Reddit reviews StarTech.com Multimode (MM) SC Fiber Media Converter for 10/100Mbps Network - Ethernet to SC MM Fiber Media Converter - 2 km / 1.2 m (MCM110SC2)
We found 4 Reddit comments about StarTech.com Multimode (MM) SC Fiber Media Converter for 10/100Mbps Network - Ethernet to SC MM Fiber Media Converter - 2 km / 1.2 m (MCM110SC2). Here are the top ones, ranked by their Reddit score.
LONG DISTANCES: This Ethernet media converter improves network scalability by increasing the distances between network points by up to 2km (Multi-mode). It also includes far end fault (FEF) detectionFAST SPEEDS: Providing increased bandwidth & high data throughput, the fiber to Ethernet media converter is designed for large, high speed work groups that require expansion of fast Ethernet networksCOMPACT & DURABLE: Featuring a compact, lightweight design, the media converter can be mounted or placed into any location with little to no configuration, perfect for mission-critical applicationsHASSLE-FREE INSTALLATION: This professional-grade fiber media converter offers a simple setup and fully transparent conversion between copper and fiber Ethernet linksTHE STARTECH.COM ADVANTAGE: StarTech.com offers a 2-year warranty and free lifetime technical support on this converter, and has been the choice of IT professionals and businesses for over 30 years
I'd suggest running fibre out there. A pair of these:
https://www.amazon.com/dp/B002Q0WMWQ
would do the job nicely, and won't expose your home network to lightning damage or ground loops.
If the lots are connected it's possible to DIY a fiber link for relatively cheap.
https://www.amazon.com/CableWholesales-Fiber-Indoor-Outdoor-Multimode/dp/B0088L4PTK
http://www.homedepot.com/p/item/100122861
Bury the cable inside a conduit (or buy a direct bury cable) and add two of these on each side.
https://www.amazon.com/StarTech-com-Fiber-Ethernet-Converter-MCM110SC2/dp/B002Q0WMWQ
rent a trencher and get to work
http://www6.homedepot.com/tool-truck-rental/Trencher_18/T-4-HS18/
I reckon it can be done for 1000$ in equipment costs within a day or two if the soil is not too rocky.
I would do that with a pair of fiber to Ethernet converters. Like these. Those are rated for 10/100, but there are some that will do Gigabit Ethernet and 10 GigE.
That is exactly what you need to do. You need a media converter at each end and the TX plugs into the RX of the other. The entire thing will act like one long Cat5 connection.
Here is a slightly cheaper one. Pay attention to the fiber connectors you use.
http://www.amazon.com/StarTech-com-Fiber-Ethernet-Converter-MCM110SC2/dp/B002Q0WMWQ/