Reddit Reddit reviews UGREEN SATA to USB 3.0 Adapter Cable for 3.5/2.5 Inch SSD HDD SATA III Hard Drive Disk Converter Support UASP Compatible with Samsung Seagate WD SanDisk Hitachi Toshiba, with 12V Power Adapter

We found 18 Reddit comments about UGREEN SATA to USB 3.0 Adapter Cable for 3.5/2.5 Inch SSD HDD SATA III Hard Drive Disk Converter Support UASP Compatible with Samsung Seagate WD SanDisk Hitachi Toshiba, with 12V Power Adapter. Here are the top ones, ranked by their Reddit score.

Computer Accessories & Peripherals
Computer Cables & Interconnects
Electronics
Computers & Accessories
UGREEN SATA to USB 3.0 Adapter Cable for 3.5/2.5 Inch SSD HDD SATA III Hard Drive Disk Converter Support UASP Compatible with Samsung Seagate WD SanDisk Hitachi Toshiba, with 12V Power Adapter
Easy Hard Drive Access: The USB 3.0 to SATA adapter allows you to connect a 3.5/2.5" SATA SSD HDD with your computer to expand storage, upgrade system, back up files, retrieve and recover data, and transfer data. It is awsome for booting up old spare hard disks and recovering important files of broken PC.5gbps with Uasp Accelerated: Supports data transfer up to 5 Gbps. SAVE TIME WITH UASP: This sata to usb adapter supports UASP Technology, which is 70% Faster than traditional USB 3.0 and 80% reduction in required processor resources, which enables you to utilize the full potential of your SATA III SSD/HDD, when paired with a UASP-enabled host controller.Plug & Play Simple Operation: No need to install driver or install the SSD/HDD inside an enclosure, just plug and play. Hot-swap supported. Always eject the hard drive safely before unplug the adapter from your computer incase of data loss.12V 2A Power Adapter Included: This adapter cable is equipped with a DC-Jack port and comes with a 12V/2A Power Adapter, which guarantees enough power supply for 3.5" hard drive. Please be kindly noted that power supply is necessarily required if a 3.5" SATA HDD SSD is connected.Wide Compatibility: This SATA III to USB 3.0 adapter is compatible with PS4, Xbox, Windows 10/8.1/8/7/Vista/XP, Mac OS. Supports 2.5/3.5 '' SATA HDD SSD up to 12TB max. Compatible with WD Blue 3.5 HDD,Seagate Barracuda,Seagate IronWolf,Crucial MX500 SSD, Samsung 860 EVO SSD 2.5,ADATA SU800,DREVO X1 PRO,PNY CS900, etc.
Check price on Amazon

18 Reddit comments about UGREEN SATA to USB 3.0 Adapter Cable for 3.5/2.5 Inch SSD HDD SATA III Hard Drive Disk Converter Support UASP Compatible with Samsung Seagate WD SanDisk Hitachi Toshiba, with 12V Power Adapter:

u/windowswill · 54 pointsr/computers

Instead of simply downvoting your post or comments, I'm going to answer your question.

You will need a SATA to USB adapter with a separate power source. They come in packages together for the exact purpose you are needing them for. You can usually find them on Amazon.com if you're in the USA: https://www.amazon.com/UGREEN-Drive-Adapter-Converter-Support/dp/B00MYU0EAU/ref=sr_1_5?s=pc&ie=UTF8&qid=1549736580&sr=1-5&keywords=sata+to+usb

Or if you are in Canada: https://www.amazon.ca/UGREEN-Converter-Adapter-2-5-3-5Inch-Supports/dp/B016JTH8FA/ref=sr_1_5?ie=UTF8&qid=1549736658&sr=8-5&keywords=sata+to+usb

Or if you are in the UK: https://www.amazon.co.uk/UGREEN-Adapter-Drive-Supported-Converter/dp/B01GIZSC9G/ref=sr_1_6?ie=UTF8&qid=1549736706&sr=8-6&keywords=sata+to+usb

You will need the separate power adapter because the hard drive you have is a full size 3.5" hard drive and requires more power than a USB port can provide.

u/PaulAndrewAnderson58 · 4 pointsr/linux4noobs

Agreed with the others comments here, reinstall. But to add to that; if there are other issues which prevent it, what I often do -- when everything else fails -- is pull out the HDD, connect it to another Linux system via a SATA-to-USB cable and reformat all of it (I use GParted) in Ext4, put it back and then install any fresh new Linux Distro flavor desired.

https://linux-os-install.blogspot.com

u/crash369 · 3 pointsr/buildapcsales

No, I don't think it will. It specifically states for "2.5-inch drives", while the deal HD is 3.5 inch.

You would need something like https://smile.amazon.com/UGREEN-Adapter-Cable-Converter-Supports/dp/B00MYU0EAU .

Note that in the product description, it says that you need to plug the adapter into a wall outlet for it to support a 3.5 inch drive (which is what /u/Bjandthekatz keeps saying).

Note: I don't know anything about the linked adapter or its quality, just using it as an example. Hope this helps.

u/umos199 · 2 pointsr/pcmasterrace

Then This should be what you want.


or for higher powered drives that cannot be powered through USB you will need something like This

u/Taymurf · 1 pointr/synology

This looks like it should do the trick, thanks for the heads up. Do you think a windows format (not the quick format but the full) will be sufficient to wipe all of my data from the drive?

u/ssps · 1 pointr/synology

It’s entirely possible the disk is bad. You can return it to amazon and get a replacement; but as others suggested it would be good to attach I it to the pc to use WD tools to run diagnostics.

If you don’t have usb to Sata bridge — buy one, something like this (make sure it’s powered) https://www.amazon.com/UGREEN-Cable-Adapter-Converter-Support/dp/B00MYU0EAU/

It’s extremely useful to have one around the house. When your drives fail down the road (note how I sat “when”, not “if”) you would need to get diagnostic code using WD tools to request warranty replacement.

It is also possible that the ram in your nas is bad. You can run memory test via Synology Assistant.

u/smartphonerepairwi · 1 pointr/computerrepair

UGREEN SATA to USB Cable USB 3.0 to Hard Drive Adapter Converter for 2.5 3.5 Inch Hard Drive Disk HDD SATA III and SSD Support UASP with 12V 2A Power Adapter https://www.amazon.com/dp/B00MYU0EAU/ref=cm_sw_r_cp_apa_i_1GM2DbMZ5J5W4 This the one I currently use for data extraction. It works amazing. Best $18 I've spent. A specialist is going to be very expensive especially for data recovery. Either way whichever route you choose. Best of luck.

u/Hankune · 1 pointr/macbookpro

> https://www.amazon.com/UGREEN-Drive-Adapter-Converter-Support/dp/B00MYU0EAU

What are some keywords I need to know to buy an alternative? is it 2.5''?

u/VoenixRising100 · 1 pointr/macbookpro

Something like this will work. There are cheaper varieties. https://www.amazon.com/UGREEN-Drive-Adapter-Converter-Support/dp/B00MYU0EAU

u/chrisimplicity · 1 pointr/mac

Thanks. Unfortunately, the display is dead in the old iMac, so I can’t configure anything on it. I’ve read about SATA to USB. Do you know if this will work? I don’t know the steps to transfer data, but I’m sure it’s easy to find online.

If I connect an external monitor via rear ports on the old iMac, do you know if it will plug and play or if I will need the old iMac display active?

u/XmentalX · 1 pointr/techsupport

Are you looking to transfer personal files or apps?

If files https://www.amazon.com/UGREEN-Drive-Adapter-Converter-Support/dp/B00MYU0EAU/ will work fine to read the drive.

It apps it gets considerably more complicated.

u/gonenutsbrb · 1 pointr/datarecovery

This is one of the most simple forms of recovery. But the odds are against you depending on how much data you need recovered if you have already installed and run programs over the same drive.

What RecoveryForce means in slightly less obscure language is you need to pull the drive out of the computer, and connect to another computer. You can do this by attaching the drive normally via SATA or via a SATA to USB adapter like this one. Once you have the drive attached, install and run Recuva on that computer, making extremely sure not to recover the files to the drive you are recovering from.

Note, as the drive has already been used for a while after the deletion, you may not recovering everything, and by connecting the drive to any system in this manner, there may some inadvertent small writes that may further corrupt what you are trying to recover. What you recover may have corruption in it.

This is a doable self-recovery, but you should be careful and if anything in the missing data is missing critical, seeking professional assistance isn’t the worst idea. But my primary advice is that you can do this by yourself if you are careful, and that if data has been written over, there is nothing a professional can do to get that back. You would still end up with the same corrupted files.

u/Amj161 · 1 pointr/homelab

When it comes to an external power supply, the closest I see is something like this (but this is for internal hard drives)

Or should I get some kind of USB splitter with power? Like this

u/benuntu · 1 pointr/DataHoarder

Yep, that would work fine. Or even cheaper, just an adapter like this one.

I use CrystalDiskInfo, download link here: https://osdn.net/projects/crystaldiskinfo/downloads/71284/CrystalDiskInfo8_2_0.exe/

It's an easy way to look at the SMART data, number of hours, errors, etc. on any drive.

u/lmakeltraln · 0 pointsr/techsupportmacgyver

its probably all powered wrong bro, that board probably is wired to supply enough juice for 3.5" drives probably too much for 2.5".

buy yourself a kit and save the headache
https://www.amazon.com/UGREEN-Drive-Adapter-Converter-Support/dp/B00MYU0EAU/ref=sr_1_2_sspa?ie=UTF8&qid=1542724376&sr=8-2-spons&keywords=usb+sata+adapter&psc=1

u/plexguy · 0 pointsr/techsupport

If you want to see what is on them, you could buy a USB to SATA adapter (I'm assuming they are SATA drives). Make sure you get one that also provides power to the drive, again I'm assuming these are 3.5 inch desktop drives, and not the smaller 2.5 inch notebook drives that can be powered from USB. This would allow you to see what is on the drive, and copy any data before your format the drive.

Here is an example of what I am talking about:
https://www.amazon.com/UGREEN-Drive-Adapter-Converter-Support/dp/B00MYU0EAU/ref=sr_1_3?s=electronics&ie=UTF8&qid=1549763289&sr=1-3&keywords=3.5+sata+hard+drive+to+usb+cable

As far as wiping them, just use the Windows format command. There is also free software utilities such as Crystal disk that can test your drive for errors. Formatting might fix it, by moving bad sectors to areas where you can't use them. Since they are old disks, and if they have a lot of errors you might not want to keep using them, as they might only get worse, and new drives are pretty cheap now. Pretty much depends on how important the data is to you and how much you want to mess with the drives versus buying a new drive. To me any increase in chance of losing data makes me want to stop using the drive at all.