Reddit reviews Tektro Front Cable Hanger Black Canti Fork Mount

This fork mount solved all of my shudder issues. Unless you feel like throwing all sorts of money at the problem I'd suggest you try this first. https://www.amazon.com/gp/product/B006GHDRYC/

Maybe one of Problem Solver's cable hangers might help?

http://problemsolversbike.com/products/cross_hangers

Or one of Origin8/Tektro's hangers that fork mount?

http://www.amazon.com/gp/product/B006GHDRYC

On my piece of shit Fuji Marlboro folding bike, I use the Origin8 fork mounted hanger, and it makes the amount of cable from hanger very short.

Here's one on Amazon.

I know this was a while ago, but I bought this with my 2013 Steilacoom RCX and just replaced it. I got a bolt/washer at Home Depot for $3 and I highly recommend it:

http://www.amazon.com/Tektro-Front-Cable-Hanger-Black/dp/B006GHDRYC/ref=sr_1_4

If your fork has a fender mount hole (though the steerer, below the crown), you can use a fork mount derailleur hanger instead of the above the headset orginal version. I used one on this bike

I have the 2012 (I think) version of this bike. I like it a lot (not love, but like). One of my biggest issues is the brakes. They really suck. Three recommendations are:

• Fork crown cable hanger (improved performance, reduced shudder)
  
• Salmon break pads (they make a big difference)
  
• In-line cable barrel adjusters. They aren't stock on the bike but make adjustments much easier
  
  Other than that, just ride it well. Keep it lubed. I don't keep my very clean but I should. Also, if there is ever the opportunity, have your shop spray FrameSaver into the tubes to help protect them.

If you've got a hole in your fork for it, go with a fork mounted cable hanger. I'm 6'3", and have a long head tube, so hard braking would give me the dreaded canti-shudder. The fork mounted hanger fixed it, and braking is greatly improved.

http://www.amazon.com/Tektro-Front-Cable-Hanger-Black/dp/B006GHDRYC

If you stick with Cantilever brakes (I did) then I would suggest this tektro fork mount cable hanger instead: https://www.amazon.com/Tektro-Front-Cable-Hanger-Black/dp/B006GHDRYC/ref=asc_df_B006GHDRYC/?tag=hyprod-20&linkCode=df0&hvadid=312111916046&hvpos=1o3&hvnetw=g&hvrand=9209235087896262264&hvpone=&hvptwo=&hvqmt=&hvdev=t&hvdvcmdl=&hvlocint=&hvlocphy=1020929&hvtargid=pla-568555982053&psc=1
I bought one like the one you linked to, but returned it for the post mounted one. More stable and easier to mess with. But you will need to get a longer mounting bolt. I just took it to ace hardware and they found me the right bolt for a buck or two.

Get a crown-mounted cable stop. Replace the old one with a spacer. Repair the threads with cutting die, thread file or needle file.

I can't take credit for solving anything. I bought it on Amazon.

I have cantis on my cross bike and they work just fine. I recommend a fork mounted cable hanger if your fork can hold one.

https://www.amazon.com/Tektro-Front-Cable-Hanger-Black/dp/B006GHDRYC