to a device.[1] A conductive cable acts as an antenna – if the device produces radio frequency energy, this can be transmitted through the cable, which acts as an unintentional radiator. In this case the bead is required for regulatory compliance, to reduce EMI. Conversely, if there are other sources of EMI, such as household appliances, the bead prevents the cable from acting as an antenna and receiving interference from these other devices. This is particularly common on data cables and on medical equipment.

Source wikipedia. Plus ive used many of these.

u/janitory · 2 pointsr/pcmasterrace

You can get these at local stores for acoustics and electronic stores like RadioShack.

I guess you are from the US since you didn't mention another country - so, here is a Amazon.com link to some.

Newegg also has them.

If you are infact from Europe, visit http://gh.de/ .

Hope this helps! And keep on using Mumble! :)

u/MrCaptain23 · 1 pointr/mazda3

thank you! Do you think this will help btw if I can't find any ones that prevent radio static? https://www.amazon.com/gp/product/B015RAZTIA/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1

u/ItsBail · 1 pointr/amateurradio

Do you live in Lithuania?

Your neighbor is a ham radio operator. In one of the recordings he is sending TEST (contest) and his call sign.

I can give you his name if you need to narrow it down. I'd suggest talking to him and let him know his signal is getting into you stuff

You can fix this on your end as well with snap on chokes
https://www.amazon.com/stardrift-10-Pack-Diameter-Ferrite-Suppressor/dp/B015RAZTIA

If it's too strong.. ehhhhh not sure about your local laws

u/Intellektual01 · 1 pointr/DJs

How are your power cords arranged? Is there anything overlapping? Sounds like some sort of interference. Not other turntables to test with?

Before sending it back for another out of warranty repair, you may want to try a ferrite ring or two. Amazon has them pretty cheap.

https://www.amazon.com/dp/B015RAZTIA/ref=cm_sw_r_cp_api_d0TYzbRYCKEEJ

u/magnetoencefalografy · 1 pointr/skeptic

That's good, at least.

Think you could get away with looping each ear's cable round a ferrite ring a couple of times and showing her something like this, with some pretty graphs showing how they can reduce EMF, and hope she misses the fact the EMF is generated in the buds themselves?

u/spoils__princess · 1 pointr/audiophile

Try picking up some ferrite clamps to put on the cable to see if it will help the cable effectively reject the interference.

​

Such as these: https://www.amazon.com/stardrift-10-Pack-Diameter-Ferrite-Suppressor/dp/B015RAZTIA

u/I_hate_kids_too · 1 pointr/snes

>S-Video consists of two video components, luma and chroma. The checkerboard pattern you often see with poorly-built cabling is caused by the chroma component not being fully separated from the luma component and causing interference. Sounds like your thinner cable is better than your thicker one.


So is this caused by a lack of shielding or the lack of a ferrite bead?


If it's the lack of a ferrite bead, would something like this fix the problem?


> Incidentally, the yellow wire is not needed for S-Video and is frequently omitted entirely from S-Video cables. You should probably leave it disconnected.


Yeah I was wondering about that... Good to know.