Reddit Reddit reviews Vector Thunderbird Butane Torch Insert

We found 32 Reddit comments about Vector Thunderbird Butane Torch Insert. Here are the top ones, ranked by their Reddit score.

Health & Personal Care
Household Supplies
Vector Thunderbird Butane Torch Insert
POWERFUL TORCH FLAME - Wind resistant torch flame will keep your fire lit under any conditions whether you’re camping or just outside in the elementsADAPTABLE – Fits onto most flip-top lighters including Zippo, turn any lighter into an electric torch lighterODORLESS – Uses butane fuel instead of lighter fluid to keep your clothes, car & hands smelling freshHASSLEESS - Avoid hassles of liquid lighter fuel with convenient odorless butaneREUSABLE – Reliable flint ignition system means you’ll always get a spark so long as there is flint
Check price on Amazon

32 Reddit comments about Vector Thunderbird Butane Torch Insert:

u/Scarecrow398 · 12 pointsr/LearnUselessTalents

It's not the flame, it's the smell from the fluid. If you let the flame burn for a few seconds and burn off any excess fuel in the wick before lighting the cigar and don't touch the flame to the cigar it's fine.

...Or you could just get a Zippo Blu or a butane insert

u/gabrieltjones · 9 pointsr/eldertrees

Geta zippo body. Vector makes refillable butane inserts. No lighter fluid taste or smell, no lighter fluid evaporating and leaveing you flameless. They make jet torch insert single an double flame , soft flame like a bic, and a side lighting pipe lighter.

https://www.amazon.com/dp/B008Z8W714/ref=cm_sw_r_cp_apa_5RTszbKV09T9B
https://www.amazon.com/dp/B003IRLBUA/ref=cm_sw_r_cp_apa_QUTszb1SPMKM9

Edit.
Plus getting antique zippos lighters at thrift shop are cheaper than new ones usally.

u/V39210 · 7 pointsr/supremeclothing

No, not that I know of. The lighter fluid evaporates away so if you keep it in a tight pants pocket it might last a bit longer.

And then there’s this: https://www.amazon.com/dp/B008Z8W714/ref=cm_sw_r_cp_awdb_t1_8HI3CbNN6BF3M

u/breaks_it · 5 pointsr/ShitAmericansSay

Isn't it just a regular Zippo with a 13 dollar insert?. Or do you mean you'd been looking for that particular design?

u/ZuesAgeddon · 4 pointsr/vaporents

You can get a torch insert for your Zippo. I've been thinking of one since I have a cool Zippo cover but I haven't done much research yet to see if they work well, here is one on Amazon

u/Siphon1 · 4 pointsr/Zippo

Here's the link

Also, I dont know how finicky these are with types of butane. A guy on r/cigars mentioned that he had been smoking cigars for 25 years and had tried all sorts of butane. He uses Newport Butane It's cheaper to buy this stuff 2-4 cans at a time. Usually the more you order (at least on amazon) the better the deal. Pure butane wont clog the lighter like some cheaper butane can.

And please search youtube for how to properly fill and un-fill butane lighters.

Lastly a tip I found on the packaging before throwing it away: Do not press the ignition switch hard and fast, just gradually push it. I was having to press the button 1-2 times to get it to start but since Ive started pressing it softer, it lights on the first shot each time. The best way I can think to explain it is to press it as if you were really tired and relaxed. You'll hear the gas release about 1/8 of a second little before the button clicks.

Also the flame is adjustable. The pic shows a medium flame.

u/collierar · 4 pointsr/EDC
u/chip16 · 3 pointsr/Survival

I have one of these in a cheap Zippo because I prefer them over bics. I carry both in my pack. But, the ease of the butane makes me prefer this for long-term storage.

u/lurker_to_poster · 3 pointsr/cigars

Yes.

And as YNWA said, I have no experience with this one either, but when I googled "butane insert for zippo lighter," this is what came up first;, the soft flame PlumpCigarsTX posted came up second, and I didn't even get the one that YNWA posted. so you may have to do a little research on your own, but a butane insert for a zippo lighter body is what you're looking for.

u/spaok · 3 pointsr/cigars

For cigars, you could get the reddit sampler or one of the mystery packs.

While zippo's aren't ideal, you can get a Navy one and replace the insert with a torch one, I have a thunderbird one and it works ok. I had to wrap it in one layer of electrical tape, but it was most likely my zippo case being really old and cheap.

For a cutter you can get a cut and smoke combo, not a bad deal.

u/Styvorama · 2 pointsr/cigars

My lighter is a zippo with the butane torch insert, works really well. I also have a soft flame insert for it, but favor the torch.

This is the torch one I have It's pretty damn cheap if you already have the zippo case to use.

u/Cigarsmoker7 · 2 pointsr/cigars

Yes yes and yes... I use a butane soft flame insert for mine http://www.amazon.com/gp/aw/d/B003IRLBUA/ref=mp_s_a_1_4?qid=1404182091&sr=8-4&pi=AC_SX110_SY165_QL70 I love it but I'm a sucker for soft flames and cigars. I believe it is actually designed for pipes but I really like it. I've also used a Vector butane torch insert http://www.amazon.com/gp/aw/d/B008Z8W714/ref=mp_s_a_1_2?qid=1404182091&sr=8-2&pi=SY200_QL40 I love having the feel and weight of a zippo with the refinement of a butane torch. Either of those options will treat you right, you just have to pick your type of flame :) Cheers!

u/J_kins · 2 pointsr/Dynavap

I use a butane torch insert so I can have the size convenience of a Zippo but the power of a single flame torch. https://www.amazon.com/Vector-Thunderbird-Butane-Torch-Insert/dp/B008Z8W714

u/Epsilon748 · 2 pointsr/wicked_edge

This just came up on /r/edc yesterday. I'm in the same boat as you, I carry a Zippo (don't smoke though) and it evaporates after 2ish weeks. I don't mind refilling it, but you can also pick up the butane insert that solves that problem.

u/bigbrutal · 2 pointsr/Zippo

I was frustrated by the evaporation too. I picked up a thunderbird butane insert. It's worked out very well. I have both.

Butane torch:
http://www.amazon.com/Vector-Thunderbird-Butane-Torch-Insert/dp/B008Z8W714

Reg flame
http://www.amazon.com/Butane-Lighter-Insert-Flip-top-Lighters/dp/B003IRNUQI/ref=pd_bxgy_hpc_img_z

u/FToThe3rdPower · 2 pointsr/Bushcraft

You can buy gas torch inserts for them so you can still keep the cool sound (and look) with the reliability of a modern butane torch.

u/EnragedSpoon · 2 pointsr/vaporents

Here's the link to the clipper lighter, and the zippo insert. Two minor complaints I already have about the clipper compared to the zippo is that it seems to get much hotter, and you can't see the fuel level. One person also mentioned that pocket lint got into the lighter hole in the clipper and messed with the flame but I haven't experienced that

u/Pfeffersack · 2 pointsr/Zippo

>Do you mind checking the video in the link out cuz I tried many times to turn it on and when it finally does the flame goes off in a couple of seconds.

Yeah, not enough fuel.

>Mind sharing some pictures ?

https://www.youtube.com/watch?v=tDqc_kq79II

Maybe it adds another day of not having to put fuel in it. That's just how Zippos are. If it bothers you you may want to check out butane inserts.

u/congressmanish · 2 pointsr/EDC

If you like the feel of a Zippo lighter but want the non leaking and straight butane light look into these Vector Thunderbird Butane Torch Insert https://www.amazon.com/dp/B008Z8W714/ref=cm_sw_r_cp_apa_i_piHyDbPFG790Y
awesome setup, victorinox is great stuff. If you want something to add think about flashlights. Save your phone's battery life and are much brighter (if you get the right one) but for me the flashlight is the most useful thing in my edc

u/Franks_friend_Huey · 2 pointsr/EDC
u/SecureFunny · 1 pointr/Dynavap

I got the thunderbird single flame:
Vector Thunderbird Butane Torch Insert https://www.amazon.com/dp/B008Z8W714/ref=cm_sw_r_cp_apa_i_wpjaBbFZ48VEX

Sorry if the link doesn't work, I'm on mobile.

u/_Brazenhead_ · 1 pointr/Zippo

I'm a bit late to this post, but I'll throw in my 2 cents anyways.

I've had a few of them and overall would recommend them. They're great for what you're trying to accomplish.

The first one I bought was the flint-and-wheel with soft flame model. That worked well but after a few months, I began to have real problems with the flame being unusable. My suspicion is that flint particles fouled up the nozzle. I'm sending that one in on warranty.

Then I bought the single torch model, as well as a Vertigo brand Z-Plus 2 Extreme. They both are good. The Thunderbird worked well and I never had problems with it. Ended up giving that one to a friend. I liked the Z-Plus a little bit better. It had two torches angled inward at each other, and it also had a transparent tank so you could easily see your fuel level. The Thunderbird fit better into my Zippo cases, but the Z-Plus was fine after I bent the piece of metal inside of the lid that catches the cam.

Thought I was set with that Z-Plus and I was for a while, but then I found out that there was a Thunderbird model that had both a single jet torch as well as a soft flame, and it was not flint-ignited. That is the one I've been EDC'ing ever since. It's fantastic and I couldn't recommend it more highly.

u/Oakroscoe · 1 pointr/bifl

I have had very bad luck with butane lighters. I think I have gone through close to 10 in the last few years. Ironically, the cheapest one (an insert for an old zippo lighter that I had) has worked the best:
http://www.amazon.com/Vector-Thunderbird-Butane-Torch-Insert/dp/B008Z8W714/ref=pd_sim_236_2?ie=UTF8&dpID=41GAkrwKV0L&dpSrc=sims&preST=_AC_UL160_SR133%2C160_&refRID=13M7JP5H64VSTW2J56ZK

It's easy to refill and very easy to adjust the flame height. I've only had it for 3 months, so I can't give a long term review on it, but I've liked it a lot so far.

u/TruAwesomeness · 1 pointr/Zippo

Get yourself a case (knock off or authentic) and put this in it: https://www.amazon.com/Vector-Thunderbird-Butane-Torch-Insert/dp/B008Z8W714

Single torch like you specified. Butane burns pretty hot (hotter than naphtha which is used in standard Zippos and can leak from an over filled lighter), plus it's hermetic so no need to worry about constant refuelling no matter how rarely you use it.

Sounds like your friend got a piezoelectric lighter, which is imho far more effective for the 'torch' mechanism than flint and steel. You can use a spark wheel for the same effect but getting a flame can be difficult and it feels awkward in your hand which is why there aren't many on the market.

Plenty of blue steel cases out there. Good luck on that snake bit.

u/Virisenox_ · 1 pointr/flashlight

I have one of these things. Now I just need to find a coin that's mostly copper...

u/TechnoGarrett · 1 pointr/PCSleeving

I used TechFlex 1/8" 25 feet from Amazon.

I used VKTech heatshrink.

I could have done a much better job on the heatshrink on both ends of the cable, however I didn't have time to use my heat gun so I used my Zippo with a Thunderbird butane insert.

It turned out pretty good in my opinion, however like I said, I could have done a much better job.

u/LoneBear1 · 1 pointr/preppers

I have a Vector Thunderbird insert in my zippo. I bought it three years ago and haven't needed to fill it since I installed it. Evaporation is not a problem.

https://www.amazon.com/dp/B008Z8W714/ref=cm_sw_r_cp_awdb_t1_1BMADbAD50BDF

Also, while they are one time use, the Orion fire pit pro works reeeeeaaally well.

https://www.amazon.com/dp/B07K7RCVBG/ref=cm_sw_r_cp_awdb_t1_kFMADbEZEJZ6S

u/Elderbury · 1 pointr/Dynavap

this is the one I ordered: https://www.amazon.com/Vector-Thunderbird-Butane-Torch-Insert/dp/B008Z8W714

It's a 3rd party insert for a zippo. Cost me about $10, I believe. Butane is much better than zippo fluid, which leaks and dries out quickly.