i got a pair of kegs during AIH's sale as well and i'm also new to kegging.

On your first question, here's what I'm doing:

• build video
  
• fridge: danby DAR044A5BSLDD
  
• regulator
  
• co2 tank
  
• tap
  
• couplers
  
• beer line
  
• gas line
  
• drip tray
  
  and of course the two 5 gallon ball lock kegs from AIH.
  
  

I keep posting this in the keezer builds for people who are about to build, here is the list of what I did with costs and where I bought things:

Here, while not basic, but a list that might help. This is a 4 keg setup. Some items are not exactly needed, for example hose clamps, MFL push to connect (you could just get barb ones), but helpful for disconnecting/cleaning. You can save a lot on faucets - my 4 costed me $280 total all in. You could also get a cheaper freezer.

I got a regulator with 2 possible pressures so I can have carbonation pressure plus serving pressure at the same time - also not a requirement.

Name|Price|Quantity|Total|URL
:--|--:|:-:|--:|:--
Inkbird Itc-308 Digital Temperature Controller Outlet Thermostat 2-stage 1100w w/ Sensor|$35 |1|35|https://www.amazon.com/gp/product/B011296704
Intertap Self Closing Faucet Spring|$1.99 |4|7.96|https://www.morebeer.com/products/intertap-closing-faucet-spring.html
Intertap Stainless Steel Faucet Shank|$32.99 |4|131.96|https://www.morebeer.com/products/intertap-stainless-steel-faucet-shank-4.html
Duda Energy HPpvc025-100ft 100' x 1/4"" ID High Pressure Braided Clear Flexible PVC Tubing|$28.50 |1|28.5|https://www.amazon.com/gp/product/B00LX6LS7E
Brewer's Edge UX-CAOO-IQIT Keg Lube 1 oz.|$5.98 |1|5.98|https://www.amazon.com/gp/product/B0064OK99S
Hilitchi 60 Piece Adjustable 8-38mm Range Stainless Steel Worm Gear Hose Clamps Assortment Kit|$12.99 |1|12.99|https://www.amazon.com/gp/product/B01IOE4RQQ
Taprite T752HP Two Product Dual Pressure Kegerator CO2 Regulator|$89 |1|89|https://www.amazon.com/gp/product/B0060NOX40
KegWorks Beer Tap Faucet Handle Black|$4.30 |4|17.2|https://www.amazon.com/gp/product/B000VI753Q
Intertap Forward Sealing Beer Faucet (Stainless Steel)|$31.54 |4|126.16|https://www.amazon.com/gp/product/B01NAGS3ST
4 Way Co2 Manifold|$42.99 |1|42.99|http://www.farmhousebrewingsupply.com/4-way-co2-manifold/
Accuflex Bev-Seal Ultra (3/16) 50'|$15.99 |1|15.99|http://www.farmhousebrewingsupply.com/accuflex-bev-seal-ultra-3-16-50/
Pin Lock Disconnect- 1/4 MFL Gas Side|$5.99 |4|23.96|http://www.farmhousebrewingsupply.com/pin-lock-disconnect-1-4-mfl-gas-side/
Pin Lock Disconnect- 1/4 MFL Liquid Side|$5.99 |4|23.96|http://www.farmhousebrewingsupply.com/pin-lock-disconnect-1-4-mfl-liquid-side/
1/4" MFL Push To Connect|$3.79 |4|15.16|http://www.farmhousebrewingsupply.com/1-4-mfl-push-to-connect/
5/16 x 5/8 BSPP (Shank Connector) Push To Connect|$5.99 |4|23.96|http://www.farmhousebrewingsupply.com/5-16-x-5-8-bspp-shank-connector-push-to-connect/
Igloo 7.1 cu ft Chest Freezer Black|$219.99 |1|219.99|https://www.walmart.com/ip/Igloo-7-1-cu-ft-Chest-Freezer-Black/31136433
Set of Four 5 Gallon Pin Lock Kegs Used|$28.90 |4|115.6|http://www.homebrewing.org/Set-of-Four-5-Gallon-Pin-Lock-Kegs-Used_p_3179.html

20 CO2 tank|$60|1|60|craigslist

2 in. x 8 in. x 10 ft. #2 and Better Prime Douglas Fir Board|$9.86|1|9.86|http://www.homedepot.com/p/2-in-x-8-in-x-10-ft-2-and-Better-Prime-Douglas-Fir-Board-604364/206182008
ZMAX 7 in. 16-Gauge Galvanized Reinforcing L-Angle|$3.27|4|13.08|http://www.homedepot.com/p/Simpson-Strong-Tie-ZMAX-7-in-16-Gauge-Galvanized-Reinforcing-L-Angle-L70Z/100375233
||||1019.36|

You would also need a wrench if you don't have one yet to unscrew the posts on the keg.

Correct, the pressure applied to one keg, will be applied to both without regulators on each line. You'll have to disconnect the second keg to force carbonate. This would make a great Christmas present.........

So, you want to think about how many kegs you want in service at any one time. As others have mentioned, second-hand and sales are the shit. But there's something to be said for shiny and new.

A quick note in case you're not familiar with regulators. If you are, skip this. Basically when you get a tank of gas, it's holding a shitload PSI worth of gas. Whether or not the gas is in a liquid or gas state varies, but is largely irrelevant for this treatise. If you straight open that valve, it comes out at the highest speed that the nozzle on the tank will allow. So you screw on a gas regulator. The one that you attach to a tank is a primary/secondary combo. The Primary Regulator gauge is the left part of the regulator. It shows how much gas is in your tank. Co2 turns to liquid under pressure, so don't worry too much about what that gauge READS, just know that the internal mechanisms of the primary portion of the regulator are dropping 500-800PSI down to 0-100PSI or so. The second part of your regulator is the top gauge, which shows your Secondary PSI, or the output PSI, if you will. Depending on the sensitivity of the gauge and internal mechanisms, it can max out anywhere from 40-100. The screw on the front is how you adjust what PSI is coming out of that barb post at the bottom. This is the number you care most about. I only go into this much depth because when I first started kegging, I really didn't have a good grasp on these distinctions

If you plan on building a Keezer with space for 6 kegs, but only want to serve 3 at a time, I would get a single primary regulator with a secondary out and run that to an array of 6 Secondaries. That way you can carbonate and serve at variable pressures/volumes. However, even if you build that from scratch from used/new parts, it's still a pricey proposition.

Or, you could use that single regulator above and run the secondary to a 6 way manifold. The downside is each keg would receive equal pressure and therefore all carbonation in the kegs would be the same.

You could also mix and match for a more even approach: get a regulator like this and run the two outputs to two different 3-way manifold so 3 kegs could be X PSI and 3 kegs could be Y PSI. Meaning 3 kegs would be carbing and serving at 1 pressure, and 3 kegs would be carbing and serving at another.

Gonna copy and paste one of my previous replies to a similar question last year. Hopefully that helps a bit.

Your question about ballpark cost is a bit "how long is a piece of string..?". It totally depends on your choices. Mine ended up costing me around $1k all up, but I'm in Australia and everything is bloody expensive over here.

------

Recently built a keezer myself so I can offer a bit of advice. I think the main reason most people shy away from kits is they tend to bundle cheap and nasty parts. Here's a list of parts you'll need and my insights to go with them:

• Gas bottle and regulator. (If you can afford it, get a dual pressure regulator. This will allow you to serve one keg while force carbonating another).
  
  
• Gas distributor. (If you want to serve more than one keg. To add to my prior point, you can get gas distributors with individual low pressure regulators on each output. I got one that also has one-way check valves to stop beer getting back to my regulator).
  
  
• Taps. (Don't skimp here, you want nice taps. I went all out and got the Perlick 650ss, mostly for the flow control. It means I don't have to have kilometers of beer line coiled up inside my keezer to get a good pour. You'll also need shanks long enough to get through your fridge door if the taps don't come bundled with them).
  
• Quick disconnects. (Either ball or pin lock to match your kegs. I use ball locks as they're more common here in Australia but I think pin-locks are cheaper over there).
  
• Hose. (Theres more to consider here than you think and its mostly to do with balancing your system to get a good pour. Read this if you haven't already. Generally speaking though, smaller inner diameter is better. I'm using 5mm ID and 8mm OD. If you get taps with flow control, you can afford to be a little less picky with this).
  
• Fittings. (Generally speaking, you've got two main options. Barb and stepless clamps or MFL. It's really up to you how likely you are to want to move parts around. I just used the barb fittings for mine but if you're likely to change things in the future, MFL is probably smarter).
  
  I'm super happy with my system, the 650ss are awesome and let me use less than a metre of beer line. I also shelled out a little extra for a ball lock gas post and bulkhead to replace the gas-in barb on my gas manifold. That combined with another quick disconnect just lets me easily remove the gas bottle from the freezer and gas another keg for storage or something. Hope that helps a bit, feel free to ask any more questions.

Thanks! Good question. I definitely spent more than was necessary trying to figure everything out but the most expensive item was the king carousel. I was able to get it for on sale for about $45 brand new Amazon prime. Here it is but when I found it, it was on sale http://www.amazon.com/gp/product/B0055OWLFI/ref=oh_aui_detailpage_o03_s03?ie=UTF8&psc=1.


Fridge I scored for free.


I'd say for the rod extension, coupler, bolts, screws, caulk, fasteners and glue was about $30. Used these to keep the front door closed with the seal they work great! http://www.amazon.com/gp/product/B00N2H50XA/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1


The wood was one 8' board 8" x 1" I got at Home Depot and they trimmed to my specs, about $10.


The cost of stain and chalk paint 8 oz cans ~$6 each x 3 (primer for chalk) = ~$20.


I had all the keg lines already I just adapted them from old picnic taps.


Elbow shanks I got for 13.99 a piece plus shipping from Adventures In Homebrew with shipping $36.98 (46.98 actually now that i look back had a $10 credit). http://www.homebrewing.org/Chrome-Plated-Elbow-Shank_p_1187.html


Regulator off Amazon for $114.13 with Prime. http://www.amazon.com/gp/product/B0060NOX40/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1


$29.90 for both chrome faucets off amazon free shipping http://www.amazon.com/gp/product/B00370AT2Y/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1


Quick Connect I used for the top tap area $6 http://www.amazon.com/gp/product/B0000DD23N/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1


So I guess when all is said and done 292.01.


But if you have the regulator and other bits laying around it could be around $177.88.


Kinda pricey but I guess I had to use that x-mas bonus somewhere!


Oh - and the thing takes about 6 pounds of nuts and dried fruit to fill. That gets pricey but gum balls sell for pretty cheap in bulk from here http://www.gumballmachinefactory.com/gumballscandy.html

Taprite all the way. I've got a dual primary and a 5 way secondary from them, love the way they adjust and lock.

http://www.amazon.com/gp/product/B0060NOX40/ - Purchased Oct 2012, 0 complaints.

Absolutely!

Almost everything came from Amazon, it was a little more in some cases... but you cant beat their support. If something is broken its replaced immediately and I wanted that reassurance.

Here is a list of the important stuff:

Nitro Regulator: https://www.amazon.com/gp/product/B07DY9SBMB/ref=oh_aui_detailpage_o09_s01?ie=UTF8&psc=1

CO2 Regulator (dual tap):https://www.amazon.com/gp/product/B0060NOX40/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

Stout Faucet: https://www.amazon.com/gp/product/B000BO1KFY/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

Shank for the stout faucet (beer faucets came with shanks): https://www.amazon.com/gp/product/B00829HN7E/ref=oh_aui_detailpage_o09_s02?ie=UTF8&psc=1

Beer Faucets: https://www.amazon.com/gp/product/B01D6MSELA/ref=oh_aui_detailpage_o08_s00?ie=UTF8&psc=1

Thermostat: https://www.amazon.com/gp/product/B0152LYY0I/ref=oh_aui_detailpage_o09_s00?ie=UTF8&psc=1

Drip tray: https://www.amazon.com/gp/product/B002NQIROA/ref=oh_aui_detailpage_o04_s00?ie=UTF8&psc=1

This was the nitro tank (probably the best deal IMO), its a nitro coffee place but it holds beer gas fine :) - I had to use this specific one because of the space it had to fit into, I wanted everything to be self contained in my build: https://beveragelements.com/beverage_elements_shop/cold-brew-nitro-coffee/cold-brew-coffee-nitro-coffee-cylinders/23-cu-ft-nitrogen-cylinder-nitro-coffee/?gclid=Cj0KCQjwlqLdBRCKARIsAPxTGaVyfeABi5S7mFR-ByXCWkDGRbyimzJ52J-2TXkyxDyYABYQxXios2oaAiDuEALw_wcB

​

Obviously this thin wasn't cheap, but 3 tap kegerators aren't cheap either and this one does nitro! It was a decent investment spread over about 2 months of the build so that eased the pain on the wallet.

​

I have a dual regulator exactly like this. One line is for primarily force carbonating and the other goes to a manifold such as this for dispersion. The post with the manifold is always kept at serving pressure.

When I have a keg of Belgian beer, I'll keep that on the line that I usually use for force carbonating so I can keep it at a higher pressure. If I need to force carbonate at the same time that I have a Belgian beer on tap, I just remove the gas from the Belgian keg for two days while I force carb. After those two days, I put the regular beer on the main manifold gas and put the Belgian beer back on the "force carb" gas post. This method works well for me

Also, my force carbonating method is to set the pressure to 30psi for 24 hrs, then 20psi for another 24hrs and then down to serving pressure.

If he is using a dual regulator couldn't he have each manifold connected to the separate nosels? like this one?

No you do not want those. You want these. http://www.midwestsupplies.com/5-16-barbed-shutoff-valve.html

the 4 way should already come with them. You need a way to turn the CO2 on and off as well as preventing any beer from back flowing into your gas lines. These will accomplish that

I currently have this one. http://www.amazon.com/Taprite-Product-Pressure-Kegerator-Regulator/dp/B0060NOX40

That is a good price for the 4 way

My regulator is this -https://www.amazon.com/gp/product/B0060NOX40/ It says it doesn't need a washer. I've closed the gas line valves and it sat fine.

A word of warning about Taprite: I would definitely recommend testing everything in a quiet room before actually hooking up any hoses/disconnects/etc... just the regulator and a CO2 tank.

I purchased a new 4-way secondary regulator last year. Lost most of the first 20# tank... I didn't notice that one of the gauges was audibly leaking from the pressure relief valve for quite a while, because I didn't hear it over the fan I use to circulate air in the keezer. It wasn't until turning it up to 40PSI to burst carb a keg that I noticed it.

Went back and forth with customer service for a while trying various things. I finally disassembled the valve and found an o-ring that was obviously bad (visibly rough on one side, like it was stamped from a damaged sheet), so definitely not a shipping problem. The gauges all had QC stickers on them, but this had clearly not been tested very well... once I took it out of the keezer I could hear the leak as low as < 5PSI. It then took about a month before I had a replacement o-ring in hand.

Around the same time I also purchased a 2-way primary which showed up with a non-working high pressure gauge. This one though, I don't know for sure wasn't damaged in shipping.

I've had other Taprite regulators for years with no problems, so not sure if this is just bad luck or if something has changed.

EDIT: I should probably point out though that I would still purchase from taprite because while it was overall annoying, customer service was responsive, directed me to finding the problem, and shipped me a part to fix it. I would definitely be more thorough with my own testing though.

Very good than. Now you can just piece the rest togethers. For the Regulators, I'd recommend the Taprite T752HP. These regulators are awesome, super accurate and the knobs lock. 20-30' of 3/16" of Bev Line. Buy your gas in and liquid out keg fittings, some hose clamps and cobra taps. You should be able to get all that and a tank for not much more than $200 if you already have the kegs. Faucets will run you $40-50 a piece for a decent faucet and shank.

[Used Kegging Equipment - ID and Setup]

Relevant

1. What's the deal with the [Regulator <-> Tank] O-ring here? It's built in (Keg lube and get moving), or replace with something? Looks a little janky.
   
   
2. What "standard" is the connection [Regular <-> Keg] out of the bottom here? If I was going to add a "splitter" to support two kegs (at the same pressure), what would be the smartest way to modify this? It appears to be 1/4".
   
   Tangent
   
   
3. I understand the restriction/pressure-math for [Liquid Side] lines being 3/16", but why are so many [Gas Side] setups 1/4"? Especially when kick ass Taprite regulators are outputting 5/16" naturally? Seems like a lot of run around to get this double-body connected to a Ball Lock - What am I missing?
   
   Thanks!

That makes sense. I see one on Amazon for $89, so I know what the price range I'd be looking at is. I figured it was that easy, but I wanted confirmation before I leapt before I looked.

I'm looking to purchase the parts for a 2 tap sankey kegerator and wanted some feedback on before I go ahead and order. everything is through amazon because I have a large amazon gift card.

I already have 2 intertap flow control faucets

coupler-kegco KTS97D-W x2

beer line assembly x2

10 feet of gas line

20# luxfer co2 tank

taprite dual regulator

intertap shanks x2


I'm hoping to pick up a used chest freezer on craigslist. Anything I'm missing? Anything I should change?

Taprite T752HP Two Product Dual Pressure Kegerator CO2 Regulator https://www.amazon.com/dp/B0060NOX40/ref=cm_sw_r_cp_api_Wh0FAb87R778N

88 bucks. This is the one I have. Works great.