Reddit reviews Thermaltake Dual 24-Pin Mining Adapter Cable (AC-005-CNONAN-P1)
We found 10 Reddit comments about Thermaltake Dual 24-Pin Mining Adapter Cable (AC-005-CNONAN-P1). Here are the top ones, ranked by their Reddit score.
Perfect for Crypto currency Mining BuildsSupport Extreme multi-GPU ConfigurationsNo switch/PCB Required150mm Length Cable1 Year Warranty
https://www.amazon.com/Thermaltake-24-Pin-Mining-Adapter-AC-005-CNONAN-P1/dp/B00O0M6Q0C/ref=sr_1_1?ie=UTF8&qid=1511302439&sr=8-1&keywords=thermaltake+adapter
or just use the simple paperclip method to turn on the secondary psu google it.
and yes it is much cheaper to buy 2 x 750w's than a 1500w for sure.
Gotta get one of these for multiple PSUs:
>https://www.amazon.com/Thermaltake-24-Pin-Mining-Adapter-AC-005-CNONAN-P1/dp/B00O0M6Q0C/
yes, but you'll need to do something so they both turn on, such as one of these: https://www.amazon.com/Thermaltake-24-Pin-Mining-Adapter-AC-005-CNONAN-P1/dp/B00O0M6Q0C
Or just do the paperclip method. It's not 100% safe though…
Hey u/jimmy_007vn,
Assuming you're talking about this PSU. If you are, this PSU can power 3 Vega cards and whatever risers you'd need. The risers will be connected to the SATA rails that come from the PSU.
Currently there are 3 types of risers:
Molex/SATA
SATA/6-pin
SATA
All three of these types of risers will be connected to the PSU rails directly. You don't need to buy a pin converter. You'll just need two power supplies and a power supply connector so that you can run 6 cards.
I have personally tested the Molex/SATA and the SATA risers, and I personally like the SATA risers. The Molex/SATA risers have melted twice on me, causing two GPUs to ruin themselves(this occured at different times). The SATA only riser is currently the best I have used. I have not had a melting issue like I did with Molex/SATA. I have bought some of the newer 6-pin risers to test after reading that they are supposedly safer than previous riser types.
The electricity used by the risers will be negligible, and you don't have to worry about overloading your 1000w PSU.
I hope this helped.
You'll need one of these "Dual 24-Pin Adapter Cable"'s:
https://www.amazon.ca/gp/product/B00O0M6Q0C/ref=oh_aui_detailpage_o05_s00?ie=UTF8&psc=1
On that diagram you use a device called add2PSU. You can also replace it with a 24pin splitter like this one https://www.amazon.ca/Thermaltake-24-Pin-Mining-Adapter-AC-005-CNONAN-P1/dp/B00O0M6Q0C/ref=pd_sim_147_22?_encoding=UTF8&psc=1&refRID=CQE2K89XFDW4BP1X8YEJ
so a 750W 80+ bronze it's in fact a 600W PSU, the price diff it's big between 750W (~70$) and 1000W (~180$) (EVGA) it's there a way to use two PSU? I found this: https://www.amazon.com/Thermaltake-24-Pin-Mining-Adapter-AC-005-CNONAN-P1/dp/B00O0M6Q0C
Thanks for the replies!!!
EDIT: Forgot to add that the CPU it's a Celeron G3930 51W
Worst case scenario, you can't return them, you could probably just get a second power supply and use one of these: https://www.amazon.com/Thermaltake-24-Pin-Mining-Adapter-AC-005-CNONAN-P1/dp/B00O0M6Q0C/ref=sr_1_1?ie=UTF8&qid=1497393873&sr=8-1
No point buying a 1300w PSU. Just buy two 750 watt PSU's it'll cost you less than a 1300 watt and it'll give you 1500 watts of power. Then use one of these which is only $7 so that you can use 2 PSUs with one motherboard.
flipping the switch on a PSU doesn't turn it on by itself, you have to either jumper 2 specific pins in the 24 pin of the second PSU or you have to buy one of these kinds of things https://www.amazon.com/Thermaltake-24-Pin-Mining-Adapter-AC-005-CNONAN-P1/dp/B00O0M6Q0C/ref=pd_lpo_sbs_23_t_0?_encoding=UTF8&psc=1&refRID=F2YHN4BT2VDFN1G0WXTQ so that the Second PSU gets an on/off signal from the power button on your PC