Reddit reviews WALI TV Wall Mount Articulating LCD Monitor Full Motion 14" Extension Arm Tilt Swivel for Most 13" 15" 17" 19" 20" 22" 23" 24" 26" 27" 30" LED TV Flat Panel Screen with VESA 100x100,75x75 1330LM
We found 21 Reddit comments about WALI TV Wall Mount Articulating LCD Monitor Full Motion 14" Extension Arm Tilt Swivel for Most 13" 15" 17" 19" 20" 22" 23" 24" 26" 27" 30" LED TV Flat Panel Screen with VESA 100x100,75x75 1330LM. Here are the top ones, ranked by their Reddit score.
Compatibility: Full motion heavy duty wall mount for most 13 to 30 inches flat panel display up to 33lbs, with VESA 75x75mm to 100x100mm. Detail: 75x75mm(3”x3”),100x100mm(4”x4”).Fully Adjustable: +/-15 degrees tilt; 180 degrees swivel and 360 degrees rotate for better-viewing flexibility.Space Save: Places TV just 2 inches from the wall to enhance the look of ultra-thin LED TV. Extends up to 14" from the wall for the space saving.Installation: 5.9” X 1.6” wall plate can be mounted on any vertical wood studs, brick, or concrete wall (Do NOT mount on drywall alone).Package Includes: 1 x WALI Articulating Wall Mount, 1 x Mounting Hardware Kit, 1 x User Manual, 10 Year Protection
Monitors are Asus VE248Q 24" with these wall mounts https://www.amazon.com/gp/product/B01BCUM766/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1
Thanks! I used this VESA mount kit with this wall mount. I also used a Sawzall to cut the iMac stand (which worked surprisingly well).
https://www.amazon.com/WALI-Articulating-Monitor-Extension-100x100/dp/B01BCUM766/ref=mp_s_a_1_7?ie=UTF8&qid=1549316374&sr=1-7&pi=AC_SX236_SY340_FMwebp_QL65&keywords=vesa+mount&dpPl=1&dpID=41kNW6EAVhL&ref=plSrch
I used this mount from amazon
Edit: if anyone is interested in getting this mount, be warned... The swivel joint for pivoting left and right was and still is super tight even after forcing it side to side with all my strength. But hey, it was cheap.
Did you hit a stud on your TV mount? Depending on the age of your home, your dry wall could be 3/8 or 1/2, which means you’ll want 2.5” lag bolts to ensure you’re getting the mount plus 1.5” into the wood. It should not budge. I have a TV mounted in the living room that comes out of a recessed hole meant for old tube style TVs. It extends 29” and is secured with 4 bolts on one stud. The TV weighs about 30 pounds and would have some serious downward force. Hit a stud and you’ll be good.
Here’s the one I put up that extends and rotates. mount
And here’s the TV mount I am using. I wouldnt suggest coming out of the wall as far as I do, but the stupid recessed area gave me no choice.
Tv mount
Thanks man, here’s the wall mount I used. Also mic is a blue yeti
https://www.amazon.com/dp/B01BCUM766/ref=cm_sw_r_cp_api_i_sAk0DbZ4922C7
WALI TV Wall Mount Articulating... https://www.amazon.com/dp/B01BCUM766?ref=ppx_pop_mob_ap_share
Two of these, vertically mounted on the same stud, with one of these on the bottom:
VIVO Dual VESA Bracket Adaptor... https://www.amazon.com/dp/B01CUSHR1O?ref=ppx_pop_mob_ap_share
Vertical Monitor: Acer XB270HU (One of the best monitors for 2560x1440p gaming) with mount
Main Monitor: Dell Alienware AW3418DW with mount
TV: Vizio E40-C2 with mount
Desk: Ikea Karlby 74" with Black Alex Drawers
PC:
EVGA GTX 1080 FTW DT
i7 6700K @ 4.4 GHz
2x8GB RIPJAWS V Ram
ASUS Z170A MOBO
Corsair LL120 Fans
NZXT S340 Case
​
If you want to know more specs lemme know!
I am using this mount. Hope this helps!
https://www.amazon.com/dp/B01BCUM766/ref=cm_sw_r_cp_apa_qER.BbMMXPCRW
Yep, the two outer monitors are on these https://www.amazon.com/gp/product/B01BCUM766/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
The center one is on this https://www.amazon.com/VideoSecu-Display-100x100-200x100-200x200/dp/B002TZ4CRG/ref=sr_1_4?ie=UTF8&qid=1486444614&sr=8-4&keywords=low+profile+tv+mount
Much cheaper and easier to align than getting the triple arm one, i hated it.
https://www.amazon.com/gp/aw/d/B01BCUM766/ref=yo_ii_img?ie=UTF8&psc=1 there a link to the mount. Doesnt tilt but it does the job. thank you!
https://www.amazon.com/gp/product/B01BCUM766/ref=oh_aui_detailpage_o00_s00?ie=UTF8&psc=1
Three of these wall mounts.
Thanks!! It’s very similar to this one
Any 100x100 mount works.
https://www.amazon.com/gp/product/B01BCUM766
Your set up is already rather compact.
For wall mounting just make sure you find the compatible VESA measurement, for monitors IIRC most common is 75mm x 75mm or 100mm x 100mm. Also there are 2 choices, one with adjustable arms or static ones just stuck to the wall. Without arm , With arm
I found this chair on a Jonathan Morrison video on youtube it looks great
Most mounts seem to work just fine. Here's a $12 wall mount
I cant find exactly the same one as mine (I bought it long time ago for my previous setup), but its almost the same as this one.
Some monitor mounts from Amazon. Kind of annoying to work with their bolts so I replaced them with toggle bolts from Home Depot. The mounts work great tho!
Go to the monitors page on the acer website and search for vesa mount on the specifications (yours is 100x100mm), the most common are 75x75mm and 100x100mm. btw "Vesa" are those holes in the back of your monitor, sometimes is where the stand screws are.
After knowing that its just a matter of searching for a mount with that size.
There are 2 types of wallmounts
This that can be moved closer to you if needed (I like this type as I have USB ports on my monitor and it helps to remove or insert them again, and you have a lot more freedom with this type)
And this that stays flush against the wall and you cant really move it (dont really recommend this type tbh)
Have you though about monitor arms tho? I just prefer them over wall mounts, no need to drill the wall and you still save a lot of space on your desk.
https://www.amazon.com/WALI-Articulating-Monitor-Extension-100x100/dp/B01BCUM766