Reddit Reddit reviews Starlandled 10-Pack Aluminum Channel for LED Strip Lights Installation,Easy to Cut,Professional Look,U-Shape LED Cover Diffuser Track with Complete Mounting Accessories for Easy Installation

We found 5 Reddit comments about Starlandled 10-Pack Aluminum Channel for LED Strip Lights Installation,Easy to Cut,Professional Look,U-Shape LED Cover Diffuser Track with Complete Mounting Accessories for Easy Installation. Here are the top ones, ranked by their Reddit score.

Tools & Home Improvement
Lighting & Ceiling Fans
Lighting Accessories
Under-Counter Fixture Mounting
Starlandled 10-Pack Aluminum Channel for LED Strip Lights Installation,Easy to Cut,Professional Look,U-Shape LED Cover Diffuser Track with Complete Mounting Accessories for Easy Installation
PACKING DETAILS: This 10 pack (1m/3.3ft segments) U-shape aluminum channels/extrusions/profiles come with 10pcs of milky pc cover, 20pcs of end caps,20pcs of mounting clips, 20pcs of screws (for mounting on Wood Surface),and 20pcs of expansion screws(for mounting on Concrete or Gypsum Wall). For Extra Mounting Clips and End Caps: Please search "B01NBPF24M".(For 20AWG Extension Wire Cord please search "B01N42RLM1")PERFECT SHIELD FOR LED STRIPS: Not only do aluminum channel systems dissipate the heat produced by LEDs, but the cover protects the LEDs from exposure to dust, hair and physical contact.VERSATILE&EASY INSTALLATION: Fits most popular LED strip types (such as 3528, 5050 & 5630 LED strips). Accepts LED strip lights up to 12mm wide. Can be cut and customized to suit any project. Simply stick the LED strip light's adhesive backing inside the channel, snap on the diffuser cover, and mount the channel whenever desired. Can be surface mounted and recessed.SOUND QUALITY: The track is a sturdy u-shaped anodized extruded aluminum channel full of grooves for better heat dissipation; Milky white pc diffuser works well to help spread the light more evenly from the LED strip lights; METAL mounting brackets are heat-resisting,no deformation and hold the led channels firmly so you never worry about them falling off.MULTIPLE APPLICATION: Achieve under-cabinet and back splash lighting, accent and back lighting with ease. Light up your kitchen, living room, patio, bedroom, closet, and much more with ease.
Check price on Amazon

5 Reddit comments about Starlandled 10-Pack Aluminum Channel for LED Strip Lights Installation,Easy to Cut,Professional Look,U-Shape LED Cover Diffuser Track with Complete Mounting Accessories for Easy Installation:

u/redlotusaustin · 7 pointsr/homeautomation

If you don't mind going the DIY route, you could probably come in under $100 for parts for the strips:

u/Turbopanzer9 · 6 pointsr/porterrobinson

Sorry for the late response!

I bought 40 meters worth of ws2812B LED strips (a type of LED strip that can be programmed). You can get these for pretty cheap of Amazon. Then, I used the adhesive on the back of the LEDs to stick them in these special LED mounting racks that I could mount on to some metal storage shelves.

To interface with the LEDs, I'm using a Pixlite Controller like this one. The cool thing about these controllers is that they can output DMX (DMX is the protocol used to control those big fancy lights you see at concerts) in addition to driving LEDs. Then the programming and sequencing is done in Lightjams. In addition to being the best low budget software for LED pixel programing, Lightjams can also be used to program any DMX fixture.

So I got 5 the cheap DMX moving head lights and controlled them with Lightjams too.

I knew if I wanted to pull of this song, I was going to need lasers, but DMX lasers are stupid expensive. Soooo I had to get a little unconventional. I ordered some sketch cheap Chinese lasers that I wired to a DMX relay. I mounted the lasers to the shelves using camera clamps and controlled them in Lightjams too.

Figuring out how to do all this and building it took me about 6 months. Then, programming took another few months. I am actually working on programing an entire set of songs from the Worlds tour. I am nearly done, and it's about an hour long! I'll be sure to post it here when it's done!

I appreciate the interest, let me know if you want any additional info!

u/BillDaCatt · 3 pointsr/led

You can get aluminum channels with frosted covers to mount your LED strips in.

https://smile.amazon.com/dp/B01LL2SLME/ref=psdc_14325671_t2_B01MYF2P2I

___

Here is an alternate idea I have been kicking around for a while for creating a cheap and easy LED strip light diffuser, but I have never tried it: The materials are parchment paper and 2" wide clear packing tape. You can probably find both of these at your local grocery store. You will also need a hand saw and a miter box.

Remove the parchment paper roll from its cardboard package and make a pencil mark one inch from the end of the roll. Holding the roll gently but firmly against one side of the miter box, cut off the end of the roll at the mark using a hand saw (avoid power tools for this operation). Unroll the resulting one inch wide roll of parchment paper and secure in place over the LED strip with a length of 2" wide clear packing tape.

u/DimsdalePirhana · 1 pointr/homeautomation

In my kitchen I have 4 separate cabinet groupings, in which I installed above and below cabinet lighting. I used bichromatic (WW/CW) strip lighting from Amazon, and interfaced it with my UPB and home automation systems. I had the electrician run 110 V AC from the UPB wall switches to the top of each stack of cabinets, then wired in the DC drivers. After the DC drivers I wired in a strip light controller. Before I purchased the controller, I ensured that it would return the lighting to the same color it was set to when it was turned off, and so it does.

I then ran strip lighting in track along the tops of the cabinets for the above cabinet lighting. For the under cabinet lighting, I ran white coated cable down the inside front corner of the cabinets, and ran the strip lighting in track along the underside of the cabinets.

I was able to program all the controllers for the above cabinet lighting to one remote, and all the controllers for the below cabinet lighting to another remote. The lights change color in synchrony. I rarely change the color of the lights, so the remotes sit in a drawer doing nothing for the most part. The lighting works flawlessly, and provides a lot of light without much heat. Because the remotes also function as dimmers, I didn't install dimmer UPB switches. Since I had to use different wattage drivers, I'm not sure if the dimmer switches would have dimmed the strips uniformly, while the remotes certainly do. Like the color, I don't change the intensity often anyway.

I have had no quality issues. I was careful to use aluminum track, and the drivers are all meanwell. Overall, I have a very nice seamless light from minimally visible hardware unless you're looking for it.

u/AtomicFlx · 1 pointr/homeautomation

Of course LED strips or rope will work, but what about colored spotlights instead? Just throw a few around the yard pointed at the house in various Christmas colors and you are done.

If you do install LED strips, I would consider installing them in LED tracks to keep them safer so you dont have as much maintenance (the glue on LED strips sucks donkey balls) and they will look cleaner.

They come in flat

https://www.amazon.com/Starlandled-Aluminum-Installation-Professional-Accessories/dp/B01LL2SLME/ref=sr_1_3?ie=UTF8&qid=1542417534&sr=8-3&keywords=LED+track

and corner that would work really nicely under rain gutters.

https://www.amazon.com/StarlandLed-Aluminum-Installation-Professional-Accessories/dp/B01LL3S006/ref=sr_1_4?ie=UTF8&qid=1542417534&sr=8-4&keywords=LED+track