Reddit reviews Stratux 1090ES & UAT - Radios (Low Power v2+v3) and High Gain Antennas
We found 5 Reddit comments about Stratux 1090ES & UAT - Radios (Low Power v2+v3) and High Gain Antennas. Here are the top ones, ranked by their Reddit score.
Plug and play with and supported by Stratux project.Includes two low power radios each programmed for tuned antennas.High gain antennas. Improved sensitivity radios.70%+ lower power consumption and optimized heat dissipation.For Stratux ABS injection molded case ONLY. Will NOT fit into SummitLink cases.
Sure, take a look at https://www.amazon.com/gp/product/B07K1GZMM9/ref=as_li_tl?ie=UTF8&camp=1789&creative=9325&creativeASIN=B07K1GZMM9&linkCode=as2&tag=stratux-20&linkId=c93e468a61ec3aabf2c76daa291316f5
The radios you have are blue for both bands and now there's the new one that picks up more traffic and everything quicker and further out. There are a ton of discussions about it on the Stratux Facebook page.
im pretty sure the nooelec stuff no one recommends.
i noticed when i used the new antennaes i got better signal and a better gps position. this one
hi, I have same issue but solution does not work.
I got everything new as of yesterday from stratux amazon store.
I run 1.5b2 , pi3b board
Antennas and SDRs ( https://www.amazon.com/gp/product/B07K1GZMM9/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1 )
UAT/Gps runs fine. I can get traffic and see towers in UAT
Web gui shows 2 SDRs connected.
I cannot get any 1090 messages, even under airliners, next to the airport.
I run the SDR serials script (only for v2, no failsafe) no luck
I tried without UAT installed, no luck
Switched Pi3b boards, no luck
​
Shall I return it or is there anything else to troubleshoot?
Thanks!!!
​
-------------------------------------------------------
Found 1 device(s):
0: Generic RTL2832U OEM
Using device 0: Generic RTL2832U OEM
No supported tuner found
Enabled direct sampling mode, input 1
​
Current configuration:
__________________________________________
Vendor ID: 0x0bda
Product ID: 0x2838
Manufacturer: Stratux
Product: LowPowerV2
Serial number: stx:1090:0
Serial number enabled: yes
IR endpoint enabled: no
Remote wakeup enabled: no
These?
Stratux 1090ES & UAT - Radios (Low Power v2+v3) and High Gain Antennas https://www.amazon.com/dp/B07K1GZMM9/ref=cm_sw_r_cp_api_i_azNVCbZ35SWKD
Hello everybody and thank you a lot for your answers ! :)
The aircraft of my students is equiped with a L3 Lynx NGT-9000 and I found this in the manual :
"Traffic Advisory System (TAS) The Traffic Advisory System (TAS) is an optional feature of the Lynx NGT-9000. This feature provides the capability to interrogate nearby aircraft transponders and issue Traffic Advisory (TA) alert as well as a voice audio output that announces Traffic Advisories and relative altitude to the flight crew. This option requires the installation of a directional antenna."
This is what I want to do, it will not be possible with the Stratux ? :(
I have bought his kit of antennas : amazon antennas
I have bought this kit of adapters but they are too big : SMA right angle
I would like the adapters thats fit on the stratux antennas.
Anyways, if there is no way to see the nearby trafic with the Stratux, I will just not use it and ship the parts back.
A Stratux user told me that it will work in the Montréal aera thank to the Burlington ADSB tower.
Do you think it can't do what I want at all ?
Thank you a lot for your precious advices !