Reddit reviews StarTech.com PCI Express to PCI Adapter Card - PCIe to PCI Converter Adapter with Low Profile / Half-Height Bracket (PEX1PCI1)
We found 9 Reddit comments about StarTech.com PCI Express to PCI Adapter Card - PCIe to PCI Converter Adapter with Low Profile / Half-Height Bracket (PEX1PCI1). Here are the top ones, ranked by their Reddit score.
Install half-height/low profile PCI interface cards in a standard PCI Express expansion slotPCI Express to PCI Adapter cardPCI Express to PCI ConverterPCIe to PCI AdapterPCIe to PCI or PCI-X with LP4 Power ConnectorPCIe x1 to PCI Slot AdapterPCIe to PCI
> Can't move to a VM because it uses proprietary PCI interface cards, which also don't have updated drivers.
Pass-through + https://www.amazon.com/StarTech-com-Express-Adapter-Card-PEX1PCI1/dp/B0024CV3SA
Perhaps that could work? In any case, you'd still have to run the old OS version, but at least you would have slightly easier access to newer hardware (not counting the PCI card, obviously).
I'm already having visions of an m.2 1x pcie to full-sized pcie riser coupled with a pcie to pci bridge and one of those modems connected to a Qotom J1900 machine with a DIY cardboard lid to keep everything inside.
Total cost: $250
Time to configure: 18+ hours of wrangling with someone's forked github driver branch from 2011
The "Save money by building your own *DSL router" Medium post: priceless.
A VM could absolutely work with a pass+through and the card /u/grimman listed (or SHOULD in theory). We have a similar setup for RFD (remote firing device - those are newer ones just a reference) where the software only runs on XP and will not ever run on anything newer (I tried way to much to get it working so I know it won't lol).
Has to have a cable just like the one linked above (this one incase the above is removed for any reason :P) and it works just fine.
Software installed fine on the VM, the VM found the adapter card after just plugging it in, boom RFD worked wonderfully on a win10 laptop running the VM now. No more lugging around the old winXP brick of a machine!
EDIT - OP comment: You may need a different adapter then what was mentioned however setting it up on a VM "should" work just fine; it is worth atleast trying :) plus it means you can have a backup ready to go at a moments notice! Just take a snapshot of the VM once you are done getting it working perfectly and problem solved :)....or backup the VM itself and save it to a network drive to be actually backed up....or both the snapshot and VM backup. I recommend both!
You can use a PCI to pciex1 card like this.
http://www.amazon.com/StarTech-com-Express-Adapter-Card-PEX1PCI1/dp/B0024CV3SA?th=0
And then use the low profile mount.
http://www.amazon.com/StarTech-com-Express-Adapter-Card-PEX1PCI1/dp/B0024CV3SA
I'd recommend exchanging either the card or the motherboard though. Adapting always has a chance to go astray and not work like it should.
Probably can't, there is an intermediate bridge chip on adapters, the POST codes probably won't make it past them. You could try though, or go get the proper tester. PCI Express to PCI Adapter Card - PCIe to PCI Converter Adapter with Low Profile / Half-Height Bracket https://www.amazon.com/dp/B0024CV3SA/
If you are using the USB audio control box that come with that Cloud 2, the sound card or on board sound don't do anything.
Adapter like this may work, but then the side panel cannot close.
https://www.amazon.com/StarTech-com-PCI-Express-Adapter-Card/dp/B0024CV3SA
Apparently there is an adapter posted in another comment here. https://www.amazon.com/StarTech-com-PCI-Express-Adapter-Card/dp/B0024CV3SA
Something like this?
https://www.amazon.com/StarTech-com-Express-Adapter-Card-PEX1PCI1/dp/B0024CV3SA