Reddit Reddit reviews Vallejo Airbrush Flow Improver 200ml Paint Set

We found 13 Reddit comments about Vallejo Airbrush Flow Improver 200ml Paint Set. Here are the top ones, ranked by their Reddit score.

Toys & Games
Hobbies
Hobby Tool Paints
Hobby Building Tools & Hardware
Vallejo Airbrush Flow Improver 200ml Paint Set
Each bottle contains an eyedropper deviceImprove flow through needle on Air BrushPresented in plastic bottles of 200ml
Check price on Amazon

13 Reddit comments about Vallejo Airbrush Flow Improver 200ml Paint Set:

u/Hvstle · 2 pointsr/Airbrushing

I think it's cool you want to pick up a hobby your father had. It will be a nice reminder every time you pick up the gun.

I use this 100% for miniatures, and it works great!!

​

Alright, here is the list I bought. It's a bit more than you want to spend, but this will ensure you can get going right away, and not be frustrated. I did a fair amount of research on different forums, sites, and youtube videos. If you want to know why I chose something, feel free to ask. I was going to bold the ones that you absolutely need, but I would say everything in the first set are a must.

​

u/dravenhavok · 2 pointsr/minipainting

Use aribrush flow improver rather than thinner if you're doing a lot of air brushing, it slows down the drying on the paint and prevents buildups on the tip. I like the this kind.

u/metalt · 2 pointsr/Warhammer40k

Stuff that you need:

  • Compressor - What I use There are lots of different compressors out there but you want to at least get one that is designed for airbrushing IE: oil-less and preferably one with a tank. Airbrush compressors are designed to be quiet as opposed to like a shop compressor that is loud as fuck.

  • Airbrush - What I use This is an Iawata eclipse which is more on the expensive side but honestly since the airbrush is what is doing all of the work I opted for quality here. This is not to say that you cannot find good quality airbrushes for less but this particular name and model is fairly well known for being one of the best. You might want to shop around on this one to find one within your budget. The main thing is that you want gravity feed with the cup on the top of the airbrush, and dual action meaning that you press the trigger down for air only and pull back for paint. Single action airbrushes (paint and air together when you depress the trigger) are garbage.

  • Airbrush Flow Improver - link This is what makes airbrushing thick acrylics especially GW paints possible. It allows you to thin down the paints while maintaining good coverage but won't speed up drying time like thinner or pure water will.

  • Misc other stuff - You will also want latex gloves for the hand that you hold models with. Find at auto parts stores or in the first aid section of a drug store in boxes of 100. Masks, either the paper disposable ones or get a painters respirator mask at the hardware store. Simple Green for cleaning your airbrush. I run a full paint cup of it through followed by a full paint cup of water in between colors and when I finish for the day. Gun/Pistol oil for oiling up the moving parts of the airbrush. Find at any place that sells firearms (walmart, academy, outdoor goods stores). I use it to oil up the trigger, as well as all of the threading. I also dip the needle itself in the oil which lightly lubricates the spray nozzle and helps to prevent clogs.

  • Final tip - everything that I learned about airbrushing I have learned from this dude on youtube: Next Level Painting I suggest watching his videos as well as videos from other youtubers to avoid a lot of trial and error. Lastly ... don't be intimidated... it takes practice but once you feel comfortable with using the airbrush it really ups your painting game.
u/windupmonkeys · 1 pointr/modelmakers

For Vallejo, you should consider getting some flow improver (their version of paint retarder.). See: https://www.amazon.com/Vallejo-Airbrush-Improver-200ml-Paint/dp/B00QD780G0

Vallejo has a bad tendency to dry tip the brush. Water does work as a thinner.

Tamiya thins with alcohol. It's dead simple to work with by comparison, and works even better with lacquer thinner that they make (referred to as X-20 thinner; X-20A is specifically for the acrylics, but frankly, it works better with the lacquer thinner). The branded acrylic thinner is largely alcohol with some additional additives. They also make a standalone paint retarder, for brush painting and if you need longer working time.

There is no fixed PSI setting that works perfectly every time, nor is there a permanently fixed ratio. It's a ballpark figure. Spray to clear between colors or as it starts to jam up, then finally, spray clear with thinner, clean with cotton swabs the nozzle, needle, and paint cup when done.

It's not as complicated a process that you're making it out to be.

u/ithinarine · 1 pointr/Warhammer40k

I use mostly Warcolours paints, which are listed on their website as "designed for use with paint brush and/or airbrush", but you need to thin them out quite a bit. I use Vallejo Airbrush Flow Improver to thin them down.

Don't use any Citadel paints in an airbrush, besides their new Air paints. The pigment particles in their regular paints are too large, and will clog up your airbrush no matter how much you thin them.

I've never tried any Vallejo paint of any kind, so I have no opinion on them. I just back in to the hobby with 8th Edition, and read nothing but good things about Warcolours paints, so I bought the full line (literally). All base coats, all layers, all metallics, something like 140 paints. Last time I played, I never used anything but Citadel, and I remember them being such a pain to use because they are so thick, and seem to dry out extremely quickly. The Warcolours paints have the awesome dropper bottles like Vallejo, which makes it super easy mix, and keep them air tight.

I still use Citadel for washes and shades, and some metallics, they probably have the best metallics.

u/Borken2 · 1 pointr/Warhammer40k

Thin your citadel paints with some flow improver and a little water and they'll work great with an airbrush. I personally use vallejo flow improver: https://www.amazon.co.uk/Vallejo-Improver-Airbrush-Model-Bottle/dp/B00QD780G0

u/DefiantBidet · 1 pointr/Airbrushing

thinner makes it dry faster. so i agree with the other commenter its drying too fast. if you want to make it thinner to spray just use a flow improver - which slows down drying. i use liquitex flow aid (its like a 20:1 ratio of water to flowaid so it lasts forever). I've heard good things about vallejo flow improver as well.

i use tamiya paints often. i don't use thinner often... really only with clear coats. most tamiya just need a flow improver

u/tyrified · 1 pointr/Warhammer

Water screws with the pigment distribution, I would suggest going to a hobby store (much cheaper than amazon) and picking up a bottle of airbrush flow improver. It will suspend the pigment much better than water, giving you an even distribution of paint. It is really evident when you do larger surfaces.

u/beltedgalaxy · 1 pointr/modelmakers
u/IxI_DUCK_IxI · 1 pointr/Warhammer40k

Looks like everything you would need! Good choices :-)

While you don't need this right away, you may want to consider it:

http://www.amazon.com/Vallejo-Airbrush-Improver-200ml-Paint/dp/B00QD780G0?ie=UTF8&keywords=flow%20improver%20airbrush&qid=1463514084&ref_=sr_1_1&sr=8-1

It really helps to let the paint run in the airbrush and doesn't "Gob up" on the tip of the needle. It's not mandatory while you're learning how to use the airbrush (It's not mandatory at all actually) but it helps to improve the quality of what you're painting.

I hope to see some pics of your finished work soon! :-D

u/WeaselStink · 1 pointr/Warhammer40k

Looks good! That's a great setup, better than what I am working with.

I'd suggest adding a few things before ordering:

http://www.amazon.com/Vallejo-Airbrush-Improver-200ml-Paint/dp/B00QD780G0 (Buy it!! Trust me)

http://www.amazon.com/Yueton-Nylon-Nozzle-Brush-Handle/dp/B010NDQWLE (Will need for cleaning)

http://www.amazon.com/Plaid-44250-30-Piece-Craft-Brush/dp/B003ZZ3PHW (Cheap, disposable and super useful for mixing in bowl, won't scar the sides.... Cheaper at Wal-Mart)

u/FrostiiLoL · 1 pointr/Warhammer40k

Vallejo Flow Improver on Amazon. And I found this description on the internet: This additive increases the flow of acrylic colours, by breaking down the surface tension of the water. It is ideal for the application of areas of flat and even colour without changing colour strength.