Reddit reviews TRENDnet 16-Port Unmanaged Gigabit GREENnet Desktop Metal Switch, TEG-S16DG, Ethernet Splitter, Ethernet/Network Switch, 16 x 10/100/1000 RJ-45 Ports, 32 Gbps Forwarding Capacity, Lifetime Protection,Black
We found 11 Reddit comments about TRENDnet 16-Port Unmanaged Gigabit GREENnet Desktop Metal Switch, TEG-S16DG, Ethernet Splitter, Ethernet/Network Switch, 16 x 10/100/1000 RJ-45 Ports, 32 Gbps Forwarding Capacity, Lifetime Protection,Black. Here are the top ones, ranked by their Reddit score.
ETHERNET PORT CONFIGURATION: 16 Gigabit RJ 45 ports provide high speed network connections to devices and a 32 Gbps switching capacity allows data traffic to flow smoothly, reducing traffic bottlenecks.DESKTOP DESIGN: Compact and sturdy metal Ethernet desktop gigabit switch housing design is well suited for desktop installations. Its fanless design is perfect for quiet environments that require silent operation.ENERGY SAVINGS: Embedded GREENnet technology provides cost savings and reduces power consumption by up to 70 percent, by limiting port power consumption during periods of low link utilization.MOUNTING OPTIONS: Optional Rack Mount (sold separately) Rack mountable with ETH 11MK rack mount brackets.PLUG AND PLAY: Simply power up the switch and plug in connected devices. No software to install or configuration needed.LOW NOISE OPERATION: Fanless design lowers energy consumption and eliminates operating noiseTRENDnet LIFETIME PROTECTION: Lifetime TRENDnet Manufacturer Warranty
Your budget is looooooowww.
That said, what do you need. Router, switch, and WAPs?
Ubiquiti can handle the wireless side of the network very well.
Trendnet has some very reasonably priced switches.
Asus makes some really great home all in one routers. But it might not be the best option for your set up. Maybe a Ubiquiti EL, but I'm not sure you'd be able to configure the thing. We need more information from you.
I use this switch and it works great.
https://www.amazon.com/gp/product/B0044GJ516/ref=oh_aui_search_detailpage
edit: this was supposed to be a reply to the switch recommendation.
http://www.amazon.com/TRENDnet-16-Port-Unmanaged-GREENnet-TEG-S16DG/dp/B0044GJ516
I'll preface this by saying i'm still very basic to networking so someone correct me if i'm wrong please.
It sounds like you're in need of a switch (unmanaged if you want to plug it in and not configure anything). Here are a couple I found with a quick google search (I have no opinion on either of these, they were just the first thing that came up with a google search.
Rackmount: https://www.amazon.com/TP-Link-Ethernet-Unmanaged-Rackmount-TL-SG1016/dp/B002HAJQGA
Desktop: https://www.amazon.com/TRENDnet-16-Port-Unmanaged-GREENnet-TEG-S16DG/dp/B0044GJ516
I believe the setup for this would be the run from the router coming into the closet, plugged into maybe port 16 of the switch, then ports 1 through 12 are plugged into the front of the patch panel, and the cable runs to each room are punched into the back of the patch panel.
Again, i'm still basically brand new at this, so please someone tell me if this is wrong.
trendnet makes some cheap stuff.
http://www.amazon.com/TRENDnet-16-Port-Unmanaged-GREENnet-TEG-S16DG/dp/B0044GJ516
Get the cabling done. There's really no substitute. Then, you'll want these...
UniFi Security Gateway router
2-4 UniFi AP AC Lites. Start with one per floor, add more if needed. They work best when ceiling mounted. If you have any devices that support more than two 5 GHz streams, you'll want at least one NanoHD for them to reach full speed.
A switch of some sort, ideally a PoE one. Ubiquiti's is the best choice, but is expensive. You could instead go with a cheaper PoE switch, or even a non-PoE one and use the PoE injectors supplied with the APs to power them. The cheapest way to have both PoE and lots of ports is to get a small PoE switch and a big non-PoE one and connect them together.
Optionally, a Raspberry Pi. This will be for running the UniFi Controller, which manages all the UniFi devices, and Pi-Hole, a whole-network adblocker. You'll need a MicroSD card for it as well.
>only box I can find is the breaker box and none of the switches say anything about the ports
I don't think you're understanding the use of the term 'switch' in his comment.
Typically if you have ethernet ports in your home the cabling in the back of the wall panels will run through the walls and terminate in a patch panel somewhere. From the patch panel there should be short cables that run into a network switch. It's that network switch that then connects into your internet service... this way all the ports around the house can have access to the internet.
​
If the previous owner/tenant has taken their network switch with them when they moved out you'll need to replace it with a new one.
I like trendnet, never had any problems and pretty cheap.
16-Port ($88.69): http://www.amazon.com/TRENDnet-16-Port-Gigabit-GREENnet-TEG-S16DG/dp/B0044GJ516/ref=pd_sim_e_3
24-Port ($102.25): http://www.amazon.com/TRENDnet-Unmanaged-GREENnet-Auto-MDIX-TEG-S24Dg/dp/B0044GH27U/ref=sr_1_8?s=electronics&ie=UTF8
I asked because I don't know if this will make much difference:
TP-Link TL-SG1008D
10Gbps Switching Capacity
15K Jumbo Frame
TRENDnet 16-port TEG-S16DG
32Gbps Switching Capacity
10KB Jumbo Frame
Something like... ?
Unmanaged -- https://www.amazon.com/dp/B0044GJ516/
Managed -- https://www.amazon.com/dp/B0721V1TGV/
I'd say it'd be worth it. What switch are you considering purchasing? I really like Trendnet switches, if you're up for suggestions on what to purchase. Here's a 16-port gigabit switch they offer for $77: http://www.amazon.com/TRENDnet-16-Port-Unmanaged-GREENnet-TEG-S16DG/dp/B0044GJ516