Reddit reviews VViViD XPO Black Carbon Fiber 5ft x 1ft Car Wrap Vinyl Roll with Air Release Technology
We found 16 Reddit comments about VViViD XPO Black Carbon Fiber 5ft x 1ft Car Wrap Vinyl Roll with Air Release Technology. Here are the top ones, ranked by their Reddit score.
This premium automotive vinyl by VViViD Vinyls is specially engineered for DIY'ers. This durable film is ideal for long-term fleet and motorsport marketing applications, and provides a lightweight, economical alternative to paint.At 3.9mils in thickness, the film will stretch and conform to any shape and thick enough that discoloration, stretch marks and other visible defects when wrapping and driving are kept to a minimum.This product has built in VViViD Air Release, VViViD Resist, and VViViD Heat Fuse technologies to support the DIY'ers and the professional look of the completed quality. See the product description below for the details about these technologies.Application: Dry. Adhesive : Solvent-based, repositionable, permanent adhesive. Life: This vinyl is expected to easily last 5-7 years outdoors.This Vinyl can be installed using 3M 94 Primer and 3M Edge sealer, these are not mandatory, these products will promote adhesion and add life to your vinyl. The sealer or primer will not remove the glue, deform the vinyl or ruin the texture unlike cheaper quality films.
Here is a pic of my Index and a link to the amazon carbon fiber vinyl wrap I used.
You could always put the io at the back, put a vinyl decal to cover the bottom (now front) and add some feet with a 90° PSU cable connector.
$10 for vinyl wrap or a cut to size sheet of acrylic and some double sided tape.... Or leave it is is lol
$10- Tall adhesive feet (could go shorter for cheaper, but you want them tall to fit the PSU extension)
$3 low profile PSU extension (these are lower profile than what you'll find on Amazon... I spent a few days looking lol) Other super low profile connectors can be found on taobao and purchased through super buy
So an additional ~$25 to make it work... But that's up to you if you want to go that route. :)
Parts:
If you just want to plug it in without a battery, you can just use a cheap 12 power source like this one:https://www.amazon.com/inShareplus-Mounted-Switching-Connector-Adapter/dp/B01GD4ZQRS/ref=sr_1_4?crid=2T2QLKKWS5A2A&keywords=12v+power+supply&qid=1569933646&s=lawn-garden&sprefix=12v+power%2Clawngarden%2C160&sr=1-4
​
Total without lipo - $97, with battery power, add another $20. I bet if you get these parts of alibaba, you can save quite a bit of $$$
I used an adhesive vinyl leather like material to cover it. I bought it from amazon. Here is the link:
https://www.amazon.com/VViViD-Black-Carbon-Release-Technology/dp/B00L9J4JRG?ref_=ast_bbp_dp
Make sure to clean the case very well so it will be easier for the adhesive to stick to the wood.
The top layer is just the regular plexi, but I threw a cheap $10 vinyl wrap on.
The switches on the front are cherry rocker switches, which you can get here and here, although mine aren't connected since I don't really find the tournament lockout or LS/DP/RS switcher useful.
https://www.amazon.com/gp/product/B00L9J4JRG/ref=oh_aui_search_detailpage?ie=UTF8&psc=1
So I just pulled the trim off by looking up some YT videos and then took the glossy trim out and then wrapped it with a basic 3M style vinyl wrap (link below). To pull the trim be careful not to pull in a odd angle, can crack or rip out the plastic tabs.
I used a hair dryer to heat up the wrap and then pressed it to the plastic. You can use a heat gun as well if you'd like. I recommend using a wrap that has micro perforations so the air doesn't get trapped easily.
Sorry I took so long to reply :) If you have more questions just let me know! Also it is a 2014 Mazda, so not many videos on this year or later, mainly vids for '13 and earlier.
​
https://www.amazon.com/gp/product/B00L9J4JRG/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
It is carbon fiber vinyl wrap. This is what I used:
https://www.amazon.com/VViViD-Black-Carbon-Release-Technology/dp/B00L9J4JRG/ref=sr_1_4?crid=1KBYUH6GC51ZQ&keywords=carbon+fiber+vinyl&qid=1572292621&sprefix=carbon+fiber%2Caps%2C185&sr=8-4
The one I
used
Yeah, it's this one: https://www.amazon.com/dp/B00L9J4JRG/. I got the smallest one, 1 ft x 5 ft. I would really recommend ordering one of the squeegee smoothing cards also. I didn't have one, so I improvised with a card and it didn't work too well. I bought these for my next attempt: https://www.amazon.com/gp/product/B07PNPY5XX.
https://www.amazon.com/VViViD-Carbon-Featuring-Release-Technology/dp/B00L9J4JRG/ref=sr_1_1?ie=UTF8&qid=1550326138&sr=8-1&keywords=thick%2Bvinyl%2Bwrap&th=1 thats the one i got, its a tad thicker and still cheap. Hopefully it works ok. The problem with the wrap i have now is the adhesive sucks (also probably because i have silicone around the wire)
I used this: https://www.amazon.com/VViViD-Black-Carbon-Release-Technology/dp/B00L9J4JRG/ref=mp_s_a_1_3?keywords=vinyl+wrap&qid=1556736641&s=gateway&sr=8-3
But they have other colors and finishes. The material is nice, kind of like a rip stop fabric you’d find on a tent or something. Maybe not the best description. It is textured because it’s the carbon one, I imagine the others would be smooth. I’ve really liked the finish, it feels better on my hands and doesn’t get hot or tacky.
Could make a carbon fiber cover for the red parts, it just sticks on so it shouldn't void your warranty since you can just peel it off.
https://www.amazon.com/VVIVID-Black-Carbon-Release-Technology/dp/B00L9J4JRG/ref=sr_1_3?ie=UTF8&qid=1540315111&sr=8-3&keywords=carbon+fiber
It's just called vinyl wrap.
https://www.amazon.com/gp/aw/d/B00L9J4JRG/
just Carbon Fiber vinyl wrap, specifically: https://www.amazon.com/VViViD-Black-Carbon-Release-Technology/dp/B00L9J4JRG/ref=sr_1_4?crid=3HMGN62LX317P&keywords=carbon+fiber+vinyl+wrap&qid=1571797948&sprefix=carbon+fiver+v%2Caps%2C160&sr=8-4
https://www.amazon.com/dp/B00L9J4JRG/ref=cm_sw_r_oth_api_i_zsV2CbXCKFMHM